PRODUCT SPECIFICATION
power solutions
POE20U560G Series High-Power, Single-Port Injector
19.6 W
ATT POWER OVER ETHERNET ADAPTER
Product Features
• Fully Compliant Detection, Disconnect, Overload and Voltage Control
(IEEE802.3af)
• UNH-IOL Test Report
• Diagnostic LEDs
• Full Protection
Overcurrent Protection (OCP)
–
– Overvoltage Protection (OVP)
• Nonvented Case
The POE20U560G Power over Ethernet (PoE) single port power
injector is designed to meet the demanding data rate and power
requirements of IP cameras with high-quality streaming video
capabilities. The injector offers total output power of 19.6 W, which
meets the IEEE 802.3af standard for detection, connection,
disconnection, and fault protection.
The POE20U560G power injector is compatible with 10/100Base-T
systems and systems up to 1000 Mbps. AC input voltage ranges from
90 to 264 VAC with input frequency from 47 to 63 Hz. Maximum
output load current is 350 mA and O/P voltage is 56 VDC.
International Standards
Organization Registered Firm;
ISO 9001 Quality System
C2942 / REVISED 12-16-10
TECHNICAL SPECIFICATIONS
MODELS
POE20U560G High-power, single-port PoE injector
POE20U560G-UK High-power, single-port PoE injector with
United Kingdom power cord
POE20U560G-EU High-power, single-port PoE injector with
220 V, European power cord
ELECTRICAL
Input Voltage 90 to 264 VAC
Input Voltage Rating 100 to 240 VAC
AC Input Current 0.5 A (RMS) maximum for 90 VAC;
0.35 A (RMS) maximum for 240 VAC
Leakage Current 0.25 mA maximum at 254 VAC, 60 Hz
AC Input Frequency 47 to 63 Hz
AC Inrush Current 15 A (RMS) maximum for 115 VAC;
20 A (RMS) maximum for 230 VAC
Total Output Power 19.6 W
Efficiency 65% (typical) at maximum load; 120 VAC,
60 Hz
Hold-up Time 16 milliseconds minimum; 120 VAC and
maximum load
Transient O/P Voltage
Protection 60 V maximum at switch; on and off at any
AC line phase
Over Voltage/Current,
Short Circuit Protection Outputs equipped with short circuit protection
and overload protection according to 802.3af
specification; the output can be shorted
permanently without damage
Input Connectors IEC320 inlet 3-pin
FRONT PANEL INDICATORS/FUNCTIONS
Input Power Green
Fault Indicator Red
Valid 802.3af
Connection Load Green
ENVIRONMENTAL
Operating Temperature 32° to 104°F (0° to 40°C)
Storage Temperature –13° to 149°F –25° to 65°C)
Maximum Humidity Gradient 5% to 90%
CERTIFICATIONS
• CE, Class B
• FCC, Class B
Pelco, Inc.
USA & Canada Tel (800) 289-9100 Fax (800) 289-9150
International Tel +1 (559) 292-1981 Fax +1 (559) 348-1120
www.pelco.com
Pelco, the Pelco logo, and other trademarks associated with Pelco products referred
to in this publication are trademarks of Pelco, Inc. or its affiliates. All other
product names and services are the property of their respective companies.
Product specifications and availability are subject to change without notice.
©Copyright 2010, Pelco, Inc. All rights reserved.
Loading...