H.264 BASED NETWORK VIDEO ENCODERS WITH VIDEO ANALYTICS
Product Features
• Pelco Analytics Included at No Charge
• Analytic Alarm Triggers
• PTZ from Web GUI, Including Presets and Patterns
• SNMP Support in Web GUI
• OSD On/Off from Web GUI
• Simplified User and Group Management Page in Web GUI
• Open Standards-Based Architecture
• H.264 Baseline, Main, or High Profile Compression
• Dual-Stream at up to 4CIF, 30/25 Images per Second (ips) per Stream
• Integrated Coaxitron® and Pelco D PTZ Protocols
• Power over Ethernet (PoE) Models (Compliant with IEEE 802.3af or
IEEE 802.3at)
• 1-, 2-, and 4-Channel Models
The
NET5400T Series
video encoder that integrates analog cameras and positioning systems
into an IP video surveillance system. The
deliver crystal clear images while drastically reducing the network
bandwidth and storage requirements for IP video surveillance
applications.
is a high performance, single- to multi-channel
NET5400T Series
encoders
Uncompromised Performance and Image Quality
The
NET5400T Series
video input into two streams, each up to 4CIF (704 x 480 for NTSC and
704 x 576 for PAL) and 30/25 ips. With individually configurable streams,
each channel of the
meet differing bandwidth, resolution, and frame rate requirements.
The high profile H.264 compression option delivers outstanding picture
quality at a drastically lower bandwidth. While H.264 compression
provides significant bit-rate savings over JPEG and MPEG-4
compression schemes, high profile H.264 enables sophisticated tools
that further reduce bit-rate while also improving picture quality under
certain scene conditions. The
baseline, main, and high profile H.264 compression to optimize the
cost of deploying IP video surveillance while improving image quality.
encoders are capable of compressing a single
NET5400T Series
encoder can be configured to
NET5400T Series
encoders provide
Powerful Intelligence at the Edge
The
NET5400T Series
the edge. With a dedicated analytics processing unit per channel, each
input can be independently configured to run multiple algorithms to
analyze frames of video in real time. Once configured, object and activity
encoders are enabled for video intelligence at
detection algorithms can interpret activity in the field of view and trigger
an alarm when unwanted activity is detected, thus making the
surveillance operator significantly more effective and efficient. The
ability to run analytic behaviors at the edge reduces network bandwidth
requirements in transmitting video to a central server. In addition,
edge-based analytics also allow for more graceful scalability as
centralized servers can introduce bottlenecks. Pelco is constantly
updating the available analytics libraries; contact a Pelco representative
for the latest available algorithms.
Integration for Installation Flexibility
The
NET5400T Series
form factors. The 1- and 2-channel models support PoE, minimizing the
amount of wiring needed. The 1- and 2-channel models also support
looping video output, allowing simple connections to other analog
components at the edge.
The dual network ports allow for daisy-chaining the units to reduce the
number of expensive network switch ports that would normally need
to be consumed by each encoder.
The optional wall mounts and rack mount provide convenient
installation of the 1- to 4-channel models. The RK5200 rack mount also
provides built-in cooling and an integrated, redundant power supply to
safeguard all encoder operations.
Integrated audio inputs for each video input can capture audio from
various sources and associate it with the video. One alarm for each
video input and one relay output for the encoder allows for I/O
communication with external components.
is available in a choice of 1-, 2-, or 4-channel
TECHNICAL SPECIFICATIONS
Built-in Analytics
®
The
Suites
video encoder. Models are preloaded and configured for the
Pelco Analytics Suite
included as standard features. Pelco behaviors can be configured and
enabled using a standard Web browser. The encoder is capable of
running up to three behaviors simultaneously for each associated
camera. No additional licensing or license activation is required. Some
models are also available preloaded with
NET5400T Series models provide full access to the entire Pelco
Analytics library for each channel. Up to three behaviors can be run
simultaneously per input. The
configure for alarm notification when used with Endura
OV Analytics Suites
notifications that are compatible with
Note:
compression standards, resolution, image rate, bit rate, and analytic
configuration.
