Pelco PT780-24P, PT780-24SL, PT780-VSSL Specsheet

PRODUCT SPECIFICATION

camera site

Legacy® Series Integrated Positioning System

MEDIUM DUTY, INDOOR/OUTDOOR, COAXITRON® COMPATIBLE

Product Features

• Indoor/Outdoor Operation

• RediLINK

• Delrin

• Optional Preset Positioning and 360° Pan Rotation

• Gold-Plated Pin Connectors Ensure Reliable Contact

• Prewired, Internal Feedthrough

• Easily Removed Clamshell Covers

• Bottom-opening Wall Mount Houses Integral Receiver

• Receiver Offers Adjustable Lens Voltages, Selectable Camera

Voltages NTSC or PAL Video, Transient Suppression Circuit Protection, and Auto/Random Scan as Standard Features

Quick-Connect Feature

Worm Gear Drives

LEGACY PT780 PAN/TILT

AND EH4718L ENCLOSURE

Series

The

Legacy

is an innovative system of “building block” components designed to simplify installation and system design. System components include an enclosure, pan/tilt, receiver, and wall mount.

The mechanical and electrical components of the feature RediLINK

quick-connectors making assembly fast and effort-

Legacy Series

less. It’s so easy, the basic system can be assembled in a matter of minutes.

Select the

Legacy

model pan/tilt and enclosure to create the basic system. Then, select an appropriate receiver and mount to complete the system package. Models are available with optional heater, defroster, blower, thermal insulation, and sun shroud.

The

Legacy Series

pan/tilt is capable of handling loads up to 52 pounds (23.6 kilograms) and features gold-plated electrical pin connectors to ensure reliable contact and smooth operation. The pan/ tilt also features a Delrin

worm gear that requires no lubrication, is corrosion-resistant, and ensures long life. Limit stops are internally adjustable. Available in ﬁxed or variable speed models, options for the pan/tilt include preset positioning, heater blanket, and 360-degree pan positioning. The pan/tilt is prewired for internal feedthrough for all enclosure and camera functions.

The

Legacy

enclosure features a rear-opening, front-hinged lid with gas strut, adjustable camera sled, tilt table, blower, and heater. Enclosure options include defroster, thermal insulation, and sun shroud.

The receivers in the

Legacy Series

have a simple three-wire power connection with on/off switch that supplies power to the entire system. Choose from ﬁxed or variable speed models, with or without presets, for 120/24/230 VAC applications. All models are compatible with Coaxitron

control systems and Pelco RS-422

control systems utilizing D or P type protocols.

The

Legacy

wall mount is constructed from aluminum and meets NEMA Type 4 standards. The mount opens from the bottom for easy access and installation of the

Legacy Series

receiver. The mount can also be used for pole, corner, and parapet applications when used with the appropriate adapter.

An optional infrared illuminator is available for nighttime viewing.

C342 / REVISED 1-05

U.S. Patents

IP66

D307,915, D340,940, and D5,224,675

International Standards

Organization Registered Firm;

ISO 9001 Quality System

TECHNICAL SPECIFICATIONS

Pan/Tilt

MECHANICAL

Pan Rotation Movement in horizontal plane:

0-355° 0-360° (SL models only)

Pan Speed

VS models only 1-17°/sec ±1° (maximum load condition) All others 9°/sec ±1°

Tilt Rotation 90° down from horizontal; 60° up from

horizontal

Tilt Speed

VS models only 1-4°/sec ±0.5° (maximum load condition) All others 3°/sec ±0.5°

Torque Output

VS models only 18.3 ft·lbs (24.8 N•m) at rated voltage and

75°F (23°C)

All others 23.8 ft·lbs (32.3 N•m) at rated voltage and

75°F (23°C)

Maximum Load

VS models only 40 lbs (18.14 kg) at speciﬁed torque All others 52 lbs (23.55 kg) at speciﬁed torque

