Pelco PT1280SL Specsheet

PRODUCT SPECIFICATION
PT1280P/PT1280SL Pan/Tilt
OUTDOOR, HEAVY DUTY, FEEDTHROUGH
120 VAC Operation
Heavy Duty Adjustable Worm-Gear Final Drive
Prewired for Zoom Lens, Camera and Enclosure Power, and Video
360° Pan Rotation Model Available
Capable for Auto/Random Scan Operation
Indoor/Outdoor Applications
Maximum Load 100 Pounds (45.4 kg)
camera site
The PT1280P/PT1280SL are heavy duty, indoor/outdoor pan/tilts capable of handling loads up to 100 pounds (45.4 kg). They feature rugged high torque AC motors with adjustable worm-gear final drives to ensure long operational life, as well as drift-free operation.
The PT1280P Series are capable of auto/random scan operation when used with a Pelco solid-state auto/random scan control. No additional conductors, micro switches, or relays are required for auto scan operation.
These pan/tilts are factory prewired for feedthrough of all control functions — pan/tilt, motorized zoom lens, 24 VAC camera power, enclosure accessories, and video. All connections are made at the input connector, eliminating the need for wiring harnesses in the field. This feature greatly reduces installation time, while increasing the reliability and serviceability of the system.
The PT1280SL includes a slip ring option that allows 360-degree pan rotation.
These units can be mounted on Pelco’s universal wall/pedestal mounts: the PM2000/PM2010 for pedestal mounting and the WM2000 with PA2010 adapter plate and ST1 support strut or WM3026 for wall mounting. The EH5700 Series large environmental enclosure is also compatible for use with this pan/tilt series.
6.25
(15.88)
2.50
(6.35)
7.00
(17.78)
14.06
(35.71)
13.13
(33.35)
Ø3.75 (0.95) 4X
0.656 X 0.281 OB 2X (1.67 X 0.71)
Ø 0.281 (0.71) 0.5X
2.37 (18.42)
(6.02)
15.37
(39.04)
41” (104.14) LONG FEED­THROUGH CABLES
Ø 0.375 (0.95) EQ SP ON Ø7.00 (17.78) B.C. 4X
0.375 (0.95) [4X] EQ SP ON Ø7.25 (18.41) B.C. 4X
7.25
11.00
(27.94)
TO CL TILT
Ø8.50
(21.59)
C379 / REVISED 10-02
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;
ALL OTHERS ARE INCHES.
International Standards
Organization Registered Firm;
ISO 9001 Quality System
TECHNICAL SPECIFICATIONS
MODELS
PT1280P Heavy duty pan/tilt, 120 VAC PT1280P/PP Same as PT1280P except has presets.
Requires preset control.
PT1280SL Heavy duty pan/tilt with SL option (360° pan
rotation)
PT1280SL/PP Same as PT1280SL except has presets.
Requires preset control.
OPTIONS
FGP/1250P High speed gearing for pan, 12°/sec
ELECTRICAL
Input Voltage 120 VAC, 60 Hz Power Requirements
(Running) Pan 0.48A (57.5 VA)
(Starting) Pan 0.60A (72.5 VA)
Maximum Current 2A per conductor (SL model only) Connectors AMP CPC type (mate supplied) Motors Two-phase induction type, instantaneous
Limit Switches 5A each (pan and tilt); external adjustment Conductor Requirements 6 or 7, unshielded. (functions: left, right, up,
Maximum Operating Distances
PT1280P
6 Conductors
7* Conductors 20 AWG (0.5 mm
*Using 2 wire motor common
Notes: 1. Distance (A) from control to pan/tilt is the same as distance from relay box to
Tilt 0.48A (57.5 VA)
Tilt 0.60A (72.5 VA)
reversing
down, motor common, safety ground). No additional conductors for auto scan when used with solid-state control. PP option requires additional 4 conductors
CONTROL
24 VAC CONTROL
Cable Size
20 AWG (0.5 mm 18 AWG (1.0 mm 16 AWG (1.5 mm
18 AWG (1.0 mm 16 AWG (1.5 mm
pan/tilt.
2. Maximum operating distance can be extended by using a low voltage control (24 VAC) and a relay box. Distance (B) from control to relay box is the same for all applications.
3. Distances are calculated with both motors (pan and tilt) running and assuming a 10% voltage drop in the cable.
A
RELAY BOX
BA
2
)
2
)
2
)
1,235 ft
2
)
2
)
1,556 ft
2
)
2,470 ft
PAN/TILT
PAN/TILT
Maximum Distance
AB
489 ft
(149 m)
5,800 ft
778 ft
978 ft
(237 m) (376 m)
(298 m) (474 m) (752 m)
13,000 ft
8,250 ft
(1,767 m) (2,515 m) (3,962 m)
MECHANICAL
Pan Movement in horizontal plane:
0-355° (PT1280P); 360° (PT1280SL) Speed 6°/sec ±1° Torque 50 ft-lb with specified voltage
Tilt ±90° movement in vertical plane
Speed 3°/sec ±0.5° Torque 100 ft-lb with specified voltage
Maximum Load 100 lb (45.4 kg) at 5" (12.7 cm) from tilt table
surface to center of gravity
Gearing Adjustable worm-gear final drive Bearings
Pan Heavy duty ball bearings Tilt Oilite bronze bushing
Duty Cycle 50% duty cycle; 30 minute rating
GENERAL
Construction Aluminum casting and plate; all internal parts
corrosion protected
Finish Gray polyester powder coat Environment Indoor/outdoor;
-10° to 120°F (-23° to 49°C) Unit Weight 55 lb (24.9 kg) Shipping Weight 60 lb (27.2 kg)
CERTIFICATIONS/RATINGS
• UL Listed
• Meets NEMA Type 3R standards
RECOMMENDED CONTROLS
Coaxitron or Matrix See individual specification sheets for
information. Preset pan/tilt must be used with Coaxitron or matrix control with PP capability
and preset receiver. MPTAZ Series Desktop control (PTZ) with auto/random scan. RB115 Relay box for 120 VAC pan/tilts. Extends
operating distance (control to relay box). Use
only with MPT24DT or MPTAZ24DT low
voltage control.
RECOMMENDED ENCLOSURES
EH5700 Series Environmental enclosure, large
RECOMMENDED MOUNTS
PA2010 Adapter plate; required when using WM2000 PM2000, PM2010 Ceiling/pedestal mount; maximum load 125 lb
(56.7 kg) ST1 Support strut for WM2000/PM2000/PM2010 WM2000 Wall mount; use with PA2010 adapter and
ST1 support strut WM3026 Wall mount with adjustable head
Pelco Worldwide Headquarters:
3500 Pelco Way, Clovis, California 93612-5699 USA
USA & Canada Tel: (800) 289-9100 • FAX (800) 289-9150 International Tel: (559) 292-1981 • FAX (559) 348-1120 www.pelco.com
ACCESSORIES
LL27 Series Low light infrared illuminator.
Pelco and the Pelco logo are registered trademarks of Pelco.
Specifications subject to change without notice.
©Copyright 2002, Pelco. All rights reserved.
Loading...