Pelco S7818L-YB0US, S7818L-YB1, S7818L-YB1US, S7818L-YB0, S7818L-FW0US User Manual

...

Spectra Enhanced 7

PTZDome Cameras

Operations Manual

Document number:C6653M-B

Publication date:06/20

Spectra Enhanced 7 Operations Manual, PTZDome Cameras

Table of Contents

Important Notices 5

Regulatory Notices [Class A] 5

Radio and Television Interference 5

Warranty Statement 5

Legal Notice 5

Audio Notice 5

Video Quality Caution 5

Frame Rate Notice Regarding User Selected Options 5

Open Source Software 6

Power Source 6

Korean Class A EMC 6

ESD Warning 6

Accessing the Camera 7

Accessing Camera Settings 7

Understanding the Camera Configuration Sequence 7

Accessing the Live Video Page 8

Selecting Live View Controls 8

Running Patterns, Scans, Presets, and Preset Tours 8

PTZ Controls 8

Focus, Zoom, and Brightness controls 8 Viewing, Pan/Tilt, Streaming, and Snapshot Controls 9

System Menu 10

Configuring General Settings 10

Configuring Time Settings 10 Configuring GPSSettings 10 Generating a System Log 10 Restarting the Camera 10 Restoring All Camera Defaults 11

Backing Up and Restoring Settings 11

Backing Up Camera Settings 11 Restoring Camera Settings from a Backup 11

Locating System Information 11

Updating Firmware 11

Configuring OSDi Overlays 12

Snapshot Viewer 13

ManagingStorage 13

Viewing Device Information 13 Using Settings andActions 13 Configuring Local Recording 13 Exporting a Recording 13

Viewing Diagnostics 14

C6653M-B | 06/20

Spectra Enhanced 7 Operations Manual, PTZDome Cameras

Viewing Client Connections 14 Viewing Temperature Information 14 Viewing Power Information 14

Using the Network & Security Menu 15

Understanding General Network Settings 15

Network Hostname 15 Port Settings 15 IPv4 Settings 15 IPv6 Settings 15

Users and Security 17

Accessing Users and Security 17 Configuring Local Users 17 Setting Security/Authentication 17 Configuring TLS 18 Configuring Traffic Shaping 18 Configuring 802.1x Security 19 Configuring SNMP 19 Configuring Firewall Settings 20

Using the Imaging Menu 20

Restoring Imaging Settings 20

Configuring Image Enhancement 20

Image Enhancement 20 Digital Processing 21

Configuring Exposure Settings 21

Configuring WDR Settings 21

Enabling and Disabling Electronic Image Stabilization 22

Configuring Day/Night Mode 22

Configuring Focus Settings 22

Setting White Balance 23

Using Window Blanking 23

Configuring Options in the PTZMenu 24

Configuring Positioning 24

Configuring a Preset 25

Configuring a Preset Tour 25

Configuring Pan/Tilt/Zoom Patterns 25

Configuring Pan/Tilt/Zoom Scans 26

Configuring Pan/Tilt/Zoom Zones 27

Configuring Pelco Camera Link 28

Using A/V Streams Menu 28

Selecting Preset Video Configurations 28

C6653M-B | 06/20

Spectra Enhanced 7 Operations Manual, PTZDome Cameras

Configuring Presets 28 Configuring Custom Video Streams 29

Configuring Audio 30

Managing RTP Settings 31

Setting Static Multicast Addresses 31 Setting the Maximum Transfer Unit Size (TCP/IP) 31

Configuring Smart Compression 31

Configuring Long-Term Rate Control 32

Events 34

Configuring Sources 34

Configuring an Alarm Event Source 34 Configuring an Analytic Event Source 34 Configuring a Timer Event Source 35 Configuring a System Event Source 35 Configuring a Park Action Event Source 35 Configuring a Network Loss Event Source 35 Deleting an Event Source 35

Configuring Handlers 36

Configuring an Event Handler: Send Email 36 Configuring an Event Handler: Upload JPEG to FTP Server 36 Configuring an Event Handler: Write JPEG to SDCard 37 Configuring an Event Handler: Run Pattern 37 Configuring an Event Handler: Go to Preset 37 Configuring an Event Handler: Run Tour 38 Configuring an Event Handler: Run Scan 38 Configuring an Event Handler: Open/Close Relay 38 Configuring an Event Handler: Display Overlay 39 Configuring an Event Handler: Play Audio 39 Configuring an Event Handler: Write Recording to SDCard 39 Configuring an Event Handler: Upload Recording to FTP Server 40 Deleting an Event Handler 40