Analytics Suite
Pelco
enhance the flexibility and performance of the NET5400T Series
Available processing power is determined by the settings for
Web Interface
The
NET5400T Series
remote setup and administration. Live video streams can be viewed
from an intuitive Web interface, and on-screen displays can be
accessed directly from the Web browser for additional camera
configuration. A simplified user and group management page makes
user setup even easier.
and
ObjectVideo® (OV) Analytics
. Eight Pelco behaviors are preloaded and
OV Analytic Suites.
Pelco Analytics Suite
offers rule configurations and alarm
OV Ready™ systems.
uses a standard Web browser for powerful
is easy to
•
Directional Motion:
when a person or object moves in the wrong direction, alerting
operators to a safety or security threat. Typical installations for
this behavior include an airport gate or tunnel where cameras
can detect objects moving in the opposite direction of the normal
flow of traffic.
•
Loitering Detection:
in a defined zone longer than the user-defined time allows. This
behavior is effective in real-time notification of suspicious
behavior around ATMs, stairwells, and school grounds.
•
Object Counting:
tripwire or enter a defined zone. This behavior can improve
business intelligence and operations by counting the number of
®
.
people at a store entrance or exit. It can also monitor foot traffic
inside a store to gauge areas of interest.
•
Object Removal:
a defined zone. This behavior is ideal for detecting the removal of
high value objects, such as a painting from a wall or a statue
from a pedestal.
•
Stopped Vehicle:
area longer than the user-defined time allows. This behavior is
ideal for airport curbside drop-offs, parking enforcement,
suspicious parking, traffic lane breakdowns, and vehicles waiting
at gates.
Generates an alarm in a high traffic area
Identifies when people or vehicles remain
Counts the number of objects that cross a
Triggers an alarm if an object is removed from
Detects vehicles stopped near a sensitive
ObjectVideo (OV) Analytics Suites
ObjectVideo Analytics Suites are preloaded on selected
Series
video encoders and require an OV Ready system to configure
the behaviors for alarm notification.
NET5400T
Pelco Analytics Suite
The Pelco Analytics Suite is configured with an Endura system, which
enables the behaviors to automatically detect and trigger alarms
when specific activity is detected. Multiple Pelco analytics can be
scheduled to work during a certain time or condition. For example,
during the day, a camera can be configured with Object Counting to
count the number of people that enter a lobby door. At the same time,
Camera Sabotage and Directional Motion can also be running to
detect any attempt at tampering with the camera or someone moving
in the wrong direction. Further, profiles can be created and scheduled
such that the behaviors on any given camera are changed throughout
the day or as a result of an alarm or event trigger. The Pelco Analytics
Suite includes the following behaviors:
•
Abandoned Object:
and triggers an alarm if the object remains in the zone longer
than the user-defined time allows. An airport terminal is a typical
installation for this behavior. Abandoned Object can also detect
objects left behind at an ATM, signaling possible card skimming.
•
Adaptive Motion:
and then triggers an alarm when the objects enter a defined
zone. Adaptive Motion is primarily used in outdoor environments
with light traffic to reduce the number of false alarms caused by
environmental changes.
•
Camera Sabotage:
field of view. If the lens is obstructed with spray paint, a cloth, or
covered with a lens cap, the behavior triggers an alarm. It also
triggers an alarm if there is any unauthorized movement of the
camera.
Detects objects placed in a defined zone
Detects and tracks objects that enter a scene
Detects contrast changes in the camera’s
OV Security Suite
The OV Security Suite is easy to use and includes Tripwire Detection,
Inside Area Detection, and Camera Tamper Detection behaviors.
• Tripwire Detection identifies objects that cross a user-defined
line drawn within the camera’s field of view.
• Inside Area Detection identifies objects entering, appearing, or
moving within a user-defined area.
