PMCL600-Series SurveillanceMonitors
Operations Manual
Document number:C6699M-A.a
Publication date:06/21
PMCL600-Series SurveillanceMonitors Operations Manual
Table of Contents
Important Notices 3
Regulatory Notices 3
Radio and Television Interference 3
Warranty Statement 3
Korean Class BEMC 3
ULSafety Notices 3
Safety Warning 4
Additional Precautions 4
Models 5
Product Features 5
On-screen Display Menus 5
Front Panel Control Buttons 5
Picture Menu 6
Sound Menu 7
Option Menu 7
Screen Menu 7
Channel Selection 7
Troubleshooting 8
Identifying and Fixing Problems 8
Pelco Troubleshooting Contact Information 9
C6699M-A.a | 06/21 2
PMCL600-Series SurveillanceMonitors Operations Manual
Important Notices
For information about Pelco’s product-specific important notices and thereto related information, refer to
www.pelco.com/legal.
Regulatory Notices
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Radio and Television Interference
This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant
to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a residential environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. However, there is no
guarantee that the interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
l Reorient or relocate the receiving antenna.
l Increase the separation between the equipment and the receiver.
l Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
l Consult the dealer or an experienced radio/TV technician for help.
You may also find helpful the following booklet, prepared by the FCC: How to Identify and Resolve
Radio-TV Interference Problems. This booklet is available from the U.S. Government Printing Office,
Washington D.C. 20402.
Changes and modifications not expressly approved by the manufacturer or registrant of this equipment
can void your authority to operate this equipment under Federal Communications Commission’s rules.
CAN ICES-3 (B)/NMB-3(B)
Warranty Statement
For information about Pelco’s product warranty and thereto related information, refer to
www.pelco.com/warranty.
Korean Class BEMC
ULSafety Notices
The product shall be installed by a qualified service person and the installation shall conform to all local
codes.
C6699M-A.a | 06/21 3
Loading...