HIGH-SPEED PTZ, UP TO 30X, UP TO 4K, SUREVISION AND DEEP LEARNING CAPABLE
Product Features
• SureVision Technology, Including:
– Up to 130 dB Wide Dynamic Range (WDR)
– Advanced Low Light Down to 0.02 lux (Color), 0.013 lux (Mono)
– Anti-Bloom Technology
– 3D Noise Filtering
– Enhanced Tone Mapping
• Up to 4K and u
• Robust Image Stabilization (EIS) with Gyro
• Built-in Pelco Enhanced Analytics Suite
• Pelco Advanced Analytics Capable
• Power over Ethernet (802.3bt), 24 VAC, 48 VDC
• H.264 and H.265 Pelco Smart Compression Technology
• Three Automatic Defog Options
• Vandal Resistant IK10 Housing and Smoked or Clear Bubble
• SD Card Slot with Support for SDXC Cards
• Compatible w
p to 60 Images per Second (ips) Pan/Tilt Drive
• ONVIF Profile S, Profile G, and Profile T Conformant
• 3-Year Warranty and Support
ith Pelco and Third-Party Video Systems
Top of the Line IP Performance
Pelco’s Spectra® Series of high speed IP PTZ domes provide top tier
image quality, performance, and intelligent embedded features for stateof-the-art surveillance solutions. Low latency video and control make the
camera incredibly easy to control. Direct Drive closed loop control
enables blazing pan and tilt speeds
the camera on target avoiding perceived PT delays so that critical
forensic evidence is captured. Direct Drive closed loop systems have
advantages such as limited wear and tear and maintenance, extremely
accurate positioning, and the camera always knows its position.
Power redundancy between PoE and 48 VDC/24 VAC ensures 24-hour,
365-day continuous oper atio n even unde
situations.
up to 700 degree/second to position
r unst able power supply
Full High Definition SureVision Cameras
Spectra Enhanced Series IP PTZ domes feature up to 4K, up to 30x optical
zoom. They run at up to 60 frames per second and provide up to 130dB of
Wide Dynamic Range (WDR) with Pelco’s latest SureVision low light
performance.
Intelligent Imaging Features
The Spectra Enhanced Series PTZ domes have the capability to run deep
learning DNN analytics. Included in all models are a Pelco Enhanced
Suite
of analytics including: Abandoned Object, Ada ptive Motion
Detection, AutoTracker, Camera Sabotage, Directional Motion, Loitering
Detection, Object Counting, Object Removal, and Stopped Vehicle.
Spectra Enhanced also allows for up to 16 window blanking privacy
zones that are configurable with custom blurring options. Three levels of
Image Defog provide options for enhancing the image on foggy or rainy
da
ys. Five White Balance modes are available for overcoming difficult
lighting conditions day and night. A Vivid Imaging mode can be enabled
to automatically increases color saturation and sharpening. Spectra
Enhanced supports up to 2TB of onboard local storage (not supplied) that
is easily accessible through the ONVIF Profile G protocol or FTP.
Intuitive Design
Spectra Enhanced Series features the same ease of installation and
maintenance that the industry has come to expect from Spectra. Each
dome system consists of a back-box, a dome drive, and an IK10 rated
lowe r dome. There is a choice o f three form f act ors: in-ce il ing ,
environmental in-ceiling, and environmental pendant.
VMS Integration
Spectra Enhanced Series easily connects to Pelco IP and hybrid video
systems such as VideoXpert, Endura 2.0 (or l
(or later). The camera is also compatible with Digital Sentry NVS (DS
NVS), a full-featured video management software, which is available as
a free download at www.pelco.com. DS NVS includes four free Pelco IP
licenses and allows for the management of video from up to 64 cameras.
Pelco endeavors to be the most open and integrated camera provider in
the industry and as a pa
with a long and ever-growing list of 3rd party software and Video
Management Systems (VMS).
rt of that effort Spectra Enhanced is integrated
ater), and Digital Sentry 7.3
C5005S / New 6-02-20
BACK BOX FEATURES
NOTE: VALUES IN PARENTHESES ARE INCHES; ALL OTHERS ARE CENTIMETERS.