• Camera Tamper Detection identifies significant contrast changes
in the camera’s field of view; for example, if the lens is
obstructed by spray paint, a cloth, or a lens cap.
OV Security Suite Plus
The OV Security Suite Plus includes the behaviors of the OV Security
Suite, plus Multi-Line Tripwire Detection, Loitering Detection, and
Leave Behind Detection behaviors.
• Multi-Line Tripwire Detection identifies objects that cross two
defined lines and generates an event based on defined
parameters, including directionality. Defined parameters for this
behavior include direction, sequential order, and time between
crossing each tripwire.
• Loitering Detection identifies when people or vehicles remain
within a defined area beyond a specified period of time. This
behavior is effective for real-time notification of suspicious
behavior around ATMs, stairwells, and school grounds.
• Leave Behind Detection detects objects placed in a defined zone
and triggers an alarm if the object remains in the zone longer
than the user defined time allows.
TECHNICAL SPECIFICATIONS
OV Event Counting Suite
The OV Event Counting Suite uses advanced object calibration and additional features for schedules, parameters, and multiple rules. The suite
includes behaviors for Tripwire Counting, Enters/Exits Counting, Loiter Counting, Occupancy Sensing, and Dwell-Time Monitoring.
• Tripwire Counting counts people or objects that cross a
user-defined line.
• Enters/Exits Counting calculates the number of people that enter
and exit an area without using a tripwire.
• Loiter Counting is useful in analyzing how frequently people stop
in front of a product, display, or other area of interest. This
feature is also useful in assessing promotion effectiveness and
product interest.
CAMERA
• Occupancy Sensing counts people and generates a new value
every time the occupancy level changes. Since each occupancy
output is time-stamped, the data can be used to determine
average occupancy levels or to correlate data to point-of-sale or
other business scenarios.
• Dwell-Time Monitoring rules can be set up to record the length of
time between when an object enters and then exits an area.
Along with queue size information, wait times can also be
assessed. This behavior can be used to evaluate consumer
interaction for a point-of-sale display or digital advertisement.
NET5400T
VIDEO
ANALYTICS OVERLAY
• CONFIGURATION
• ALARMS
• PELCO ANALYTICS API / OV READY
SYSTEM
IMPORTANT NOTE. PLEASE READ. The network implementation is shown as a general representation only and is not intended to show a detailed network
topology. Your actual network will differ, requiring changes or perhaps additional network equipment to accommodate the system as illustrated. Please contact
your local Pelco representative to discuss your specific requirements.
TECHNICAL SPECIFICATIONS
SYSTEM
Operating SystemLinux
User InterfaceIntegrated Web browser, requires Microsoft®
Media Player*Pelco Media Player or QuickTime® 7.6.5 for
*A media player is required to view video from a Web browser. Video
from any camera associated with the NET5400T Series can be
viewed from any Endura viewing station, such as the VCD5202 or
WS5200 software.
®
Internet Explorer® 8 or later; supported video
management system (VMS) user interfaces
Windows® XP, Windows Vista, or QuickTime
7.6.4 for Mac® OS X 1.4
VIDEO/AUDIO
Analog Video StandardsNTSC/PAL
Compression StandardsMJPEG and H.264 Baseline, Main, and High
Video Streams3 independently configurable per video
Analog Video ResolutionsNTSCPAL
4CIF704 x 480704 x 576
2CIF704 x 240704 x 288
CIF352 x 240352 x 288
Video Inputs1, 2, or 4 BNC inputs; 1 Vp-p; Hi-Z/75 ohms
Looping OutputsOn 1- and 2-channel models only
Audio EncodingG.711
Audio Bit-Rate64 kbps
Audio InputLine-in, 3.5 mm connector
Audio OutputLine-out on 1- and 2-channel models only
profiles
channel; up to 2 unicast streams; unlimited
multicast streams
PowerBlue Pelco badge
StatusGreen, amber, red (based on diagnostics)
Ethernet Port 1Green, amber, red
Ethernet Port 2Green, amber, red
Video InputsGreen, red, off
ANALYTICS
Required Systems for
Pelco Analytics Suite
Open API Pelco analytics streaming information
communicate through Pelco’s API Guide for
Video Analytics version 0.55.30 (or later),
available at
Pelco.com/IP.
