7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one blade wider than the
other. A grounding plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the points where they exit from
the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as powersupply cord or plus is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
14. Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases shall be placed on the
apparatus.
15. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
16. Installation should be done only by qualified personnel and conform to all local codes.
17. Unless this unit is specifically marked as NEMA Type 3, 3R, 3S, 4, 4X, 6, or 6P enclosure, it is designed for indoor use only and it must not
be installed where exposed to rain and moisture.
18. Use only installation methods and materials capable of supporting four times the maximum specified load.
19. Only use replacement parts recommended by Pelco.
20. Avoid touching the screen directly with your fingers as the oils from your skin may be difficult to remove from the LCD.
21. Do not apply direct pressure on the screen.
22. Keep the monitor in a dust-free environment and away from strong electromagnetic fields.
23. Do not use attachments, such as mounts, that are not recommended by Pelco. They may be hazardous.
24. Do not place the monitor on an unstable stand, bracket, or mount. The unit may fall, causing serious damage to the unit or injury to a
person. Only use mounts recommended by Pelco.
25. A CCC-approved power cord must be used to power this equipment when used in China.
The product and/or manual may bear the following marks:
This symbol indicates that dangerous voltage constituting a risk of electric shock is present
within this unit.
This symbol indicates that there are important operating and maintenance instructions in
the literature accompanying this unit
RISK OF ELECTRIC SHOCK.
CAUTION:
DO NOT OPEN.
4C2927M-C (12/06)
Regulatory Notices
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RADIO AND TELEVISION INTERFERENCE
This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and the receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
You may also find helpful the following booklet, prepared by the FCC: “How to Identify and Resolve Radio-TV Interference Problems.” This
booklet is available from the U.S. Government Printing Office, Washington D.C. 20402.
Changes and Modifications not expressly approved by the manufacturer or registrant of this equipment can void your authority to operate this
equipment under Federal Communications Commission’s rules.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
C2927M-C (12/06)5
Description
The 400 Series high performance LCD monitors are designed specifically for the security industry and provide high quality display of video or
computer signals using multiple inputs. These 15-, 17-, and 19-inch monitors use a color, thin film transfer (TFT) active matrix LCD panel that
automatically adapts to the appropriate input resolution.
The 400 Series is distinguished by many performance-enhancing features such as a 3-D digital comb filter, DVI (digital visual interface) input,
picture-in-picture (PIP), and USB hub. The 3-D digital comb filter with deinterlacing provides the most accurate processing of composite video
signals for a sharper, cleaner picture. DVI ensures that digital signals remain uncompressed (in their true digital form) without the distortion that
may occur through analog-to-digital conversion. The PIP feature allows for simultaneous viewing of surveillance camera images and PC screens.
A USB hub provides a single input with three outputs adding to the overall flexibility of the high performance 400 Series.
The 400 Series provides two looping composite (BNC) inputs and outputs and one S-Video input and output. Additionally, these models provide
an analog VGA input to support the use of DVRs (digital video recorders) and PC applications. This multimode functionality—combined with the
high performance features, quick panel response time to minimize ghosting in motion video, ergonomic design, autoranging internal power
supply, and low power consumption—makes the 400 Series the optimal replacement for conventional CRT monitors.
The 400 Series features a folding picture frame-style desktop stand, optional rack mount kits, and VESA
adapt to any VESA-compliant wall mount.
These monitors automatically detect and display the correct video format (NTSC or PAL) and are powered by an internal autoranging power
supply.
The 400 Series uses four long-life CCFT (cold cathode florescent tube) backlights to maintain the brightness level over time, eliminating the
brightness degradation common in aging CRT monitors.
Adjustments of standard monitor display parameters are made using user-friendly, on-screen menus and front panel controls.
®
-compliant mounting holes to easily
MODELS
PMCL41515-inch (381 mm) active TFT LCD monitor
PMCL41717-inch (432 mm) active TFT LCD monitor
PMCL41919-inch (483 mm) active TFT LCD monitor
6C2927M-C (12/06)
PACKAGE CONTENTS
115-, 17-, or 19-inch TFT LCD monitor
1VGA cable with 15-pin, D-sub connector
1US standard power cable
1EU standard power cable
1DVI cable
1USB cable (Type A to B)
1Remote control unit
2AA batteries
1Installation/Operation manual
VGA CABLE WITH 15-PIN,
D-SUB CONNECTOR
INSTALLATION
OPERATION MANUAL
REMOTE CONTROL UNIT
TFT LCD MONITOR
2 AA BATTERIES
Figure 1. Parts List Illustration
USSTANDARD
POWER CABLE
EU STANDARD
POWER CABLE
DVI CABLE
USB CABLE (TYPE A TO B)
C2927M-C (12/06)7
Installation
The monitor can be placed on any flat surface (desk or table), or it can be rack mounted or wall mounted.
NOTE: Only use a recommended rack mount or wall mount kit, such as the PMCL-RM15, PMCL-RM17, PMCL-RM19, or PMCL-WM. To rackmount or wall-mount the monitor, follow the instructions supplied with the mount kit. Refer to manual C2220M for the rack mount kit instructions
or C2219M for the wall mount kit instructions.
DESKTOP STAND
You can manually adjust the 400 Series monitor to the viewing angle you want by repositioning the foot stand on the back of the monitor.
REAR PANEL CONNECTORS
2.0
S-VIDEO
OUT
IN
AUDIO-IN
LR
LR
AUDIO-OUT
VIDEO 1
IN
OUT
OUT IN
DC IN
AC IN
DC OUT
VGADVI
VIDEO 2
Figure 2. Rear Panel Connectors
8C2927M-C (12/06)
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.