Pelco PMCLNBWMT, PMCLNBWMS, PMCL2-CMPS, PMCL2-CMPL, PMCLNBWMF Specsheet

PMCLNBWMF
PMCLNBWMT PMCLNBWMS
PMCL2-WM1A
PMCL2-WMT
PMCL2-CMPS
PMCL Series Mounts
Product Specification viewing solutions
PMCL Series Mounts
Wall and Ceiling Mounts for Flat Panel Monitors

Product Features

l Can Be Used With Pelco PMCL6 Series
Monitors
l VESA®-Compliant
l Articulating Arm Wall Mount
l Fixed and Tilt Mounts
l Unique Tilt/Swivel Head Design
Ensures Optimum Viewing Angle
l Easy to Install
l For Indoor Applications Only
Pelco’s PMCL Series of monitor mounts has been designed for use with flat panel, VESA®­compliant monitors. The PMCL Mount Series includes several wall and ceiling monitor mounts. Many of the mounts feature a unique tilt/swivel capability, which allows the monitor to be swiveled for portrait or landscape viewing and tilted up or down. This tilt/swivel feature ensures the proper viewing angle in any application. PMCLNB mounts are designed to support up to 175 lb. (79.38 kg). PMCL2 mounts are designed to support up to 50 lb. (22.7 kg).

PMCLNBWMF, PMCLNBWMT, and PMCLNBWMS mounting solutions

The PMCLNBWMF flat wall mount, PMCLNBWMT tilt/swivel mount, and PMCLNBWMS articulating arm wall mounts are designed for use with larger flat panel monitors. The PMCLNBWMF and PMCLNBWMT mounts supports a mounting pattern from 200 x 200 mm to 815 x 525 mm. The PMCLNBWMS mount supports a mounting pattern from 200 x 200 mm to 735 x 518 mm. All three mounting solutions support a weight capacity of up to 175 lb (79.38 kg).
PMCL2-WM, PMCL2-WMT, and PMCL2-WM1Amounting solutions
The PMCL2-WM flat wall mount, PMCL2-WMT tilt/pivot mount, and PMCL2-WM1A articulating arm wall mounts are designed for use with smaller flat panel monitors. These PMCL2 mounts support mounting patterns from 75 x 75 mm up to 200 x 200 mm (with included adapter plate) and a weight capacity of up to 50 lb (22.7 kg).

PMCL2-CM, PMCL2-CMPS, and PMCL2-CMPL mounting solutions

The tilt/swivel PMCL2-CMPS and PMCL2-CMPL allow smaller flat panel monitors to be mounted from the ceiling. These mounts are equipped with an adjustable telescoping pole. The PMCL2-CM is a similar ceiling mount that does not include a pole allowing the use of any length of 1.5-in. NPT threaded pipe in
C4074S-A | 01/19 1
PMCL Series Mounts
Product Specification viewing solutions
applications with higher ceilings. These PMCL2 mounts support mounting patterns from 75 x 75 mm up to 200 x 200 mm (with included adapter plate)and a weight capacity of up to 50 lb (22.7 kg).

Wall Mounts

Models

Model Description
PMCLNBWMF Flat wall mount for 43-in. or larger monitors
PMCLNBWMT Tilt mount for 43-in. or larger monitors
PMCLNBWMS Scissor-style articulating arm wall mount for 43-in. or larger monitors
PMCL2-WM1A
PMCL2-WM
PMCL2-WMT Single-stud tilt and pivot mount
Dual-arm swing-out mount
Fixed low-profile flat panel mount

Mechanical

Parameter Specification
Swivel adjustment
PMCLNBWMF N/A
PMCLNBWMT N/A
PMCLNBWMS 45°
PMCL2-WM1A 90°
PMCL2-WM N/A
PMCL2-WMT N/A
Tilt/pivot adjustment
PMCLNBWMF N/A
PMCLNBWMT 10°
PMCLNBWMS 10°
PMCL2-WM1A 15°
PMCL2-WM N/A
PMCL2-WMT 15°
C4074S-A | 01/19 2
PMCL Series Mounts
Product Specification viewing solutions

