Pelco PT1250P Specsheet

PRODUCT SPECIFICATION

PT1250P Pan/Tilt

OUTDOOR, HEAVY DUTY

Product Features

• 120 VAC Operation

• Optional Preset Positioning Capability

• Heavy Duty, Adjustable Worm-Gear Final Drive

• External Pan and Tilt Limit Adjustment

• Capable of Auto/Random Scan Operation

• Rugged Aluminum Construction

• Indoor/Outdoor Applications

• Maximum Load 100 lb (45.4 kg)

camera solutions

The

PT1250P

is a heavy duty pan/tilt easily capable of handling loads up to 100 pounds (45.4 kg). Equipped with high torque AC motors with adjustable worm-gear ﬁnal drives, this pan/tilt ensures long operational life as well as drift-free operation.

The

PT1250P

is capable of auto/random scan operation when used with our solid-state auto/random scan joystick control. No additional conductors, micro switches, or relays are required for auto/random scan operation.

The

PT1250P

is manufactured from cast and plate aluminum with all internal parts corrosion-protected steel or aluminum. Limit stops are externally adjustable for ease of installation.

The

PT1250P

is recommended for use with our EH5700 Series

environmental enclosures.

6.25

(15.88)

11.00

(27.94)

TO TILT

2.50

(6.35)

7.00

(17.78)

14.06

(35.71)

Ø8.50

(21.59)

Ø3.75 (0.95) 4X

0.656 X 0.281 OB 2X (1.67 X 0.71)

Ø 0.281 (0.71) 5X

2.37 (18.42)

(6.02)

15.37

(39.04)

0.375 (0.95) 4X EQ SP ON 7.00 (17.78) B.C.

0.375 (0.95) 4X EQ SP ON 7.25 (18.42) B.C.

7.25

NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;

ALL OTHERS ARE INCHES.

International Standards

Organization Registered Firm;

ISO 9001 Quality System

C370 / REVISED 10-27-10

TECHNICAL SPECIFICATIONS

MODELS

PT1250P Heavy duty pan/tilt, 120 VAC PT1250P/PP Same as PT1250P except has preset

positioning option. Requires preset control

ELECTRICAL

Input Voltage 120 VAC, 50/60Hz Pan/Tilt Power Requirements

Running 0.48 A (57.5 VA)

Starting 0.60 A (72.5 VA) Connectors AMP CPC type (mate supplied) Motors Two-phase induction type, instantaneous

Limit Switches 5 A each (pan and tilt); external adjustment Conductor Requirements 6 or 7, unshielded (functions: left, right, up,

Maximum Operating Distances*

6 Conductors 20 AWG (0.5mm

7 Conductors

†

*Distances are calculated with both motors (pan and tilt) running and

assuming a 10% voltage drop.

†

Using 2-wire motor common.

reversing

down, motor common, safety ground). No additional conductors for auto scan when used with solid-state control. PP option requires additional 4 conductors

Cable Size Maximum Distance

) 489 ft (149 m) 18 AWG (1.0mm2) 778 ft (237 m) 16 AWG (1.5mm2) 1,235 ft (376 m)

20 AWG (0.5mm2) 978 ft (298 m) 18 AWG (1.0mm2) 1,556 ft (474 m) 16 AWG (1.5mm2) 2,470 ft (752 m)

MECHANICAL

Pan 0 to 355° movement in horizontal plane

Speed 6°/sec ±1° Torque 50 ft-lb with speciﬁed voltage

Tilt ±90° movement in vertical plane

Speed 3°/sec ±0.5°

Maximum Load 100 lb (45.4 kg) at 5 inches (12.7 cm) from tilt

table surface to center of gravity Gearing Adjustable worm-gear ﬁnal drive Bearings

Pan Heavy-duty ball bearings

Tilt Oilite bronze bushing Braking Mechanical Duty cycle 50% duty cycle; 30 minute rating

GENERAL

Construction Aluminum casting and plate; all internal parts

Finish Gray polyester powder coat Environment Indoor/outdoor;

Unit Weight 54 lb (24.5 kg) Shipping Weight 59 lb (26.7 kg)

corrosion protected

–10° to 120°F (–23° to 49°C)

CERTIFICATIONS/RATINGS

• UL Listed

• Meets NEMA Type 3R standards

RECOMMENDED CONTROLS

Coaxitron

MPTAZ Series Desktop control (PTZ) with auto/random scan

or Matrix Refer to individual speciﬁcation sheets for

information. Preset pan/tilt must be used with Coaxitron or Matrix control with PP capability and preset receiver.

for 120/24 VAC pan/tilts.

Pelco, Inc. Worldwide Headquarters:

3500 Pelco Way, Clovis, California 93612-5699 USA

USA & Canada International www.pelco.com

Tel: (800) 289-9100 • FAX: (800) 289-9150

Tel: +1 (559) 292-1981 • FAX: +1 (559) 348-1120

RECOMMENDED ENCLOSURES

EH5700 Series Environmental enclosure, large.

RECOMMENDED MOUNTS

PA2010 Adapter plate; required when using WM2000 PM2000, PM2010 Ceiling/pedestal mount; maximum load 125 lb

(56.7 kg)

ST1 Support strut for WM2000/PM2000/PM2010;

increases maximum load

WM2000 Wall mount; use with PA2010 adapter and

ST1 support strut

WM3026 Wall mount with adjustable head; maximum

load 300 lb (136 kg)

ACCESSORIES

LL27 Series Low light infrared illuminator with

Pelco, the Pelco logo, and other trademarks associated with Pelco products referred

to in this publication are trademarks of Pelco, Inc. or its afﬁliates. All other product names and services are the property of their respective companies. Product speciﬁcations and availability are subject to change without notice.

500 W lamp