Pelco RK5200PS-5U specification sheets

PRODUCT SPECIFICATION

RK5200PS-5U Rack Mount

CHASSIS FOR ENDURA® SYSTEM MODULES

video management solutions

Product Features

• Mounts in Standard 19-inch (48.26 cm) Rack

• Hot-Swappable Internal Power Supplies

• Thermal Management Included

• Optional Blank Modules

• Integrates with Pelco Endura

• 5 Rack Units (RU) High

The

RK5200PS-5U

power supplies, thermal management, and can contain up to
12 Endura
The internal power supply powers all modules and can be replaced
easily if it fails. The Pelco badge on the front of the power supply
illuminates blue when the power supply is running, and a status
LED provides notification of a power failure on either of the
redundant power supplies. The chassis is designed to mount into
an EIA-standard, 19-inch (48.26 cm) rack.

The internal power supply has a relay output connector that is
directly wired to the power and is a normally closed (N.C.) dry
contact. If the power supply fails, the relay opens and the LED
above the Pelco badge lights up.

®

chassis has redundant hot swappable internal

system modules. The chassis measures 5 RU in height.

®

Modules

Optional blank modules (RK5001B-4U) can be inserted into empty
module slots to create a clean, full-rack look as well as ensure proper
airflow if the rack contains fewer than 12 modules.

International Standards

Organization Registered Firm;

ISO 9001 Quality System

C4664 / NEW 4-26-10

TECHNICAL SPECIFICATIONS

MODEL

RK5200PS-5U Rack mount chassis for up to 12 Endura

modules; redundant internal power supply

GENERAL

Dimensions 15.50" D x 17.70" W x 8.72" H

Mounting Fits 19-inch (48.26 cm), EIA-standard rack
Unit Weight 12.7 lb (5.76 kg), with power supply

Shipping Weight 44.0 lb (19.93 kg)

(39.37 x 44.96 x 22.15 cm)

37.8 lb (17.15 kg), fully populated

ELECTRICAL

Input Voltage 100-240 VAC, 50-60 Hz, autoranging
Output Voltage 12 VDC
Power Consumption Operating Maximum*

100 VAC 75 W, 256 BTU/H
115 VAC 75 W, 256 BTU/H
220 VAC 70 W, 239 BTU/H

†

†

†

Fuse 4 A/250 V
Redundant Capability Yes, hot swappable

MECHANICAL

Number of Slots 12 for modules and 2 for power supply
Module Orientation Vertical
Rack Units
Construction Aluminum
Finish Black

‡

5 (includes thermal management)

CERTIFICATIONS

• CE, Class A

• FCC, Class A

• UL/cUL Listed

• C-Tick

• S Mark for Argentina

OPTIONAL ACCESSORIES

RK5001B-4U Single-width blank module
RK5200PS Replacement power supply module

ENVIRONMENTAL

Operating Temperature 41° to 95°F (5° to 35°C) at air intake

Storage Temperature –40° to 149°F (–40° to 65°C)
Operating Humidity 20% to 80% noncondensing
Maximum Humidity Gradient 10% per hour
Operating Altitude –50 ft to 10,000 ft (–16 m to 3,048 m)
Operating Vibration 0.25 G at 3 Hz to 200 Hz at a sweep rate of

Note:

The temperature at the unit air intake can be significantly higher than
room temperature. Temperature is affected by rack configuration, floor layout,
air conditioning strategy, and other issues. To prevent performance failure and
unit damage, make sure the temperature at the unit is continuously within the
operating temperature range. The RK5200 pulls air from the bottom of the
rack, across the modules, and then exhausts the heated air through the
upper-rear of the rack. A 1 RU spacer below the rack is required to ensure
adequate airflow.

*Operating maximum is noninclusive of components within the rack.

†

BTU/H is based on 20% internal inefficiency rating; 80% of power output is consumed by NET5400T1 units.

‡

Use a 1 RU spacer under the rack to ensure adequate airflow.

Pelco, Inc. Worldwide Headquarters:

3500 Pelco Way, Clovis, California 93612-5699 USA

USA & Canada
International
www.pelco.com

Tel: [phone] • FAX: [phone]

Tel: [phone] • FAX: [phone]

(front of unit)

0.5 octaves/minute

Pelco, the Pelco logo, Endura, and the Endura logo are registered trademarks of Pelco, Inc.

All product names and services identified throughout this document are trademarks or registered

trademarks of their respective companies. The absence of a trademark or registered trademark

from this document does not constitute a waiver of intellectual property rights.

Product specifications and availability subject to change without notice.

©Copyright 2010, Pelco, Inc. All rights reserved.