Pelco POE75U-1UP-US, POE75U-1UP, POE75U-1UP-EUK Specsheet
PRODUCT SPECIFICATION
transmission and power
POE75U-1UP Series Adapter for Spectra® Enhanced
75 WATT POWER OVER ETHERNET SINGLE PORT INJECTOR
Product Features
• 75 Watts of High PoE Power for the Outdoor Spectra® Enhanced PTZ
• Diagnostic LEDs
• Broken Wire Detection
• Proprietary Detection, Disconnect, and Overload
• Full Protection
– Overcurrent Protection (OCP)
– Overvoltage Protection (OVP)
The POE75U-1UP Power over Ethernet (PoE) single port power
injector is designed to meet the demanding data rate and power
requirements of outdoor Spectra Enhanced IP cameras with
high-quality streaming video capabilities. The injector offers total
output power of 75 W, which meets the IEEE802.3af and IEEE802.3at
standards for detection, connection, disconnection, and fault
protection.
The POE75U-1UP power injector is compatible with 10/100/
1000Base-T systems. AC input voltage ranges from 100 to 240 VAC
with input frequency from 47 to 63 Hz. Maximum output load current
is 350 mA at 56 VDC.
International Standards
Organization Registered Firm;
ISO 9001 Quality System
C4020 / NEW 5-12-15
TECHNICAL SPECIFICATIONS
Pelco, the Pelco logo, and other trad emarks associated with Pelco products referred
to in this publication are trademarks of Pelco, Inc. or its affiliates. ONVIF and the
ONVIF logo are trademarks of ONVIF Inc. All othe r product names and
services are the property of their respective comp anies.
Product specifications and availability are subject to change without no tice.
©Copyright 2015, Pelco, Inc. All rights reserved.
8.00
(3.15)
16.60 (6.53)
5.60
(2.20)
17.80 (7.00)
0.90
(0.35)x2
0.35 (0.13) x2
4.36
(1.71)
0.12 (0.04)
4.26 (1.67)
MODEL
Model Description Power Cord
POE75U-1UP* 75 watt, single-port PoE injector No power cord
POE75U-1UP-US 75 watt, single-port PoE injector US power cord
POE75U-1UP-EUK 75 watt, single-port PoE injector EU and UK power cord
* A power cord is required for operation, but is not provided/shipped
with this model.
ELECTRICAL
Input Voltage Rating 100 to 240 VAC ± 10%
AC Input Current 2 A (RMS) maximum for 90 VAC;
Leakage Current 3.5
AC Input Frequency 47 to 63 Hz
AC Inrush Current 30 A (RMS) maximum for 115 VAC;
Total Output Power 75 W
Ripple and Regulation 250 mV maximum
Efficiency 80% (typical) at maximum load; 120
Hold-up Time 10 milliseconds minimum; 120 VAC and
Transient O/P Voltage
Protection 60 V maximum
Over Voltage/Current,
Short Circuit Protection Outputs equipped with short circuit
Input Connectors IEC320 inlet 3-pin
Output Connection 4-pair powering for full power;
IEEE 802.3af/at
Interoperability If 25 kohm is detected the unit operates in
1.2 A (RMS) maximum for 240 VAC
mA maximum at 254 VAC 60 Hz
60 A (RMS) maximum for 230 VAC
VAC, 60 Hz
maximum load
protection and overload protection as per
802.3af specifications except maximum
average current is 1.34 A; the output can be
shorted permanently without damage
2-pair powering for IEEE802.3at mode
IEEE802.3at mode; 33.6 W, 2 pair powering;
12.5 k detection resistance required for full
power
FRONT PANEL INDICATORS/FUNCTIONS
Status/Color Description
Green LED 1 DC power OK
Red LED Fault detected
Solid Green LED 2 Power detected connect at 75 W
Flashing Green LED 2 IEEE802.3at detected connect at 30 W
ENVIRONMENTAL
Operating Temperature –20° to 40°C (–4° to 104°F)
Storage Temperature –25° to 65°C (–13° to 149°F)
Maximum Humidity Gradient 5% to 90%
CERTIFICATIONS
• CE, Class B
• FCC, Class B
• UL/cUL Listed
VALUES IN PARENTHESES ARE INCHES; ALL OTHERS ARE
CENTIMETERS.
Pelco by Schneider Electric
3500 Pelco Way, Clovis, California 93612-5699 United States
USA & Canada Tel (800) 289-9100 Fax (800) 289-9150
International Tel +1 (559) 292-1981 Fax +1 (559) 348-1120
www.pelco.com www.pelco.com/community
Loading...