Pelco PT280-24P Specsheet

PRODUCT SPECIFICATION

PT280-24P Pan/Tilt

INDOOR, LIGHT DUTY, FEEDTHROUGH

Product Features

• “Mini” Pan/Tilt

• 24 VAC Operation

• Indoor Applications

• Inverted Operation

• Prewired for Zoom Lens, Camera Power and Video

• High Speed Pan Movement (12°/sec ±1°)

• Capable of Auto/Random Scan Operation When Used with

Appropriate Control

• Maximum Load 15 lb (6.8 kg)

camera solutions

The

PT280-24P

is a “mini” light duty, indoor pan/tilt that is factory prewired for feedthrough of all control functions (pan/tilt, motorized zoom lens, 24 VAC camera power, and video). All connections are made at the input connector, eliminating the need for wiring harnesses made in the ﬁeld. This feature greatly reduces installation time, while increasing the reliability and serviceability of the system.

The

PT280-24P

will accept a maximum load of 15 pounds (6.8 kg) and is ideally suited for use with our EH3010/EH3014 and other small enclosures.

The unit is also capable of auto/random scan operation when used with our MPTAZ24DT control.

(0.71 X 6.35) OB SLOT

4.50

(11.43)

LENS

CONNECTOR

22" (55.88) LONG FEEDTHROUGH CABLE

NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;

ALL OTHERS ARE INCHES.

7.88

(20.02)

1/4-20 X 3/8" USABLE THD EQ SP ON 1.00 (2.54) B.C. 3X

Ø 0.28 X 2.50

Ø 3.00

(7.62)

3.50

(8.89)

7.00

(17.78)

8.00

(20.32)

International Standards

Organization Registered Firm;

ISO 9001 Quality System

C324 / REVISED 10-12-10

TECHNICAL SPECIFICATIONS

MODEL

PT280-24P Light duty mini pan/tilt, 24 VAC

ELECTRICAL

Input Voltage 24 VAC Power Requirements

(Running) Pan 0.31 A (7.5 VA)

(Starting) Pan 0.47 A (11.2 VA)

Connector AMP CPC type (mate supplied), installed onto

Video Connector BNC Camera Power Spade lugs Motors Two-phase induction type, instantaneous

Limit Switches 5 A each (pan/tilt); external adjustment Conductor Requirements As listed, plus coaxial cable:

Pan/Tilt 5 plus ground Lens 4 Camera AC 2

Maximum Operating Distances*

5 Conductors 20 AWG (0.5mm

6 Conductors

*Distances are calculated with both motors (pan and tilt) running and

assuming a 10% voltage drop.

†

Using 2-wire motor common.

Tilt 0.38 A (9.2 VA)

Tilt 0.56 A (13.5 VA)

a pigtail exiting from the base of the unit (all functions, camera power, lens, video, pan/tilt)

reversing

Cable Size Maximum Distance

18 AWG (1.0mm2) 180 ft (55 m) 16 AWG (1.5mm2) 290 ft (88 m)

†

20 AWG (0.5mm2) 210 ft (64 m) 18 AWG (1.0mm2) 330 ft (101 m) 16 AWG (1.5mm2) 530 ft (162 m)

) 110 ft (34 m)

CERTIFICATIONS/RATINGS

• CE, Class B

• UL Listed

• Meets NEMA Type 1 standards

RECOMMENDED CONTROLS

Coaxitron

or Matrix Refer to individual spec sheets for

information. MPT24DT Desktop control for 24 VAC pan/tilt. MPTAZ24DT Desktop pan/tilt and zoom lens control with

auto/random scan for 24 VAC pan/tilts.

RECOMMENDED ENCLOSURES

EH3010/EH3014 Small, indoor enclosure EH4010/EH4014 Small, indoor enclosure EH3508/EH3512 Small, indoor/outdoor enclosure

RECOMMENDED MOUNTS

PM105 Medium duty wall mount; maximum load

PM14 Light duty wall mount; maximum load

40 lb (18.14 kg)

20 lb (9.07 kg)

MECHANICAL

Pan 0 to 355° movement in horizontal plane

Speed 12°/sec ±1°

Tilt ±90° movement in vertical plane

Speed 3°/sec ±0.5°

Maximum Load 15 lb (6.8 kg) at 2" (5.08 cm) from tilt table

surface to center of gravity (upright or

inverted) Gearing Chain and sprocket ﬁnal drive Bearings

Pan Heavy duty ball bearings Tilt Oilite bronze bushing

Duty Cycle 50% duty cycle; 30 minute rating

GENERAL

Construction Aluminum plate, all internal parts corrosion

Finish Gray polyester powder coat Environment Indoor; 32° to 120°F (0° to 49°C) Unit Weight 9 lb (4 kg) Shipping Weight 11 lb (4.9 kg)

Pelco, Inc. Worldwide Headquarters:

3500 Pelco Way, Clovis, California 93612-5699 USA

USA & Canada International www.pelco.com

Tel: (800) 289-9100 • FAX: (800) 289-9150

Tel: +1 (559) 292-1981 • FAX: +1 (559) 348-1120

protected

Pelco, the Pelco logo, and other trademarks associated with Pelco products referred

to in this publication are trademarks of Pelco, Inc. or its afﬁliates. All other product names and services are the property of their respective companies. Product speciﬁcations and availability are subject to change without notice.