PRODUCT SPECIFICATION
POE90U1BT Series Adapter
90 WATT POWER OVER ETHERNET SINGLE PORT INJECTOR
Product Features
• Three Models Available:
– POE90U1BT, POE90U1BT-EUK, and POE90U1BT-US
• 90 Watts of High PoE Power
• IEEE802.3BT Compliant
• Diagnostic LEDs
• Broken Wire Detection
• Proprietary Detection, Disconn
• Full Protection
–
Overcurrent Protection (OCP)
– Overvoltage Protection (OVP)
ect, and Overload
transmission and power
The POE90U1BT Series Power over Ethernet (PoE) single port
power injector is designed to meet the demanding data rate and
power requirements of cameras with high-quality streaming video
capabilities. The injector offers total output power of 90 W, which
meets the IEEE802.3BT standards for detection, connection,
disconnection, and fault protection.
The POE90U1BT Series power injector is compatible with 10/100/
1000Base-T systems. AC input voltage range is 100 to 240 VAC
which is 90 to 264 VAC with input frequency from 47 to 63 Hz.
Maximum output load current is 1.6 A at 56 VDC.
± 10%
C4052 / NEW 2-14-18
TECHNICAL SPECIFICATIONS
Pelco, the Pelco logo, and other trad emarks associated with Pelco products referred
to in this publication are trademarks of Pelco, Inc. or its affiliates. ONVIF and the
ONVIF logo are trademarks of ONVIF Inc. All othe r product names and
services are the property of their respective comp anies.
Product specifications and availability are subject to change without no tice.
©Copyright 2018, Pelco, Inc. All rights reserved.
16.60
(6.54)
17.80
(7.01)
4.36
(1.72)
8.00
(3.14)
MODEL
Model Description Power Cord
POE90U1BT* 90 watt, single-port PoE injector No power cord
POE90U1BT-US 90 watt, single-port PoE injector US power cord
POE90U1BT-EUK 90 watt, single-port PoE injector EU and UK power cord
* A power cord is required for operation, but is not provided/shipped
with this model.
ELECTRICAL
Input Voltage Rating 100 to 240 VAC
AC Input Current 2.5 A (RMS) maximum for 90 VAC;
Leakage Current 3.5
AC Input Frequency 47 to 63 Hz
AC Inrush Current 50 A (RMS) maximum for 115 VAC;
Total Output Power 90 W
Ripple and Regulation 300 mV maximum
Efficiency 75% (typical) at maximum load; 120
Hold-up Time 10 milliseconds minimum; 120 VAC 60 Hz
Over Voltage/Current,
Short Circuit Protection The output can be shorted permanently
Input Connectors IEC320 inlet 3-pin
Output Connection +pins 3, 6, 4, 5/-pins 1, 2, 7, 8
1.2 A (RMS) maximum for 240 VAC
mA maximum at 264 VAC 50 Hz
75 A (RMS) maximum for 230 VAC
VAC, 60 Hz
maximum load
without damage
ENVIRONMENTAL
Operating Temperature –20° to 40°C (–4° to 104°F)
Storage Temperature –25° to 65°C (–13° to 149°F)
Humidity 5% to 90%
CERTIFICATIONS
• CE, Class B
• FCC Part 15, Class B
• EN55022/EN55032, Class B
• UL/cUL Listed
VALUES IN PARENTHESES ARE INCHES; ALL OTHERS ARE
CENTIMETERS.
Pelco, Inc.
625 W. Alluvial Ave., Fresno, California 93711 United States
USA & Canada Tel (800) 289-9100 Fax (800) 289-9150
In
ternational Tel +1 (559) 292-1981 Fax +1 (559) 348-1120
www.pelco.com
Loading...