Pan/Tilt Drive System Delrin® worm gear; ground and polished

stainless steel worm

Pan/Tilt Bearings Roller thrust bearings and bronze Oilite

bushings

Lubricants

Bearings NLGI #2; lithium complex grease fortiﬁed with

molybdenum

Chain Teﬂon chain lubricant, such as Tri-Flow

Braking Friction

ELECTRICAL

Input Voltage 120 VAC or 24 VAC, 50/60 Hz 12 VDC (VS models)

VA Required (At speciﬁed input voltage)

120 VAC 24 VAC 12 VDC

Pan 19.2 VA (0.16A) 21.6 VA (0.9A) 17.04 VA (1.42A) Tilt 32.4 VA (0.27A) 24 VA (1A) 12.48 VA (1.04A)

Total 51.6 VA (0.43A) 45.6 VA (1.9A) 29.52 VA (2.46A) Maximum Current 2 amps per conductor (SL models only) Connectors Amp CPC type, mate supplied (37 pins) Motor Type

VS models only 12 VDC continuous duty. DC permanent

magnet

All others Single phase, instantaneous reversing,

induction type. 120 VAC or 24 VAC, 50/60 Hz, impedance protected. 50% duty cycle; 30 minute rating

Limit Switches 5 amp, 250 VAC maximum; internal

adjustment Pan/Tilt Conductor Requirements

Standard model 20 unshielded, plus video & camera sync coax* Standard with /PP 27 unshielded, plus video & camera sync coax* Standard with /SL 14 unshielded, plus video & camera sync coax* Standard with SL/PP 20 unshielded, plus video & camera sync coax*

*Including safety ground

Note: Two additional conductors may be required with /HB option.

Cable Distances**

PT780P Series

20 AWG (0.5 mm

6 Conductors

7 Conductors***

) 1,370 ft (417 m) 2,745 ft (836 m) 18 AWG (1.0 mm2) 2,180 ft (664 m) 4,370 ft (1,331 m) 16 AWG (1.5 mm2) 3,470 ft (1,057 m) 6,940 ft (2,115 m)

PT780-24P Series

20 AWG (0.5 mm2) 59 ft (17.98 m) 118 ft (35.96 m) 18 AWG (1.0 mm2) 94 ft (28.65 m) 188 ft (57.30 m) 16 AWG (1.5 mm2) 149 ft (45.41 m) 298 ft (90.83 m)

PT780-VS Series

20 AWG (0.5 mm

5 Conductors

) 24 ft (7.3 m) 18 AWG (1.0 mm2) 38 ft (11.58 m) 16 AWG (1.5 mm2) 60 ft (18.28 m)

**Cable distances are based on:

• 26.4 volts AC output voltage from controller (24 VAC models) or 132 volts AC output voltage from controller (120 VAC models) or 12 VDC output voltage from controller (12 VDC models), and

• 10% cable loss with both motors (pan/tilt) running simultaneously.

***Using 2-wire motor common

GENERAL

Construction

Pan/Tilt Aluminum exterior; painted steel and

aluminum interior parts Worm Gear Delrin, premium performance acetal Worm Ground and polished stainless steel

Environment Indoor/outdoor Ambient Temperature -10°F to 140°F (-23°C to 60°C) Weight 21.5 lb (9.7 kg) approximate Shipping Weight 25 lb (11.3 kg) approximate

CERTIFICATIONS/RATINGS (Pan/Tilt Only)

• CE, Class B

• Meets NEMA Type 3R and IP54 standards

11.10

(28.19)

0.70 (1.78)

8.50 (21.59)

9.60 (24.38) Ø 4.00 (10.16)

Ø 3.50 (8.89)

1/4-20 D&T X 0.50 USABLE THREAD DEPTH EQUALLY SPACED

ON A 2.25 (5.71) BC

Note:

Presets are a function of the receiver. Each pan/tilt with preset option is capable of 32 presets (ﬁrst 8 are alarming) when used with a Coaxitron matrix control and compatible preset receiver.

NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;

ALL OTHERS ARE INCHES.

LEGACY PT780 SERIES PAN/TILT

+ 2 hidden pages