In-Ceiling (Indoor 4K)
• Single Back Box for Suspended or Hard
Ceiling Applications with White Trim
Ring, RAL9003
• Requires 13.35 cm (5.25 in.) Space
Above Ceiling and 8.25 cm (3.25 in.)
Below
• Minimum Ceiling Thickness 1.27 cm
(0.50 in.); Maximum 4.45 cm (1.75 in.)
• Aluminum Construction, IK10 Rated
Housing and Polycarbonate Bubble
le for Use in Environmental Air
• Suitab
Handling Spaces
• –10° to 55°C (14° to 131°F) Sustained
Operating Temperature
In-Ceiling (Indoor 2MP)
• Single Back Box for Suspended or Hard
Ceiling Applications with White Trim
Ring, RAL9003
• Requires 13.35 cm (5.25 in.) Space
Above Ceiling and 8.25 cm (3.25 in.)
Below
• Minimum Ceiling Thickness 1.27 cm
(0.50 in.); Maximum 4.45 cm (1.75 in.)
• Aluminum Construction, IK10 Rated
Housing and Nylon Bubble
• Suitable f
• –10° to 55°C (14° to 131°F) Sustained
Operating Temperature
or Use in Environmental Air
Handling Spaces
Environmental Pendant (4K)
• Environmental Pendant Available in
White Finish (RAL9003) or Black Finish
(RAL9017)
• Aluminum Construction, IK10 Rated
Housing and Polycarbonate Bubble
• Meets IP66 and IP67
• Meets Type 4X
• Uses 1 1/2-inch NPT Thread
• Includes Heater, Blower, and Sun Shield
• –50° to 60°C (–58° to 140°F) Sustained
Operating Temperature
Environmental Pendant (2MP)
• Environmental Pendant Available in
White Finish (RAL9003) or Black Fi
(RAL9017)
• Aluminum Construction, IK10 Rated
Housing and Nylon Bubble
• Meets IP66 and IP67
• Meets Type 4X
• Uses 1 1/2-inch NPT Thread
• Includes Heater, Blower, and Sun Shield
• –50° to 60°C (–58° to 140°F) Sustained
Operating Temperature
nish
In-Ceiling (Environmental 4K)
• Single Back Box for Suspended or Hard
Ceiling Applications with Black Trim
Ring, RAL9017
• Requires 13.35 cm (5.25 in.) Space
Above Ceiling and 8.25 cm (3.25 in.)
Below
• Minimum Ceiling Thickness 1.27 cm
(0.50 in.); Maximum 4.45 cm (1.75 in.)
• Aluminum Construction, IK10 Rated
Housing and Polycarbonate Bubble
• Meets IP66 and IP67
• Meets Type 4X
• Includes Heater and Blower
• –50° to 60°C (–58° to 140°F) Sustained
ating Temperature
Oper
In-Ceiling (Environmental 2 MP)
• Single Back Box for Suspended or Hard
Ceiling Applications with Black Trim
Ring, RAL9017
• Requires 13.35 cm (5.25 in.) Space
Above Ceiling and 8.25 cm (3.25 in.)
Below
• Minimum Ceiling Thickness 1.27 cm
(0.50 in.); Maximum 4.45 cm (1.75 in.)
