Pelco PT1250DCPP Specsheet

PRODUCT SPECIFICATION

Ø8.50

(21.59)

NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;

ALL OTHERS ARE INCHES.

11.00

(27.94)

TO TILTC

15.37

(39.04)

2.50

(6.35)

7.25

(18.42)

7.00

(17.78)

Ø 0.281 (0.71) 5X

6.25

(15.88)

Ø3.75 (0.95) 4X

14.06

(35.71)

0.656 X 0.281 OB 2X (1.67 X 0.71)

2.37

(6.02)

0.375 (0.95) 4X EQ SP ON 7.00 (17.78) B.C.

0.375 (0.95) 4X EQ SP ON 7.25 (18.42) B.C.

PT1250DC Pan/Tilt

OUTDOOR, HEAVY DUTY

Product Features

• 115 VDC Operation

• Optional Preset Positioning Capability

• Heavy Duty Adjustable Worm-Gear Final Drive

• Capable of Auto Scan and Variable Speed Operation when Used with

Appropriate Control

• Outdoor Applications

• Rugged Aluminum Construction

• Maximum Load 100 Pounds (45.4 kg)

camera site

The PT1250DC is a heavy duty pan/tilt, ruggedly constructed to comfortably operate with loads up to 100 pounds (45.4 kg). High torque D.C. motors with heavy duty adjustable worm-gear ﬁnal drive assemblies eliminate backlash and drifting. Equally important to the operator is dynamic braking for instantaneous stopping.

The PT1250DC is capable of auto scan and variable speed operation with the addition of the appropriate Pelco solid-state control modules. No additional conductors are required for either optional control module.

Extremely serviceable, the PT1250DC features easy access to all electrical and mechanical components.

The PT1250DC is manufactured from cast and plate aluminum with all internal parts corrosion-protected steel or aluminum. Limit stops are externally adjustable for ease of installation.

C373 / REVISED 1-05

International Standards

Organization Registered Firm;

ISO 9001 Quality System

TECHNICAL SPECIFICATIONS

MODELS

PT1250DC Heavy duty pan/tilt, 115 VDC PT1250DC/PP Same as PT1250DC except has position

feedback modiﬁcation. Requires preset control

MECHANICAL

Pan 0-355° movement in horizontal plane

Speed 6°/sec ±1°

Tilt ±90° movement in vertical plane

Speed 3°/sec ±0.5°

Maximum Load 100 lb (45.4 kg) at 5" (12.7 cm) from tilt table

Gearing Adjustable worm-gear ﬁnal drive Bearings

Pan Heavy duty ball bearings Tilt Oilite bronze bushing

Braking Dynamic for instantaneous stopping

surface to center of gravity

ELECTRICAL

Input Voltage 115 VDC Power Requirements

(Running) Pan 0.30A (34 VA)

(Starting) Pan 0.44A (51 VA)

Connectors Amp CPC type (mate supplied) Motors 115 VDC permanent magnet Limit Switches 5A each (pan and tilt); external adjustment Conductor Requirements 6, unshielded (functions: left, right, up, down,

Cable Distances 6 Conductors

Tilt 0.30A (34 VA)

Tilt 0.44A (51 VA)

motor common, safety ground). (No additional conductors for auto scan or variable speed. PP option requires additional 4 conductors.)

20 AWG (0.5 mm 18 AWG (1.0 mm

16 AWG (1.5 mm Distances are calculated with both motors (pan and tilt) running and assuming a 10% voltage drop in the cable.

) 635 feet (193 m)

) 1,015 feet (309 m)

) 1,610 feet (490 m)

GENERAL

Construction Aluminum casting and plate Finish Gray polyester powder coat Environment Outdoor operation;

-10° to 120°F (-23° to 49°C) Unit Weight 55 lb (25 kg) Shipping Weight 59 lb (26.7 kg)

RECOMMENDED CONTROLS

MPTV1510DT Desktop control with variable speed operation

for 115 VDC pan/tilts. Not compatible with PT1250DC/PP model.

RECOMMENDED ENCLOSURES

EH5700 Series Environmental enclosure, large

RECOMMENDED MOUNTS

PA2010 Adapter plate; required when using WM2000. PM2000, PM2010 Ceiling/pedestal mount; maximum load 125 lb

(56.7 kg). ST1 Support strut for WM2000/PM2000/PM2010. WM2000 Wall mount; maximum load 75 lb (34 kg).

When used with ST1 support strut, maximum

load is increased to 150 lb (68 kg). Must be

used with PA2010 adapter and ST1 strut. WM3026 Wall mount with adjustable head; maximum

load 300 lb (136 kg).

Pelco Worldwide Headquarters:

3500 Pelco Way, Clovis, California 93612-5699 USA

USA & Canada Tel: (800) 289-9100 • FAX (800) 289-9150 International Tel: (559) 292-1981 • FAX (559) 348-1120 www.pelco.com

Pelco and the Pelco logo are registered trademarks of Pelco.

Speciﬁcations subject to change without notice.