Pelco PT1260EX Specsheet

PRODUCT SPECIFICATION

camera solutions

PT1260EX Pan/Tilt

EXPLOSIONPROOF

Product Features

• Meets NEMA Type 4X Standards

• 120 or 230 VAC Operation

• Rugged Construction

• For Use in a Variety of Harsh and Hazardous Environments

• Heavy Duty Adjustable Worm-Gear Final Drive

• Optional Preset Positioning Capability

• Limit Stops Internally Adjustable

• Indoor/Outdoor Applications

• Maximum Load 100 Pounds (45.4 kg)

The

PT1260EX

requirements of explosionproof and dust-ignition-proof electrical equipment installed in Class I (Group C and D) and Class II, (Group E, F, and G) hazardous locations.

Easily capable of handling loads up to 100 pounds (45.4 kg), the

PT1260EX

explosion-proof enclosure for potentially hazardous or combustible applications.

The

PT1260EX

worm-gear ﬁnal drives to ensure long operational life, as well as drift-free operation.

pan/tilt has been engineered to meet the rigorous

is ideally suited for use with our EHX*E Series

features rugged, high torque AC motors and adjustable

6.25

(15.88)

2.50

(6.35)

7.00

(17.78)

14.06

(35.71)

14.50

(36.83)

Ø3.75 (0.95) 4X

0.656 X 0.281 OB 2X (1.67 X 0.71)

Ø 0.281 (0.71) 5X

2.37

(6.02)

7.25

(18.42)

The

PT1260EX

is manufactured from anodized plate aluminum. All internal and external parts are constructed of corrosion-protected steel or aluminum, and the fasteners are stainless steel. Pan and tilt limit stops are internally adjustable.

16.50

(41.91)

11.00

(27.94)

TO CL TILT

9.00

(22.86)

0.375 (0.95) 4X EQ SP ON 7.00 (17.78) B.C.

0.375 (0.95) 4X EQ SP ON 7.25 (18.42) B.C.

NOTE: VALUES IN PARENTHESES ARE CENTIMETERS; ALL OTHERS ARE INCHES.

International Standards

Organization Registered Firm;

ISO 9001 Quality System

C368 / REVISED 3-29-11

TECHNICAL SPECIFICATIONS

MODELS

PT1260EX Explosionproof/weatherproof pan/tilt,

PT1260EX/220 Same as PT1260EX except 230 VAC operation PT1260EX/PP Same as PT1260EX except has preset option;

PT1260EX/PP/230 Same as PT1260EX/PP except 230 VAC

120 VAC

requires preset control

operation

ELECTRICAL

Input Voltage

PT1260EX, PT1260EX/PP 120 VAC, 50/60 Hz PT1260EX/220, PT1260EX/PP/230 230 VAC, 50/60 Hz

Power Requirements

PT1260EX, PT1260EX/PP Pan Tilt

Running 0.48 A (57.5 VA) 0.48 A (57.5 VA)

Starting 0.60 A (72.5 VA) 0.60 A (72.5 VA) PT1260EX/220, PT1260EX/PP/230 Pan Tilt

Running 0.19 A (43.7 VA) 0.27 A (62.1 VA)

Starting 0.19 A (43.7 VA) 0.27 A (62.1 VA)

Connectors Explosionproof gland (supplied) Motors Two-phase induction type, instantaneous

Limit Switches 5 A each (pan and tilt); internal adjustment Conductor Requirements 6, unshielded (functions: left, right, up, down,

Maximum Operating Distances*

PT1260EX and PT1260EX/PP

6 Conductors Cable Size Maximum Distance

PT1260EX/220 and PT1260EX/PP/230

6 Conductors 20 AWG (0.5mm2) 2,463 ft (750 m)

*Distances are calculated with both motors (pan and tilt) running and

assuming a 10% voltage drop.

reversing

motor common, safety ground); PP option requires 4 additional conductors

20 AWG (0.5mm 18 AWG (1.0mm2) 778 ft (237 m) 16 AWG (1.5mm2) 1,235 ft (376 m)

18 AWG (1.0mm2) 3,918 ft (1,194 m) 16 AWG (1.5mm2) 6,218 ft (1,895 m)

) 489 ft (149 m)

MECHANICAL

Pan 0° to 355° movement in horizontal plane

Speed 6°/sec ±1° Torque 50 ft-lb with speciﬁed voltage

Tilt ±90° movement in vertical plane

Speed 3°/sec ±0.5° Torque 100 ft-lb with speciﬁed voltage

Maximum Load 100 lb (45.4 kg) at 5" (12.7 cm) from tilt table

surface to center of gravity

Gearing Adjustable worm-gear ﬁnal drive to prevent

drift and minimize backlash

Bearings

Pan Sealed, heavy-duty ball bearings

Tilt Oilite bronze bushing Braking Mechanical Duty Cycle 50% duty cycle; 30 minute rating

GENERAL

Construction Anodized, aluminum plate; all internal and

external parts corrosion protected; stainless

steel fasteners Tilt Shaft Type 316 stainless steel Finish Gray polyester powder coat Environment Indoor/outdoor operation Temperature –10° to 120°F (–23° to 49°C) Unit Weight 69 lb (31.2 kg) Shipping Weight 75 lb (34 kg)

CERTIFICATIONS/RATINGS

• UL Listed (PT1260EX and PT1260EX/PP)

• For use in Class I (Groups C and D) and Class II (Groups E, F, and G)

hazardous locations (PT1260EX and PT1260 EX/PP)

• Meets NEMA Type 4X standards

RECOMMENDED CONTROLS

Coaxitron® or Matrix See individual speciﬁcation sheets for

information. Preset pan/tilt must be used with

Coaxitron or matrix control with PP capability

and preset receiver. MPTAZ Series Desktop pan/tilt and zoom lens control with

auto/random scan for 120/230/24 VAC

pan/tilts.

Pelco by Schneider Electric

3500 Pelco Way, Clovis, California 93612-5699 United States

USA & Canada International www.pelco.com

Tel (800) 289-9100 Fax (800) 289-9150

Tel +1 (559) 292-1981 Fax +1 (559) 348-1120

RECOMMENDED ENCLOSURES

EHX*E Series Explosionproof enclosure

Pelco, the Pelco logo, and other trademarks associated with Pelco products referred

to in this publication are trademarks of Pelco, Inc. or its afﬁliates. All other product names and services are the property of their respective companies. Product speciﬁcations and availability are subject to change without notice.