• Aluminum Construction, IK10 Rated
Housing and Nylon Bubble
• Meets IP66 and IP67
• Meets Type 4X
• Includes Heater and Bl
• –50° to 60°C (–58° to 140°F) Sustained
Operating Temperature
ower
CAMERA/OPTICS
Specification30X Low Light18X Low Light
Sensor TypeProgressive, 1/2.8-inch Type Exmor CMOS SensorProgressive, 1/1.8-inch CMOS Sensor
Optical Zoom30X18X
Digital Zoom10X10X
Maximum Resolution1920 x 10803840 x 2160
Lensf/1.6 ~ f/4.7, focal length 4.3 mm (wide) ~ 129.0 mm (tele)f/1.5 ~ f/3.4, focal length 6.36 mm (wide) ~ 138.5 mm (tele)
Wide Dynamic RangeUp to 130 dB maximum; 120 dB per IEC 62676-5 Up to 130 dB maximum; 120 dB per IEC 62676-5
Iris ControlAuto iris with manual overrideAuto iris with manual override
Backlight CompensationYesYes
Automatic Gain ControlYesYes
Active Noise Filtering3D Noise Filtering3D Noise Filtering
Electronic
Bit Rate ControlConstrained variable bit rate (CVBR) and constant bit rate (CBR)
Video SnapshotJPEG capture at the same resolution as the highest stream configured
Window Blanking16 configurable Windows
Video Overlay
Flicker CorrectionSelectabl
Image Stabilization (EIS)YesYes
Color (250 ms)0.0025 lux (Color)0.0125 lux
Mono (33 ms)0.013 lux (Mono)0.066 lux
Mono (250 ms)0.0016 lux (Mono)0.0085 lux
Note: Sensitivity in lux for 90% reflectance, f/1.6 (wide angle), 50 dB gain at 30 IRE (30% of signal level) with Sensitivity
Boost OFF; 4X improvement to sensitivity with Sensitivity Boost ON
Camera name, time, date, and customizable text with multiple supported languages. Embedding of custom images and
6:916:9
logos supported.
e Auto On/Off, 50 Hz or 60 Hz modes
TECHNICAL SPECIFICATIONS
SOFTWARE FEATURES
• 256 presets
• 32 tours
• ±0.05° preset accuracy
• 8 configurable scans
• Patterns–8 recordable patterns (up to 5 minutes each)
French, Russian, Turkish, Simplified Chinese, and Korean)
• Password protection
• 16 window blanks, configurable in size
• “Auto Flip” feature rotates dome 180° at bottom of tilt travel
• Configurable park with actions
• Proportional pan/tilt continually decreases pan/tilt speeds in proportion
to depth of zoom
o analytics including nine user-configurable behaviors
• Pelc
• Multiple DNN analytic behaviors
• Image Defog modes
PELCO ENHANCED ANALYTICS SUITE
Spectra Enhanced range cameras includes two Basic and eight
Enhanced user-configurable behaviors to enhance the flexibility and
performance of the camera. The camera is capable of running up to
two Enhanced behaviors in addition to the two Basic behaviors at the
same ti
me.
For each behavior, you can set up different scenarios for the behavior,
which will automatically detect and trigger alarms when specific
activity is detected.
Analytics are configured and enabled using a standard Web browser,
and behavior alarms are compatible with VideoXpert or a third-party
system that supports Pelco’s API.
Available Enhanced analytic behaviors include:
• Abandoned Object: Detects objects placed within a
triggers an alarm if the object remains in the zone unattended. An airport
terminal is a typical installation for this behavior. This behavior can also
detect objects left behind at an ATM, signaling possible card skimming.
• Adaptive Motion: Detects and tracks objects that enter a scene and
then triggers an alarm when the objects enter a user-defined zone. This
behavior is primaril
reduce the number of false alarms caused by environmental changes.
• AutoTracker: Detects and tracks movement in the field of view. When
the AutoTracker behavior is configured, the system automatically pans
and tilts to follow the moving object until the object stops or disappears
from the monitored area.
• Directional Motion: Generates an alarm in
person or object moves in a specified direction. Typical installations for
this behavior include an airport gate or tunnel where cameras can detect
objects moving in the opposite direction of the normal flow of traffic or an
individual entering through an exit door.
• Loitering Detection: Identifies when people or vehicles remain in a
defined zone too long. This behavior i
of suspicious behavior around ATMs, stairwells, and school grounds.
• Object Counting: Counts the number of objects that enter a defined
zone. This behavior can be used to count the number of people at a store
entrance/exit or inside a store where the traffic is light. This behavior is
based on tracking and does not count people in a crowded setting.
• Object Remo
user-defined zone. This behavior is ideal for customers who want to
detect the removal of high value objects, such as painting from a wall or a
statue from a pedestal.
• Stopped Vehicle: Detects vehicles stopped near a sensitive area longer
than the user-defined time allows. This behavior is idea for airport
curbside drop-offs, parking enforcemen
breakdowns, and vehicles waiting at gates.
y used in outdoor environments with light traffic to
s effective in real-time notification
val: Triggers an alarm if an object is removed from a
t, suspicious parking, traffic lane
defined zone and
a high traffic area when a
Available Basic analytic behaviors include:
• Camera Sabotage: Detects contrast changes in the field of view. An
alarm is triggered if the lens is obstructed by spray paint, a cloth, or a
lens cap. Any unauthorized repositioning of the camera also triggers an
alarm.