Analytic Configuration 40

Configuring Basic Analytics 41 Configuring Enhanced Analytics 41

Event Stream 47

Contacting Pelco for Troubleshooting 47

C6653M-B | 06/20

Spectra Enhanced 7 Operations Manual, PTZDome Cameras

Important Notices

Regulatory Notices [Class A]

This device complies with Part 15 of the (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Radio and Television Interference

This equipment has been tested and found to comply with the limits of a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Changes and modifications not expressly approved by the manufacturer or registrant of this equipment can void your authority to operate this equipment under Federal Communications Commission’s rules.

CAN ICES-3 (A)/NMB-3(A)

FCC Rules.

Operation is subject to the following two conditions:

Warranty Statement

For information about Pelco’s product warranty and thereto related information, refer to

www.pelco.com/warranty.

Legal Notice

SOME PELCO EQUIPMENT CONTAINS, AND THE SOFTWARE ENABLES, AUDIO/VISUAL AND RECORDING CAPABILITIES, THE IMPROPER USE OF WHICH MAY SUBJECT YOU TO CIVIL AND CRIMINAL PENALTIES. APPLICABLE LAWS REGARDING THE USE OF SUCH CAPABILITIES VARY BETWEEN JURISDICTIONS AND MAY REQUIRE, AMONG OTHER THINGS, EXPRESS WRITTEN CONSENT FROM RECORDED SUBJECTS. YOU ARE SOLELY RESPONSIBLE FOR INSURING STRICT COMPLIANCE WITH SUCH LAWS AND FOR STRICT ADHERENCE TO ANY/ALL RIGHTS OF PRIVACY AND PERSONALTY. USE OF THIS EQUIPMENT AND/OR SOFTWARE FOR ILLEGAL SURVEILLANCE OR MONITORING SHALL BE DEEMED UNAUTHORIZED USE IN VIOLATION OF THE END USER SOFTWARE AGREEMENT AND RESULT IN THE IMMEDIATE TERMINATION OF YOUR LICENSE RIGHTS THEREUNDER.

Audio Notice

Improper use of audio/visual recording equipment may subject you to civil and criminal penalties. Applicable laws regarding the use of such capabilities vary between jurisdictions and may require, among other things, express written consent from the recorded subjects. You are solely responsible for insuring strict compliance with such laws and for strict adherence to any/all rights of privacy and personality.

Video Quality Caution

Frame Rate Notice Regarding User Selected Options

Pelco systems are capable of providing high quality video for both live viewing and playback. However, the systems can be used in lower quality modes, which can degrade picture quality, to allow for a slower rate of data transfer and to reduce the amount of video data stored. The picture quality can be degraded by either

C6653M-B | 06/20

Spectra Enhanced 7 Operations Manual, PTZDome Cameras

lowering the resolution, reducing the picture rate, or both. A picture degraded by having a reduced resolution may result in an image that is less clear or even indiscernible. A picture degraded by reducing the picture rate has fewer frames per second, which can result in images that appear to jump or move more quickly than normal during playback. Lower frame rates may result in a key event not being recorded by the system. Judgment as to the suitability of the products for users' purposes is solely the users' responsibility. Users shall determine the suitability of the products for their own intended application, picture rate and picture quality. In the event users intend to use the video for evidentiary purposes in a judicial proceeding or otherwise, users should consult with their attorney regarding any particular requirements for such use.

Open Source Software

This product includes certain open source or other software originated from third parties that is subject to the GNU General Public License (GPL), GNU Library/Lesser General Public License (LGPL) and different and/or additional copyright licenses, disclaimers, and notices. The exact terms of GPL, LGPL, and some other licenses are provided to you with this product. Please refer to the exact terms of the GPL and LGPL at http://www.fsf.org (Free Software Foundation) or http://www.opensource.org (Open Source Initiative) regarding your rights under said license. You may obtain a complete corresponding machine-readable copy of the source code of such software under the GPL or LGPL by sending your request to digitalsupport@pelco.com; the subject line should read Source Code Request. You will then receive an email with a link for you to download the source code. This offer is valid for a period of three (3) years from the date of the distribution of this product by Pelco.

