Pelco PT270-24P Specsheet
PRODUCT SPECIFICATION
PT270P Series Pan/Tilt
INDOOR, LIGHT DUTY
Product Features
• “Mini” Pan/Tilt
• Easily Serviced
• Inverted Operation
• Indoor Applications
• External Limit Adjustments
• High Speed Pan Movement (12°/sec ±1°)
• 24 VAC, 120 VAC, or 230 VAC Operation
• Capable of Auto/Random Scan Operation when Used with
Appropriate Control
• Maximum Load 15 Pounds (6.8 kg)
camera site
The
PT270 Series
of “mini” pan/tilts have been carefully engineered
to accommodate the lighter, smaller, new generation of CCTV
cameras. Small in size, but rugged in operation, the
PT270
measures
only 7.75 inches (19.69 cm) high, 8 inches (20.32 cm) wide, and
4.50 inches (11.43 cm) deep. Ideally suited for indoor operation, this
pan/tilt can be used in discreet enclosure applications or where
space is a consideration.
The
PT270
features aluminum and steel construction and has longlife 24 VAC, 120 VAC, or 230 VAC motors capable of auto/random
scan operation when used with the appropriate Pelco control.
The
PT270 Series
is capable of handling a maximum load of
15 pounds (6.8 kg), making it suitable for use with our EH3010 and
other small enclosures.
3.50
(8.89)
0.281 (0.71) X 2.50 (6.35)
SLOT
4.50
(11.43)
7.00
(17.78)
8.00
(20.32)
7.75
(19.69)
Ø3.00
(7.62)
DRILL & TAP 3 PLCS. TYP. 1/4-20 X 3/8”
ON A 1.00 (2.54) DIA. B.C. EQUALLY SPACED
C323 / REVISED 1-05
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;
ALL OTHERS ARE INCHES.
International Standards
Organization Registered Firm;
ISO 9001 Quality System
TECHNICAL SPECIFICATIONS
MODELS
PT270P Light duty mini pan/tilt, 120 VAC
PT270-24P Light duty mini pan/tilt, 24 VAC
PT270P/230 Light duty mini pan/tilt, 230 VAC
ELECTRICAL
Input Voltage
PT270P 120 VAC, 60 Hz
PT270-24P 24 VAC, 50/60 Hz
PT270P/230 230 VAC, 50 Hz
Power Requirements
(Running) Pan
PT270P 0.06A (7.2 VA) 0.07A (8.4 VA)
PT270-24P 0.31A (7.4 VA) 0.43A (10.3 VA)
PT270P/230 0.039A (8.9 VA) 0.038A (8.7 VA)
Connectors AMP CPC type (mate supplied)
Motors Two-phase induction type, instantaneous
reversing
Limit Switches 5A each (pan/tilt); external adjustment
Conductor Requirements 6 or 7, unshielded (functions: left, right, up,
down, motor common, safety ground). No
additional conductors for auto scan when
used with solid-state control
Maximum Operating Distances
CONTROL
24 VAC CONTROL
Cable Size
PT270-24P
6 Conductors
7* Conductors 20 AWG (0.5 mm
PT270P
6 Conductors
PT270P/230
6 Conductors
*Using 2 wire motor common
Notes:
20 AWG (0.5 mm
18 AWG (1.0 mm
16 AWG (1.5 mm2)
18 AWG (1.0 mm2)
16 AWG (1.5 mm
20 AWG (0.5 mm
18 AWG (1.0 mm
16 AWG (1.5 mm2)
20 AWG (0.5 mm
18 AWG (1.0 mm2)
16 AWG (1.5 mm
1. Distance (A) from control to pan/tilt is the same as distance from relay box to
pan/tilt.
2. Maximum operating distance can be extended by using a low voltage control
(24 VAC) and a relay box. Distance (B) from control to relay box is the same for
all applications.
3. Distances are calculated with both motors (pan and tilt) running and assuming
a 10% voltage drop in the cable.
A
RELAY BOX
BA
2
)
159 ft
2
)
254 ft
403 ft
2
)
274 ft
437 ft
2
)
694 ft
2
)
4,547 ft
2
)
7,234 ft
11,481 ft
2
)
14,714 ft
23,409 ft
2
)
37,151 ft
Tilt
PAN/TILT
PAN/TILT
Maximum Distance
AB
(48 m)
5,800 ft
8,250 ft
(1,767 m)
(2,515 m)
(3,962 m)
(77 m)
(123 m)
(84 m)
(133 m)
(212 m)
(1,386 m)
(2,205 m)
(3,499 m)
(4,484 m)
(7,135 m)
(11,323 m)
13,000 ft
MECHANICAL
Pan 0-355° movement in horizontal plane
Speed 12°/sec ±1°
Tilt ±90° movement in vertical plane
Speed 3°/sec ±0.5°
Maximum Load 15 lb (6.8 kg) at 2" (5.08 cm) from tilt table
surface to center of gravity
Gearing Chain and sprocket final drive
Bearings Pan – Heavy duty ball bearings
Tilt – Oilite bronze bushing
Braking Friction type
Duty Cycle 50% duty cycle; 30 minute rating
GENERAL
Construction Aluminum and steel; all internal parts
corrosion protected
Finish Gray polyester powder coat
Environment Indoor; 32° to 120°F (0° to 49°C)
Unit Weight 9 lb (4 kg)
Shipping Weight 10 lb (4.5 kg)
CERTIFICATIONS/RATINGS
• CE, Class B (PT270-24P, PT270P/230)
• UL Listed (PT270P, PT270-24P)
• Meets NEMA Type 1 standards
RECOMMENDED CONTROLS
Coaxitron or Matrix See individual specification sheets for
information.
MPT24DT Desktop control for 24 VAC pan/tilt.
MPTAZ Series Desktop pan/tilt and zoom lens control with
auto/random scan for 120/24/230 VAC pan/
tilts.
RB115, RB24 Relay box for extended low voltage operation.
Extends operating distance (control to relay
box). For use with 120/24 VAC pan/tilts and
24 VAC output controls.
RECOMMENDED ENCLOSURE
EH3010/EH3014 Small, indoor enclosure
EH4010/EH4014 Small, indoor enclosure
EH3508/EH3512 Small, indoor/outdoor enclosure
RECOMMENDED MOUNTS
PM14 Light duty wall mount; maximum load 20 lb
(9.07 kg)
PM105 Medium duty wall mount; maximum load 40 lb
(18.14 kg)
Pelco Worldwide Headquarters:
3500 Pelco Way, Clovis, California 93612-5699 USA
USA & Canada
International
www.pelco.com
Tel: (800) 289-9100 • FAX (800) 289-9150
Tel: (559) 292-1981 • FAX (559) 348-1120
Pelco and the Pelco logo are registered trademarks of Pelco.
Specifications subject to change without notice.
©Copyright 2005, Pelco. All rights reserved.
Loading...