Page 1
PRODUCT SPECIFICATION
PT570P/PT570-24P Pan/Tilt
OUTDOOR, MEDIUM DUTY
Product Features
• Easily Serviced
• Inverted Operation
• External Limit Stops
• Outdoor Applications
• Adjustable Worm-Gear Final Drive
• 120 VAC or 24 VAC Operation
• Capable of Auto/Random Scan Operation when Used with
Appropriate Control
• Maximum Load 40 lb (18.14 kg)
camera solutions
The
PT570P
and the
PT570-24P
are medium duty outdoor pan/tilts
capable of handling loads up to 40 pounds (18.14 kg). Both units
feature rugged worm-gear final drives to minimize backlash and
prevent wind drift. The drives are fully adjustable for wear.
Control voltages are 120 VAC for the
PT570-24P
. Construction is of aluminum, and the units are
completely sealed for all-weather use. The
PT570P
and 24 VAC for the
PT570P
and
PT570-24P
are recommended for use with our EH4700 Series environmental
enclosures.
An optional factory installed heater is available to allow operation to
–50°F (–45°C).
5.87
(14.91)
2.93
(7.44)
10.87
(27.61)
Ø 0.312 (0.79) 4X
0.281 X 0.656 OBROUND 2X
(0.71 X 1.67)
Ø 0.281 (0.71)
7.00
(17.78)
9.87
(25.07)
11.25
(28.58)
Ø 0.390 X 0.80 (0.99 X 2.03)
SLOT 4X
EQ SP ON A Ø4.75 (12.06) B.C.
2.37
(6.02)
(12.70)
Ø6.00
(15.24)
5.00
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;
ALL OTHERS ARE INCHES.
International Standards
Organization Registered Firm;
ISO 9001 Quality System
C330 / REVISED 10-27-10
Page 2
TECHNICAL SPECIFICATIONS
MODELS
PT570P Medium duty pan/tilt, 120 VAC
PT570P/PP Medium duty pan/tilt with presets, 120 VAC
PT570-24P Medium duty pan/tilt, 24 VAC
PT570-24P/PP Medium duty pan/tilt with presets, 24 VAC
ELECTRICAL
Input Voltage
PT570P, PT570P/PP 120 VAC, 50/60 Hz
PT570-24P, PT570-24P/PP 24 VAC, 50/60 Hz
Pan/Tilt Power Requirements
PT570P, PT570P/PP
Running 0.18 A (21.6 VA)
Starting 0.27 A (32.4 VA)
PT570-24P, PT570-24P/PP
Running 0.9 A (21.6 VA)
Starting 1.35 A (32.4 VA)
Connectors AMP CPC type (mate supplied)
Motors Two-phase induction type, instantaneous
Limit Switches 5 A each (pan and tilt); external adjustment
Conductor Requirements 6 or 7, unshielded (functions: left, right, up,
Maximum Operating Distances*
PT570P and PT570P/PP
6 Conductors 20 AWG (0.5mm
7 Conductors
†
PT570-24P and PT570-24P/PP
6 Conductors 20 AWG (0.5mm2) 40 ft (12 m)
7 Conductors
†
*Distances are calculated with both motors (pan and tilt) running and
assuming a 10% voltage drop.
†
Using 2-wire motor common.
reversing
down, motor common, safety ground); no
additional conductors for auto scan when
used with solid-state control; PP option
requires 4 additional conductors; HB option
requires 2 additional conductors
Cable Size Maximum Distance
2
) 1,045 ft (319 m)
18 AWG (1.0mm2) 1,665 ft (507 m)
16 AWG (1.5mm2) 2,640 ft (805 m)
20 AWG (0.5mm2) 2,080 ft (634 m)
18 AWG (1.0mm2) 3,330 ft (1,015 m)
16 AWG (1.5mm2) 5,285 ft (1,611 m)
Cable Size Maximum Distance
18 AWG (1.0mm2) 65 ft (20 m)
16 AWG (1.5mm2) 110 ft (34 m)
20 AWG (0.5mm2) 85 ft (26 m)
18 AWG (1.0mm2) 135 ft (41 m)
16 AWG (1.5mm2) 220 ft (67 m)
MECHANICAL
Pan 0 to 355° movement in horizontal plane
Speed 6°/sec ±1°
Torque 10 ft-lb with specified voltage
Tilt ±90° movement in vertical plane
Speed 3°/sec ±0.5°
Torque 20 ft-lb with specified voltage
Maximum Load 40 lb (18.1418.14 kg) at 5 inches (12.7 cm)
from tilt table surface to center of gravity
Gearing Adjustable worm-gear final drive to prevent
drift and minimize backlash
Bearings
Pan Heavy-duty ball bearings
Tilt Oilite bronze bushing
Braking Mechanical friction-type
Duty Cycle 50% duty cycle; 30 minute rating
GENERAL
Construction Aluminum plate; all internal parts corrosion
protected
Finish Gray polyester powder coat
Environment Outdoor;
–10° to 120°F (–23° to 49°C)
Unit Weight 22 lb (9.9 kg)
Shipping Weight 25 lb (11.5 kg)
CERTIFICATIONS/RATINGS
• CE, Class B (PT570-24P, PT570-24P/PP)
• UL Listed
• Meets NEMA Type 3R standards
OPTIONAL ACCESSORY
HB/570 Blanket heater in cover, 75 W; allows
operation to –50°F (–45°C);
120 VAC, 50/60 Hz (factory installed option)
RECOMMENDED CONTROLS
Coaxitron® or Matrix Refer to individual specification sheets for
information
MPT24DT Desktop control for 24 VAC pan/tilt
MPTAZ Series Desktop pan/tilt and zoom lens control with
auto/random scan
RECOMMENDED ENCLOSURE
EH4700 Series Environmental enclosure
RECOMMENDED MOUNTS
PA2000 Adapter plate; required when using WM2000
PM2000, PM2010 Ceiling/pedestal mount; maximum load 125 lb
(56.7 kg)
ST1 Support strut; use with WM2000/PM2000/
PM2010
WM2000 Wall mount; maximum load 75 lb (34 kg)
Pelco, Inc. Worldwide Headquarters:
3500 Pelco Way, Clovis, California 93612-5699 USA
USA & Canada
International
www.pelco.com
Tel: (800) 289-9100 • FAX: (800) 289-9150
Tel: +1 (559) 292-1981 • FAX: +1 (559) 348-1120
Pelco, the Pelco logo, and other trademarks associated with Pelco products referred
to in this publication are trademarks of Pelco, Inc. or its affiliates. All other
product names and services are the property of their respective companies.
Product specifications and availability are subject to change without notice.
©Copyright 2010, Pelco, Inc. All rights reserved.
Loading...