Power Source

This product is intended to be supplied by a Listed Power Adapter or DC power source marked “L.P.S.” (or “Limited Power Source”), rated according to the camera specification document. If you need further assistance with purchasing the power source, please contact Pelco, Inc. for further information.

Korean Class A EMC

ESD Warning

Warning: This product is sensitive to Electrostatic Discharge (ESD). To avoid ESD

damage to this product, use ESD safe practices during installation. Before touching, adjusting or handling this product, correctly attach an ESD wrist strap to your wrist and appropriately discharge your body and tools. For more information about ESD control and safe handling practices of electronics, please refer to ANSI/ESD S20.20-1999 or contact the Electrostatic Discharge Association (www.esda.org).

C6653M-B | 06/20

Spectra Enhanced 7 Operations Manual, PTZDome Cameras

Accessing the Camera

Note: For security purposes, it is required that you create a user account when you access the

camera for the first time. In its out-of-the-box configuration, the camera has no user name and password assigned. In this state the camera does not allow for video to stream or configurations to change. It is required that you set an administrative user name and password at this time. Creation of an administrative user changes the state of the camera to its “operational mode,” where credentials must be provided in order to view live video or change its configuration. This first user configuration can also be done in VxToolbox software.

There is no provision for recovering a forgotten administrator user name or password. The camera can be restored to its out-of-the-box, no user name and password configuration by powering down, depressing the Factory Defaults button, and holding the button down for at least four seconds while powering the camera back up.

Once the camera is powered back up the user will be prompted to create a username and password.

The recommended browsers for your camera are Mozilla® Firefox®, Google Chrome™, or Microsoft™Edge™ for Microsoft® Windows® operating systems; and Firefox for Mac® operating systems. For supported browser versions, refer to the Specification Sheet for your product.

1. Open a web browser.

2. Type the camera’s IP address or host name in your browser’s address bar and then click Enter.

Note:

You can obtain your camera’s IP address or access the camera using VXToolbox

software.

3. If a user name and password exist, a log in dialog box appears. Otherwise a user creation dialog box appears, and the user will be required to create an administrative user to proceed.

Accessing Camera Settings

Access to camera settings is determined by user permissions. If you do not have access to camera settings, the Settings option will not appear in the top-center of the Live View window.

1. Click the gear symbol at the top center of the viewing window.

2. Select the setting you want to change. Place your mouse pointer over any tab on the page to reveal submenus.

Understanding the Camera Configuration Sequence

After the camera is installed and power is applied, the camera undergoes a configuration sequence, taking approximately 30-seconds to complete. The camera will come online after the configuration sequence is complete.

Note: If the camera connected to a network without a DHCP server and DHCP is enabled, the configuration sequence can take up to two minutes to complete.

C6653M-B | 06/20

Spectra Enhanced 7 Operations Manual, PTZDome Cameras

Accessing the Live Video Page

The live video page provides access to video streams and, where applicable, to PTZ controls.

By default, the camera does not have any pre-configured users. When a user is added to the system, that user must login before accessing the Live View. After logging in, the user will have access to the Live View from that point forward.

Selecting Live View Controls

Viewable controls are based on device model and user permissions. Use the drop-down menu to select the Primary, Secondary, and Tertiary streams from the live view. The JPEG Stream is a predefined low resolution, low frame rate JPEG stream. JPEG is helpful for users with bandwidth or processing limitations that could cause a high resolution, high frame rate video stream to pause or pixelate.

Caution:Streams must be configured to use the H264 compression standard. Streams with any other compression standard will not be available for selection.

If the secondary or tertiary stream has not been configured, they will not be available for selection.Video streams can be configured under the A/V Streams Menu. Only H264 streams are supported for full- resolution streaming. If the user selects H265 or MJEG as their encoding, the stream is also not available on the Live View.

Running Patterns, Scans, Presets, and Preset Tours

1. Click the preset name from the Patterns, Scans, Presets, or Preset Tours list.

Note

: Only preconfigured patterns are available for selection. Go to the

patterns, scans, presets, and tours.

2. Click Go to run the preset.

3. Click Stop to discontinue the preset.

PTZ

menu to configure

PTZ Controls

PTZ Controls are based on camera model and user permissions.