• Region-Based Simple Motion Detection: Based on sensitivity, the
camera determines if sufficient motion is detected within a configurable
region.
TECHNICAL SPECIFICATIONS
VIDEO
Video EncodingH.264 High, Main, or Base profiles,
H.265 Main profile,
and MJPEG
Video StreamsUp to 3 simultaneous streams; the second
In-Ceiling 0.75-inch conduit fitting
PendantThrough 1.5-inch NPT pendant mount
Unit Weight (1080p models) (4K models)
In-Ceiling, Indoor3.0 kg (6.6 lb)3.2 kg (7.05 lb)
In-Ceiling, Environmental 3.4 kg (7.5 lb)3.6 kg (7.94 lb)
Pendant, Environmental 3.9 kg (8.6 lb)4.1 kg (9.04 lb
Effective Projected Area (EPA)
Pendant Without mount and with sun shield, 47 square
inches
With IWM Series
square inches
mount with sun shield, 96.5
ALARM
UnsupervisedDetects open or closed alarm state
SupervisedDetects open and short alarm state with
Inputs (4)3.5 VDC maximum, 3.5 mA maximum
Relay Outputs (2)±32 VDC maximum, 150 mA maximum
external 1-kohm resistor
AUDIO
AudioBidirectional, full duplex
InputLine level; 3-kohm differential impedance,
OutputLine level; 600-ohm differential impedance,
Streaming
1Vp-p maximum signal level
1Vp-p
Embedded audio
MINIMUM SYSTEM REQUIREMENTS
Processor Intel® Core™ i3 Processor, 2.4 GHz
Operating System Windows
Memory 4 GB RAM
Network Interface Card 100 megabits (or greate
Web Browser Internet Explorer
®
or Mac® OS X 10.4 (or later)
(or later); Chrome 81 (or later); Internet
Explorer 8.0 (or later) is recommended for
configuring analytics
Lower Dome Nylon for 2 MP models, polycarbonate for 4K
Light Attenuation
Smoked f/0.5 light loss
Clearf/0.0 light loss
models
STORAGE
Local StorageSD card slot with support for SDXC cards
*
Supports mixed IPv4 and IPv6 installations, but not IPv6-only deployments.
†
Pelco Media Player is recommended for control, smoothness, and reduced
latency as compared to QuickTime.
Capture 1–5–10 second video clips on camera
sabotage, motion detection, or alarm input;
record video continuously in the case of
network outage with option to overwrite;
access video through FTP protocol and ONVIF
Profile G
TECHNICAL SPECIFICATIONS
OPERATING TEMPERATURE
In-Ceiling (Indoor):
Operating Temperature–10°C to 55°C (14°F to 131°F)
Cold Start–10° C
Environmental Units:
Sustained Operating
Temperature–51°C to 60°C (–59.8°F to 140°F)
Absolute Max Operating
Temperature65°C (4 hours per day)
Cold Start–40°C (–40°F)
Ice Free–20°C (–4°F)
De-Ice–20°C (–4°F)
Storage Temperature–20°C to 65°C (–4°F to 149°F)
Storage Humidity5 to 95% (non-condensing)
OPERATING HUMIDITY
In-Ceiling (Indoor)10 to 90% RH (noncondensing)
Environmental In-Ceiling,
Environmental Pendant10 to 100% RH
MECHANICAL
(Dome Drive Only)
Variable Speed 0.05° to 100°/sec (manual pan speed)
Preset Accuracy±0.05°
Pan Movement 360° continuous pan rotation
Vertical Tilt +1° to –90°
Maximum Pan SpeedUp to 700° per second
Maximum Tilt SpeedUp to 500° per second
Manual Pan/Tilt Speeds
Pan 0.05° to 100°/sec manual operation
Tilt0.05° to 50°/sec manual operation
Preset Speeds
Pan 700°/sec
Tilt 500°/sec
WIND SPECIFICATIONS
Full Motion Control0 to 130 knots (150 mph/241 kmh)
PELCO’S SMART COMPRESSION TECHNOLOGY
Pelco’s Smart Compression Technology lowers bandwidth and storage
requirements by up to 70%, while reducing storage requirements.
