Pelco PMCS19A, PMCS17A User Manual

®

Installation/Operation

PMCS14A, PMCS17A, and PMCS19A
Super-High Resolution Color Monitors

C1991M-B (2/01)

Pelco • 3500 Pelco Way, Clovis • CA 93612-5699 USA • Pelco Online @ http://www.pelco.com

In North America and Canada: Tel [phone] or FAX [phone] • DataFAX [phone]

International Customers: Tel [phone] or FAX [phone] • DataFAX [phone]

PelcoEurope BV • Dillenburg Center, Dillenburgstraat 5F • 5652 AM Eindhoven • The Netherlands

Tel [phone] • FAX [phone]

IMPORTANT SAFEGUARDS AND WARNINGS

1. Operate this unit only from the type of power source indicated on the label.

2. Do not block or cover ventilation openings on the back or bottom of the monitor cabinet.

3. Do not place this monitor near a radiator or heating vent.

4. Do not push objects of any kind through cabinet openings. This may result in fire or electrical shock.

5. Before adding attachments always ask a service technician to perform routine safety tests to deter­mine that equipment is in safe operating condition. Ground potential tests should be part of the rou­tine safety check made by the service technician.

6. Do not place monitor on an unstable cart, stand or shelf where it may fall and injure personnel or
damage equipment.

7. Route power cords so that they cannot be walked upon or tripped over. Do not allow anything to rest
on the power cord.

8. Do not install monitor in wet areas, or where it may be exposed to rain or water. Do not spill liquid of
any kind on the unit.

9. Unplug the power cord from the unit before cleaning the display. Use only a damp cloth. Do not use
alcohol, spirits, or ammonia to clean the display. DO NOT ATTEMPT TO CLEAN THE INTERIOR
OF THIS UNIT - THIS ACTION MUST BE PERFORMED BY A SERVICE TECHNICIAN AS RE­QUIRED DURING NORMAL MAINTENANCE.

10. Refer all servicing to qualified service personnel. REMOVAL OF BACK COVER BY UNAUTHO­RIZED PERSONNEL MAY EXPOSE THE USER TO DANGEROUS VOLTAGES OR OTHER HAZ­ARDS.

11. Unplug the unit immediately and notify a service technician:
a. If liquid has been spilled into the display or the display has been exposed to rain or water.
b. If the unit has been dropped or the cabinet damaged.
c. If fuses continue to blow.
d. If the power cord is damaged or frayed.
e. If a distinct change from normal operation is apparent.

When replacement parts are required, be sure that the service technician uses components specified by
the manufacturer. UNAUTHORIZED SUBSTITUTIONS MAY RESULT IN FIRE, ELECTRICAL SHOCK
OR OTHER HAZARDS.

Upon completion of any service or repairs, ask a technician to perform safety checks to determine that
the equipment is in safe operating condition.

WARNING SERIOUS SHOCK HAZARDS EXIST WITHIN THE COVER OF THIS MONITOR.
DO NOT OPEN THE COVER UNDER ANY CIRCUMSTANCES. THERE ARE NO USER SER­VICEABLE COMPONENTS INSIDE.

[ 2 ] Pelco Manual C1991M-B (2/01)

DESCRIPTION

The PMCS14A, PMCS17A, and PMCS19A are super-high resolution color monitors. All monitors have
computer-grade picture tubes.The PMCS14A and PMCS17A produce horizontal resolution of 700 TV
lines and PMCS19A produces 800 TV lines. Standard high-resolution monitors produce only about 350
TV lines.

The monitors automatically detect the power supply input (90-260 VAC, 50/60 Hz).

Models

PMCS14A Super-high resolution color monitor, 14-inch (35.56 cm) diagonal picture display
PMCS17A Super-high resolution color monitor, 17-inch (43.18 cm) diagonal picture display
PMCS19A Super-high resolution color monitor, 19-inch (48.26 cm) diagonal picture display

Pelco Manual C1991M-B (2/01) [ 3 ]