Focus, Zoom, and Brightness controls

From left to right, the sliders represent:

l Zoom: Set the zoom position (The blue area is digital zoom and it is only present if digital zoom is

enabled under the PTZ menu).

C6653M-B | 06/20

Spectra Enhanced 7 Operations Manual, PTZDome Cameras

Note: You can also use the mouse scroll wheel to zoom in and out.

l Focus: Set focus position.

l Brightness: Click and hold to close the iris and darken the image.

Viewing, Pan/Tilt, Streaming, and Snapshot Controls

Note: PTZ controls are available only after you have logged in to the camera.

From left to right, the icons represent:

l Resize Viewing Area: Allows you to zoom in on an area of interest. Click the icon and then draw a

box to designate the area in which you want to center the camera’s field of view and zoom in.

l Center Viewing Area: Engages click-to-center functionality. Click the icon and then click the

location in which you want to center the camera’s field of view.

l Pan and Tilt: Engages pan and tilt functions. Click the icon, and then click and drag the mouse

within the video stream to pan and tilt the camera.

l Pixel Counter: Enables tool on the viewer to calculate pixels in the area of the adjustable box.

l Open Stream in New Window: Opens the video stream in an independent window.

l Take a Snapshot: Captures a still image from the video stream and saves as a JPEG file.

C6653M-B | 06/20

Spectra Enhanced 7 Operations Manual, PTZDome Cameras

System Menu

The System menu provides access to the General Settings, Backup and Restore, Firmware, OSDi, Snapshot Viewer, Storage Management, and Diagnostics pages.

Configuring General Settings

1. Device Name: Configure the name for your device. Names can contain up to 63 alphanumeric characters. At least one character in the host name must be a letter.

2. Enable LEDs: Enable or turn off LED camera lights.

3. Power Priority: Select a priority power supply as either 24v or Power over Ethernet (PoE).

4. Click Save.

Configuring Time Settings

You can set your camera to discover a network time server (NTP) automatically, manually provide the address of your network time server, or select no time server.

1. Select your time server setting:

l Auto: Allows your camera to discover and synchronize with your network time server (over

IPv4 or IPv6).

l Manual: Requires you to provide the address of your network time server.

l None: Camera date format defaults to mm/dd/1970.

2. Select the TimeZone.

3. Click Save.

Configuring GPSSettings

Use the GPS Settings option to establish the camera’s GPS location.

1. Manually enter the Latitude, Longitude, and Elevation of the camera.

2. Click Save.

Generating a System Log

If technical difficulties occur, a system log might help Pelco Product Support troubleshoot problems with your camera. You can contact Pelco Product Support at 1-800-289-9100 (USA and Canada) or +1-559-2921981 (international).

1. Select General Settings from the System menu.

2. Click Generate System Log.

3. Select the location in which to save the log file.

4. Click Save.

Restarting the Camera

If you are recording video from your camera, restarting the camera will cause a gap in video recording. It is important that you schedule maintenance before restarting the camera.

1. Select General Settings from the System menu.

2. Click Reboot Camera.

C6653M-B | 06/20

Spectra Enhanced 7 Operations Manual, PTZDome Cameras

Restoring All Camera Defaults

If necessary, you can reset your camera settings to the factory defaults.

1. Click Restore All Camera Defaults and choose one of two options:

l Soft Restore will reset the camera back to factory defaults with the exception of network

settings. All user settings and customizations will be lost and cannot be recovered.

l Hard Restore will reset the camera back to factory defaults. All user settings and

customizations and network settings will be lost and cannot be recovered.

Backing Up and Restoring Settings

Go to the System page and click the Backup and Restore tab.

If you accidentally change a setting or need to recover from a factory reset, you can back up and restore your device configuration. Camera backup files are stored in bin format.

Note: The restore feature is not intended to automatically configure multiple devices or to recover settings following a firmware upgrade.

Backing Up Camera Settings

1. Click Generate Backup File

2. Click Download Now, and then specify the directory in which to save your backup file.

3. Click OK to save the backup file.

Restoring Camera Settings from a Backup

1. Click Browse,and then click to select the backup file.

2. Click OK.

3. Click Choose File, and then locate the device's backup file.

4. Click Upload and Restore; to restart the camera and restore the camera settings.

Locating System Information

The information settings page includes read-only fields for the Firmware Version, Hardware Version, Model

Number, and Serial Number of the camera. This information is typically required by Pelco Product Support

for troubleshooting purposes.