General

Parameter Specification
Included Hardware
PMCLNBWMF Wall Plate with Fixed Brackets (1), universal hardware pack (1), manual (1)
PMCLNBWMT Wall Plate with Tilt Brackets (1), universal hardware pack (1), manual (1)
PMCLNBWMS Swingout Wall Mount (1), universal hardware pack (1), manual (1)
PMCL2-WM1A Mount (1), adapter plate, universal hardware pack (1), manual (1)
PMCL2-WM Wall mount (1), adapter plate (1), universal hardware pack (1) which includes
universal spacers and M4-M10 screws
PMCL2-WMT Wall mount (1), adapter plate (1), universal hardware pack (1)
Suggested Mounting Method
PMCLNBWMF Secure to wall with studs with a minimum of four lag bolts. Two wall studs are
required for mounting. Use a minimum of two lag bolts for each wall stud.
PMCLNBWMT Secure to wall with studs with a minimum of four lag bolts. Two wall studs are
required for mounting. Use a minimum of two lag bolts for each wall stud.
PMCLNBWMS Secure to wall studs with a minimum of four 5/16-in. diameter x 3-in. lag bolts.
Use a flat washer for each lag bolt. Two wall studs are required for mounting. Use a minimum of two lag bolts for each wall stud. It is recommended that two people be involved in installing this mount.
PMCL2-WM1A Secure to wall stud using four lag bolts, or secure to concrete surface with four
wedge anchors.
PMCL2-WM Secure to wall stud using two lag bolts, or secure to solid surface with four wall
anchors.
PMCL2-WMT Secure to wall stud using four lag bolts, or secure to concrete surface with four
wedge anchors.
Maximum Load
PMCLNBWMF 175.00 lb. (79.38 kg )
PMCLNBWMT 175.00 lb. (79.38 kg )
PMCLNBWMS 175.00 lb. (79.38 kg )
PMCL2-WM1A 50 lb. (22.7 kg)
PMCL2-WM 50 lb. (22.7 kg)
PMCL2-WMT 50 lb. (22.7 kg)
Construction Steel
Dimensions
PMCLNBWMF 33.25 x 21.38 x 0.96 in. (84.45 x 54.31 x 2.43 cm)
PMCLNBWMT 33.25 x 21.38 x 1.97 in. (84.45 x 54.30 x 5.00 cm)
C4074S-A | 01/19 3
PMCL Series Mounts
Product Specification viewing solutions
Parameter Specification
PMCLNBWMS 30.19 - 34.31 x 22.23 - 26.43 x 3.11 - 15.90 in. (76.68 – 87.14 x 56.47 – 67.12 x
7.90 – 40.39 cm)
PMCL2-WM1A 8.88 x 8.88 x 3.7 in. (225.55 x 225.55 x 93.98 mm)
PMCL2-WM 8.88 x 8.88 x 81.38 in. (235 x 225 x 21 mm)
PMCL2-WMT 3.94 - 8.88 x 9.5 x 2.84 in. (100 - 225 x 241 x 72 mm)
Unit Weight
PMCLNBWMF 12.00 lb. (5.44 kg)
PMCLNBWMT 15.00 lb. (6.80 kg)
PMCLNBWMS 40.00 lb. (18.14 kg)
PMCL2-WM1A 11.1 lb. (5.03 kg)
PMCL2-WM 4.02 lb. (1.8 kg)
PMCL2-WMT 6.44 lb. (2.9 kg)
Mounting pattern
PMCLNBWMF 7.87 x 7.87 in. (200 x 200 mm) to 32.09 x 20.67 in. (815 x 525 mm)
PMCLNBWMT 7.87 x 7.87 in. (200 x 200 mm) to 32.09 x 20.67 in. (815 x 525 mm)
PMCLNBWMS 7.87 x 7.87 in. (200 x 200 mm) to 28.94 x 20.39 in. (735 x 518 mm)
PMCL2-WM1A 2.95 x 2.95 in. (75 x 75 mm) to 7.87 x 7.87 in. (200 x 200 mm)
PMCL2-WM 2.95 x 2.95 in. (75 x 75 mm) to 7.87 x 7.87 in. (200 x 200 mm)
PMCL2-WMT 2.95 x 2.95 in. (75 x 75 mm) to 7.87 x 7.87 in. (200 x 200 mm)
Finish Black polyester powder coat

PMCLNBWMF Product Image and Dimensional Drawings

Figure 1: PMCLNBWMF product image
C4074S-A | 01/19 4
84.45
(33.25)
81.50
(32.09)
14.24
(5.61)
52.90
(20.83)
55.44
(21.83)
19.86 (7.82)
2.43
(0.96)
28.80
(11.34)
12.70 (5.00)
Ø 0.83
(0.33)
Ø 0.88
(0.35)
60.96
(24.00)
45.72
(18.00)
40.64
(16.00)
PMCL Series Mounts
Product Specification viewing solutions
Figure 2: PMCLNBWMF dimensional drawing
Note: Values in parentheses are inches; all others are centimeters.

PMCLNBWMT Product Image and Dimensional Drawings

Figure 3: PMCLNBWMT product image
C4074S-A | 01/19 5
84.45
(33.25)
80.08
(31.53)
14.24 (5.61)
60.96
(24.00)
45.72
(18.00)
40.64
(16.00)
52.73
(20.76)
54.30
(21.38)
28.80
(11.34)
19.86 (7.82)
5.00
(1.97)
12.70 (5.00)
Ø 0.95 (0.375)
10°
Ø 0.83
(0.32)
PMCL Series Mounts
Product Specification viewing solutions
Figure 4: PMCLNBWMT dimensional drawing
Note: Values in parentheses are inches; all others are centimeters.

PMCLNBWMS Product Image and Dimensional Drawings

Figure 5: PMCLNBWMS product image
C4074S-A | 01/19 6
Loading...
+ 12 hidden pages