Pelco POE130-XT Specsheet

PRODUCT SPECIFICATION

transmission and power

POE130-XT Single-Port PoE Gigabit Extender

EXTENDS POWER OVER ETHERNET AND ETHERNET DATA UP TO 200 METERS

Product Features

• Extend PoE Installation Range by Additional 100 Meters

• Supports 10/100/100 Mbps Data Rates

• Provides 802.3af Power Levels When Powered by Any 802.3at

Source

• Provides 802.3at Power Levels When Powered by PD-9601G/AC

Midspans

• Cost Effective Installation: No Need For Local Power

• Plug and Play Installation: No Configuration Needed

• Fully Compliant 25K Signature Resistance Detection

(IEEE802.3at and IEEE802.3af)

• Boost Circuit to Compensate for Wire Drops

• Extends Ethernet up to 400 Meters (1640.42 Feet) with Cascaded PoE

Extender

The POE130-XT is a single-port Power over Ethernet (PoE) Gigabit extender that is designed to meet the demanding data rate and power requirements of IP cameras with high-quality streaming video capabilities. A single PoE extender can repeat Ethernet up to 200 meters. When cascading three extenders with a PD9601G midspan injector, Ethernet and PoE can extend up to 400 meters (1640.42 feet) to an IEEE802.3af device.

The POE130-XT extenders can be cascaded to reach up to 400 meters from the closest datacenter or network closet so you can easily install IP cameras where you need them. DC input voltage range is 46 to 57 VDC. DC input current at maximum load is 700mA at 46 VDC. Maximum total output power is 33 W with 50 W 4-pair IEEE802.3AT input and is 25K signature resistance detection output compliant.

International Standards

Organization Registered Firm;

ISO 9001 QualitySystem

C5006S / NEW 6-20-19

TECHNICAL SPECIFICATIONS

MODEL

POE130-XT Single-Port PoE Gigabit extender powered by

IEEE802.3at source

ELECTRICAL

Input (802.3at)

Input Source Receives power from an IEEE802.3at source Input Detection 25K detection IEEE802.3at compliance DC Input Voltage Range 46 VDC to 57 VDC Total Output Power 15 W with IEEE802.3at input DC Output Voltage 44 VDC to 55 VDC Output Detection 25K detection IEEEE802.3af compliance

Input (802.3at 4-pair, 60 W)

Input Source Receives power from an IEEE802.3at 4-pair

Input Detection 25K detection IEEE802.at compliance DC Input Voltage Range 46 VDC to 57 VDC DC Input Current .7 A maximum load Total Output Power 33 W DC Output Voltage 44 VDC to 55 VDC Output Detection 25K detection IEEE802.3af compliance

Connection

Input/Output Connectors RJ-45 Input Connection Supports alternatives A and B Output Connection Supports alternatives A and B

VALUES IN PARENTHESES ARE INCHES; ALL OTHERS ARE CENTIMETERS.

(60 W) source

5.00

(1.96)

FRONT PANEL INDICATORS/FUNCTIONS

Power LEDs

LED Color and Status

PoE Input Status PoE Output Status

Green ON PoE input power enabled PoE output power enabled

Green OFF PoE input power disabled PoE output power diabled

Network LEDs

LED Color and Status Network Input/Output Status

Orange ON Network connection

Orange OFF No network connection

Orange Blinks, 12 Hz rate 10/100/1000 Mbps communication data rate

ENVIRONMENTAL

Operating Temperature

Megabit Data Rates at

10 Mb and 100 Mb 0° to 50°C (32° to 122°F)

Gigabit Data Rates 0° to 40°C (32° to 104°F) Storage Temperature –20° to +70°C (–4° to 158°F) Maximum Humidity Gradient 5% to 90%

CERTIFICATIONS

• RoHS Compliant

• WEEE Compliant

•CE

• FCC Part 15, Class B

• EN 55032 Class B (Emissions)

• EN 55024 (Immunity)

• VCCI

OPTIONAL ACCESSORIES

PD9601G/AC-US, -EUK Single-port, HPoE midspan POE130-ATEU, -ATUS Single-port, IEEE802.3at midspan

POE1AT-US, -EU Single-port, IEEE802.3at midspan POE4ATN-US, -EU 4-port, IEEE802.3at midspan POE8ATN-US, -EU 8-port, IEEE802.3at midspan POE16ATN-US, -EU 16-port, IEEE802.3at midspan Note: The "EU/EUK" or "US" suffix indicates a European or US power cord.

11.10

11.20 (4.37)

(4.41)

R 4.5

Pelco

625 W. Alluvial, Fresno, California 93711 United States

USA & Canada Tel (800) 289-9100 Fax (800) 289-9150 International Tel +1 (559) 292-1981 Fax +1 (559) 348-1120 www.pelco.com www.pelco.com/community

7.11

(2.80)

2.94

(1.16)

3.07

(1.21)

Pelco, the Pelco logo, and other trademarks associated with Pelco products referred

to in this publication are trademarks of Pelco, Inc. or its affiliates. ONVIF and the

ONVIF logo are trademarks of ONVIF Inc. All other product names and

Product specifications and availability are subject to change without notice.

services are the property of their respective companies.