Updating Firmware

Go to System > Firmware to access System Information and perform Firmware Updates.

System Information includes read-only fields for the firmware version, hardware version, model number, and serial number of the camera. This information is typically required by Pelco Product Support for troubleshooting purposes.

The camera firmware can be upgraded or downgraded.

1. Click Browse to select the firmware you would like to upgrade/downgrade (ppm file).

2. Click Upload.

Note: Upgrading to version 3.3.x.x firmware requires user(s) to exist on the camera. Otherwise, the firmware update will fail.

C6653M-B | 06/20

Spectra Enhanced 7 Operations Manual, PTZDome Cameras

Configuring OSDi Overlays

The OSDi (Intelligent On Screen Display) feature allows the camera to show pertinent information as an overlay within the field of view. Depending on your camera and model, you can define up to four overlay rules.

If using the Current Zone Label overlay, and multiple zones are in the field of view, the camera will display the labels in order of size, smallest to largest; if all zones in the field of view are the same size, the camera will display zone labels in order of creation, oldest to newest.

The camera will display the label in the active zone until the camera’s field of view moves outside the zone. You can set the Duration of the display as Indefinite or, alternatively, you can define a number of seconds for the Current Zone Label to be displayed.

1. Go to the OSDi page from the System menu.

2. Hover in the viewing window to display Upper Left, Upper Center, Upper Right, Middle Left,

Middle Center, Middle Right, Lower Left, Lower Center, Lower Right buttons. Click the button

representing the location in which you want to display the overlay.

3. Use the Overlay Type pull-down menu to choose between the following overlay types:

l Plain Text: Enter a plain text string of your choice.

l Camera Name: Display the camera’s name.

l Camera Name/Date/Time: Display the camera’s name, date, and time.

l Date/Time: Display the camera’s date and time.

l Date: Display the camera’s date.

l Time: Display the camera’s time.

l Event Source: Display an event source on the overlay using a pre-defined Event Source and

associated Handler. Under the Steps to Enable Overlay section, click the Manage Handlers or Manage Sources link. This will take you to the Handlers and Sources page under the Events tab in which you can establish or change the settings for Event Source.

l PTZ Position: Display the current PTZ Position in the format of Pan°/Tilt° ZoomX Direction.

You can set the Duration of the display as Indefinite or, alternatively, you can define a number of seconds for the PTZ Position to be displayed on the overlay after movement stops.

l Acquired PTZ Preset: Display the name of a PTZ Preset as defined in the PTZ Preset

Settings. This will only display as long as the preset is acquired by the camera. You can set the Duration of the display as Indefinite or, alternatively, you can define a number of seconds for the PTZ Preset Name to be displayed after the Preset is acquired.

l Current Zone Label: Display the label of the current zone. If a Current Zone Label has not

been defined, click the Manage Zones link to go to the PTZ Zones tab where you can establish or create new zones. Under the Duration section, you can select the option to display the current zone label indefinitely or establish a specific length of time (in seconds) for which to display the current zone label.

l Image: Select an Image File to display by clicking Choose File and traversing to the local

directory in which your image file is stored.

4. Click Save.

C6653M-B | 06/20

Spectra Enhanced 7 Operations Manual, PTZDome Cameras

Snapshot Viewer

The Snapshot Viewer page displays a list of snapshots saved to the SD card when a “Write JPEG to SD Card” event handler is activated. Video is saved to the SD card when a Write Recording to SD Card handler is activated. The saved video segments can be downloaded from the Snapshot Viewer page.

1. Select the viewing option by choosing from Select Visible, Deselect Visible, Select All, Deselect

All, Delete Selected, Download Selected, or Refresh List.

2. Use the Search box to find the snapshot of your choice on the SD card.

3. Click the Show drop-down menu to select the number of files to show per page. The default setting is 15, however up to 100 snapshots can be displayed. Maneuver through the snapshots or pages using the arrow buttons (<, <<, >, >>).

ManagingStorage

Go to System > Storage Management to access and/or manage Device Information, Settings and Actions, Local Recording, and Export Recordings.