occurring within live video in real-time, to intell
information you don’t need, while retaining details with clear quality in the
areas that are important in the scene. By enabling Dynamic GOP, an added
feature of Smart Compression, the number of I-frames are automatically
reduced in scenes with low motion. Based on the complexity of scenes and
motion occurring, such as a store room that has limited entry and exit, up to
70% bandwidth savings can be achieved.
igently compress the
PELCO CAMERA LINK
Pelco Camera Link technology brings together the best of two
flagship Pelco products: You get the seamless and continual
situational awareness of Optera across a wide space along with the
ability to automatically zoom in for great detail with nearby Spectra
Enhanced and follow people and vehicles closely.
POWER REDUNDANCY
Spectra Enhanced 7 range cameras are designed with Power over
Ethernet (PoE), 24 VAC and 48 VDC to reduce costs
planning, wiring, and installation. PoE functionality works with PoEenabled network switches or power injectors, eliminating the need
for separate power supplies and cabling, and increasing camera fail
safety through an interruptible power supply (UPS).
The cameras also support power supply failover between PoE and 48
VDC/24VAC and allow a primary power source selection for the
power draw
. If the camera is running with both PoE and 48 VDC/24
VAC power sources, and then the primary power source is lost, the
camera will switch to an alternative source without any interruption
or video loss. Once primary power is restored, the camera seamlessly
switches back to the primary source.
and simplify
TECHNICAL SPECIFICATIONS
ELECTRICAL
Ports RJ-45 connector for 100Base-TX as well as
Cabling Type Cat5e or better
SFP/FSFP InterfaceSupports Pelco FSFP Series transceivers and
Input Voltage 20 to 32 VAC; 24 VAC nominal
Input Power
24 VAC 2 A (30 VA) maximum for indoor or
48 VDC 1 A (40 W) maximum for indoor or
PoE (802.3bt)0.7 A (32 W) maximum for indoor or
PoE (802.3at)0.5 A (25 W) maximum for indoor models only
1000Base-TX
Auto MDI/MDI-X
Autonegotiate/manual setting
third-party MSA complaint transceivers
42 to 53 VDC; 48 VDC nominal
environmental u
4.8 A (71 VA) maximum for environmental unit
with heater
environmental units without heater
1.9 A (80 W) maximum for environmental unit
with heater
environmental units without heater
1.3 A (70 w) maximum for environmental unit
with heater
and ambient temperatures above –10°C
nits without heater
CERTIFICATIONS/RATINGS/PATENTS
• CE (Class A)
• FCC (Class A)
• ICES-003 (Class A)
• UL /cUL Listed
• UL/IEC/EN 60950-1, 60950-22, 62368-1
• KC
• NOM
• RCM
• EAC*
• BIS
• Environmental models:
– Type 4X
– EN 50155 (EN 61373 Category 1, Class B)
– IEC/EN 60068-2-1 Cold
– IEC/EN 60068-2-2 Dry Heat
– IEC/EN 60068-2-6 Product Vibration
– IEC/EN 60068-2-14 Change of Temperature
– IEC/EN 60068-2-27 Product Shock
– IEC/EN 60068-2-30 Damp Heat
– IEC/EN 60068-2-78 Damp Heat (Steady-State)
– IEC/EN 62262 Impact (IK 10)
– IEC/EN 60529 (IP66, IP67)
• IEC 62676-5 Data specifications and image quality performance for
camera devices
• Meets NEMA TS2 para 2.2.7 - 2.2.9 (Environmental models)
• FDOT (Environmental models)*
• Cisco® Medianet Media Services Proxy 2.0 compatible
• ONVIF Profile S, Profile G, and Profile T Conformant
• U.S. Patents 5,931,432; 6,793,415 B2; 6,802,656 B2; 6,821,222 B2;
615 B2
7,161,
*At the time of this publication, certifications are pending. Consult the