Pelco PP400 Specsheet

PRODUCT SPECIFICATION

PP400 Mount

PARAPET MOUNT, SPECTRA® AND LEGACY® ADAPTER

camera solutions

Product Features

• Low Cost

• Rugged Construction

• Supports up to 75 Pounds (34 kg)

• Parapet Mount Adapter for Spectra® and Legacy® Wall Mounts

• Design Includes Mounting Studs for Quick, Simple, Installation of

Wall Mount

• Mounts to Inside of Parapet; Minimum Parapet Height 18 Inches

(45.72 cm)

The

PP400

is a parapet adapter designed for use with Spectra

and Legacy® wall mounts. For Spectra, DF5, or DF8 Series pendant domes, use the IWM Series or IM4018 wall mounts. For Legacy integrated positioning systems, use the LWM41 wall mount.

The wall mounts are secured to the

PP400

by four 5/16-inch

mounting studs; nuts and split lock washers are supplied.

Constructed from aluminum, the

PP400

is capable of supporting up to 75 pounds (34 kg) and features a cable feedthrough hole for easy routing of video and power cables.

The

PP400

mounts to the inside of the parapet; a minimum 18-inch

parapet height is required.

Ø.37 (.93)

THRU 16X

8.00

(20.32)

7.50

(19.05)

Ø.312 (.797) THRU

FOR PEM STUD 4X

7.25

(18.41)

C272 / REVISED 10-03

6.00

(15.24)

.50

(1.27)

TYP

(13.97)

3.31

(8.40)

TYP.

5.50

26.00

20.25

(51.43)

15.00

(38.10)

NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;

ALL OTHERS ARE INCHES.

(66.04)

International Standards

Organization Registered Firm;

ISO 9001 Quality System

4.42

(11.22)

TECHNICAL SPECIFICATIONS

MODEL

PP400 Parapet mount adapter for IWM Series,

RELATED PRODUCTS

IWM Series Wall mount with cable feedthrough hole for

IDM4018 Wall mount with cable feedthrough hole and

LWM41 Wall mount for Legacy® integrated

EA4348 EWM adapter plate. Allows an EWM wall

MECHANICAL

Adapter Mounting Four 5/16-inch mounting studs (nuts and split

Mounting Method Secure to parapet with sixteen fasteners

IDM4018, and LWM41 wall mounts

, DF5, and DF8 Series pendant

Spectra domes

removable front end cap for Spectra, DF5, and DF8 Series pendant domes

positioning systems

mount to be installed on a PP400 for use with an Esprit® Series integrated positioning system

lock washers supplied) for attaching LWM41, IDM4018, EA4348, or IWM Series wall mount

suitable for mounting surface (minimum 1/4-inch diameter recommended, not supplied)

GENERAL

Construction 5052H32 aluminum, 0.190-inch (4.8 mm) thick Finish Gray polyester powder coat Maximum Load 75 lb (34 kg) Unit Weight 12.15 lb (5.51 kg) Shipping Weight 15 lb (6.79 kg)

Pelco, Inc. Worldwide Headquarters:

3500 Pelco Way, Clovis, California 93612-5699 USA

USA & Canada International www.pelco.com

Tel: (800) 289-9100 • FAX: (800) 289-9150

Tel: +1 (559) 292-1981 • FAX: +1 (559) 348-1120

Pelco, the Pelco logo, Esprit, Legacy, and Spectra are registered trademarks of Pelco, Inc.

Product speciﬁcations and availability subject to change without notice.