Viewing Device Information

Device Information provides information for the SD card. The following information will be displayed when an SD Card is properly installed:

l Device Type: SD Card

l Free Space: Expressed in MB

l Total Size: Expressed MB

l Status: Ready to begin recording

Note: If there is no SD card in the camera or it was not properly installed, the Status will display "There is no media in the SD card."

Using Settings andActions

l Device Format: displays the device format with the option to reformat the device.

l SD Allocation: Use the slider bar to establish how much storage to allocate between Edge and

Clip storage.

Configuring Local Recording

The number of hours of video you can store on the SD card is established with recording bit limits. A bit rate limit below 1.5 Mbps allows a maximum of 48 hours of video at 30 fps regardless of resolution. You can increase the maximum available hours of storage by decreasing the frame rate.

Note: Disabling Local Recording will impact “Write Recording to SD Card” or “Upload Recording to FTP Server” event handlers if they are configured.

Exporting a Recording

1. Enter the Start Date and Start Time as well as the End Date and End Time manually into the

Date/Time fields or use the calendar icons to set dates and times.

A menu will show the range of recordings available for export based on your specified dates and times.

2. Click Export.

C6653M-B | 06/20

Spectra Enhanced 7 Operations Manual, PTZDome Cameras

Note: Exports are limited to 15-minute clips.

Viewing Diagnostics

Go to System > Diagnostics to get information on Power, Client Connections and Temperature.

Viewing Client Connections

Client Connections displays the number of active streams by Client Address, Stream type, and Duration.

Viewing Temperature Information

The Temperature setting displays the current processor temperature along with a graphical display of the Maximum, Minimum, and Average Processor Temperature (C°) for the current session and historical sessions.

Viewing Power Information

The current Input Voltage and Power Usage statistics are displayed within the Power section of the Diagnostics display. Maximum, Minimum, and Average Input Voltage (mV) and Power Usage (mW) statistics are graphically displayed for the current session and historical sessions.

C6653M-B | 06/20

Spectra Enhanced 7 Operations Manual, PTZDome Cameras

Using the Network & Security Menu

The Network & Security menu provides access for configuring Network settings, Users & Security, TLS,

Traffic Shaping, 802.1x, SNMP, and Firewall. You have the option of changing ports and adding firewall

rules. By default, your device receives an address over DHCP, and all other network features are disabled.

Understanding General Network Settings

Network Hostname

You can configure a host name for your camera containing up to 63 alphanumeric characters. At least one character in the host name must be a letter.

Port Settings

Port settings determine the ports over which users communicate with the camera.

HTTP: Do not change the HTTP when connecting to a Pelco video management system (VMS); doing so might prevent you from viewing or recording video from your imaging camera. The default HTTP port is 80.

Note:Do not change the HTTP port when connecting to a legacy Pelco video management system, as this may prevent you from viewing or recording video from your imaging device.

HTTPS: Set TLS to Optional or Required and install a security certificate before altering the HTTPS port. The default HTTPS port is 443.

RTSP: Cameras communicate with video management systems over RTSP. Do not change the RTSP port. The default RTSP port is 554.

IPv4 Settings

By default, cameras are configured to obtain network settings over DHCP. If a DHCP server is not available, the camera defaults to an address of 192.168.0.20 on a 255.255.255 subnet. If 192.168.0.20 is already in use on the network, the camera will increment the address by one until it finds an unused address (for example,192.168.0.21 if 192.168.0.20 is in use).

Set DHCP to Off to configure a static address and manually set the subnet mask, gateway, and DNS Server settings.

IPv6 Settings

(Optional): Your camera supports IPv6 configurations in conjunction with IPv4; the device does not support IPv6-only network deployments. The camera will accept up to sixteen IPv6 addresses, three IPv6 DNS servers, and three IPv6 gateways.

There are two configuration modes for IPv6 address assignment:

l Auto: Enables automatic configuration using router advertisement. Additional configuration can be

provided over DHCPv6 (if available on your network). Selecting Auto still allows you to manually configure additional address, DNS servers, and gateways.

l Manual Only: Provides a link-local address for the device, and it requires you to manually configure

all other IPv6 address settings for the camera. Manually specified addresses require a prefix and must be input in the format prefix/IPv6Address. The camera will reject addresses that do not contain prefix information.

Note:

– Cameras do not accept multicast, localhost, or undefined IPv6 addresses.

C6653M-B | 06/20

+ 33 hidden pages