Pelco PMCL-WMT, PMCL-19WRM, PMCL-19ARM, PMCL-17ARM Specsheet

PRODUCT SPECIFICATION
PMCL-WM1A SINGLE-ARM WALL MOUNT
AND PMCL SERIES MONITOR
PMC Series Mounts
WALL/CEILING/RACK MOUNTS, MONITORS
viewing solutions
Single Swing-Arm Wall Mount
For Use with VESA
PMCL500 Series LCD Monitors
Rack Mounts for All 200/300/400 Series LCD Monitors
Fixed and Tilt Wall Mount for PMCL524F, PMCL532F, PMCL542F,
PMCL547F, and PMCL552F Monitors
VESA-Compliant Wall and Ceiling Mounts
Can Be Used with Pelco Series LCD Monitors
Unique Tilt/Swivel Head Design Ensures Optimum Viewing Angle
Easy to Install
Aluminum or Steel Construction
For Indoor Applications Only
Pelco’s family of monitor mounts has been designed for use with
®
-compliant monitors. Mounts for the PMCL 200/300/400/500
VESA Series monitors include several wall and ceiling mounts. Three rack mounts are available for 200/300/400 Series monitors. Many of the mounts feature a unique tilt/swivel capability, which allows an LCD monitor to be swiveled 360 degrees for portrait or landscape viewing and tilted 35 degrees up or down. This tilt/swivel quality ensures the proper viewing angle in any application. Made from heavy-duty aluminum, these mounts are designed to support up to 90 pounds in any indoor installation.
The PMCL-WM and PMCL-WMT are two-piece wall mounts. One piece attaches to the rear of any monitor, and the other piece fastens to a wall. The monitor then slides into the V-shaped piece on the wall, making installation quick and easy. A setscrew secures the two sections together. The PMCL-WMF is a flat wall mount used for Full High Definition (FHD) monitors. The PMCL-WMT is equipped with tilt/swivel capabilities, while the PMCL-WMTF is tilt only for FHD monitors.
The PMCL-WM1A is a single-arm wall mount that is equipped with convenient tilt/swivel swing arms, which provides greater viewing flexibility.
®
-Compliant Monitors and Selected
The tilt/swivel PMCL-CMP allows an LCD monitor to be mounted from the ceiling. It is equipped with an adjustable 15- to 30-inch (38 to 76 cm) telescoping pole. The PMCL-CM is a similar ceiling mount that does not include a pole. This mount allows a customer to purchase any length of 1.5-inch NPT threaded pipe for use in applications with higher ceilings. Both of these ceiling mounts can also be used with Pelco’s MRCA ceiling mount.
The PMCL-VAF is an adapter plate that attaches to the PMCL-CM ceiling mount and PMCL-CMP ceiling mount with pole. This adapter plate allows the mounts to be used with larger format monitors, such as Pelco's PMCL542F and PMCL547F monitors. It accommodates monitors with 600 x 400 mm hole patterns.
The PMCL-V200 is an adapter plate that attaches to the
PMCL-WM, PMCL-WMT, PMCL-WM1A, PMCL-CM, and PMCL-CMP. This adapter plate allows the mounts to be used with
the PMCL532F larger format monitor. It also accommodates monitors with 200 x 200 mm hole patterns.
There are three rack mount kits for installing monitors in standard 19-inch (48 cm) equipment racks: the PMCL-17ARM, PMCL-19ARM, and PMCL-19WRM, which accommodate the 17-inch (43 cm), 19-inch (48 cm), and the 19-inch (48 cm) wide monitors, respectively. These mounts allow the monitor to tilt up or down for optimum viewing.
International Standards
Organization Registered Firm;
ISO 9001 Quality System
C2219 / REVISED 8-10-10
TECHNICAL SPECIFICATIONS
PMCL-WMT
Ø 0.28
(0.72)
2.49
(6.33)
2.24
(5.69)
7.20
(18.28)
2.81
(7.13)
2.99
(7.60)
1.31
(3.31)
2.95
(7.49)
3.95
(10.03)
2.95
(7.49)
3.95
(10.03)
PMCL-WM
WALL MOUNTS
MODELS
PMCL-WMT Tilt/swivel single-arm wall mount PMCL-WM Fixed wall mount PMCL-WM1A Tilt/swivel single-arm wall mount PMCL-WMTF Tilt wall mount for large FHD monitors PMCL-WMF Flat wall mount for large FHD monitors
MECHANICAL
Swivel Adjustment 360° (PMCL-WMT, PMCL-WM1A only) Tilt Adjustment 35° (PMCL-WMT, PMCL-WM1A only)
CERTIFICATIONS
UL/cUL Listed PMCL-WMT and PMCL-WM1A only
GENERAL
Suggested Mounting Method Mounting hardware is not supplied.
PMCL-WM, PMCL-WMT Secure to solid surface with four 1/4-inch
PMCL-WM1A Secure to solid surface with three 5/16-inch
PMCL-WMF, PMCL-WMFT Attach the mount bracket to a solid wall using
Maximum Load
PMCL-WM 35.00 lb (15.88 kg) PMCL-WMT, PMCL-WM1A PMCL-WMF 264.55 lb (120.00 kg) PMCL-WMTF 264.55 lb (120.00 kg)
Construction
PMCL-WM, PMCL-WMT, PMCL-WM1A Aluminum
PMCL-WMF, PMCL-WMFT Steel Finish Black polyester powder coat Weight Unit Shipping
PMCL-WMT 3.05 lb (1.38 kg) 6 lb (2.72 kg)
PMCL-WM 1.60 lb (0.73 kg) 3 lb (1.36 kg)
PMCL-WM1A 3.55 lb (1.61 kg) 6 lb (2.72 kg)
PMCL-WMF 11.24 lb (5.10 kg) 13 lb (5.89 kg)
PMCL-WMTF 4.80 lb (2.17 kg) 6 lb (2.72 kg)
diameter x 2-inch wedge anchors. In applications where wall studs are encountered, use four 1/4-inch diameter x 2-inch lag bolts or two lag bolts and two 1/4-inch diameter x 2-inch toggle bolts.
diameter x 2-inch wedge anchors or use three 5/16-inch diameter x 2-inch lag bolts in applications where wall studs are encountered.
eight screws that are able to hold
264.6 lb (120 kg).
90.00 lb (40.82 kg)
(10.033)
3.950
2.950
(7.500)
3.950
(10.033)
2.950
(7.500)
3.792
(9.632)
7.197
(18.280)
2.809
(7.135)
2.240
(5.690)
2.492
(6.330)
2.989
(7.592)
Ø 0.283
(0.719)
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS; ALL OTHERS ARE INCHES.
Loading...
+ 4 hidden pages