TECHNICAL SPECIFICATIONS
POWER
Power Input
1-ChannelPoE (IEEE 802.3af 2003), 12 VDC or 24 VAC
2-ChannelPoE+ (IEEE 802.3at), 12 VDC or 24 VAC ±10%;
4-Channel12 VDC ±10%; power supply sold separately
Power Supply
1- and 2-Channel Units4-pin connection to external power supply
4-Channel Units4-pin connection to external power supply
±10%; power supply sold separately
power supply sold separately
or PoE
ENVIRONMENTAL
Operating Temperature
1- and 2-Channel Units0° to 45°C (32° to 113°F)
4-Channel Units5° to 35°C (41° to 95°F)
Storage Temperature–40° to 65°C (–40° to 149°F)
Operating Humidity20% to 80%, noncondensing
Max. Humidity Gradient 10% per hour
Operating Altitude–16 to 3,048 m (–50 to 10,000 ft)
Operating Vibration0.25 G at 3 Hz to 200 Hz at a sweep rate of
Note:
The temperature at the unit air intake can be significantly higher than
room temperature. Temperature is affected by rack configuration, floor
layout, air conditioning strategy, and other issues. To prevent unit damage,
make sure the temperature at the air intake of the unit is continuously within
the operating temperature range.
0.5 octave/minute
PHYSICAL
ConstructionSheet metal
FinishGray metallic with black end caps, black
matte finish
Dimensions26.5 x 16.4 x 2.7 cm
(10.43" D x 6.55" W x 1.08" H)
Mounting
DesktopRubber feet provided
Wall or RackOptional mounting accessories required
Unit Weight0.9 kg (2.0 lb)
Shipping Weight2.3 kg (5.0 lb)
TECHNICAL SPECIFICATIONS
MODELS
Use the following table to create a model number to specify your
NET5400T Series encoder. For example, the model number for a 2-channel
encoder with the OV Security Suite is NET5402T-OS.
Note:
Order power supply separately. See
available models.
ModelDescription
NET540xT1-, 2-, or 4-channel H.264 encoder with built-in
Pelco Standard Suite
NET540xT-OS1-, 2-, or 4-channel H.264 encoder with built-in
OV Security Suite
NET540xT-OSP 1-, 2-, or 4-channel H.264 encoder with built-in
OV Security Suite Plus
NET540x-T-OCP 1-, 2-, or 4-channel H.264 encoder with built-in
OV Event Counting Suite
Optional Accessories
below for
OPTIONAL ACCESSORIES
WM5200-4UWall mount for single unit (no power supply)
Use the following table to create a model number to specify your power
supply and regional power cord. For example, the model number for a
single-module power supply with a European Union regional power cord is
NET5400PS-EU.
Note:
Power cords are not included for units shipped to China.
CERTIFICATIONS
• CE, Class A
• FCC, Class A
• UL/cUL Listed
• C-Tick
• CCC
• KCC
STANDARDS/ORGANIZATIONS
• Pelco is a member of the MPEG-4 Industry Forum.
• Pelco is a member of the Universal Plug and Play (UPnP) Forum.
• Pelco is a member of the Universal Serial Bus (USB) Implementers Forum.
• Pelco is a contributor to the International Standards for Organization/
Electrotechnical Commission (ISO/IEC) Joint Technical Committee 1
(JTC1), “Information Technology,” Subcommittee 29, Working Group 11.
• Compliant with ISO/IEC 14496 standard (also known as MPEG-4).
• Compliant with International Telecommunication Union (ITU)
Recommendation G.711, “Pulse Code Modulations (PCM) of Voice
Frequencies.”
ModelDescriptionCountry Code
RK5200PS-5URack mount with redundant
power supply for 12 units
NET5400PSSingle-module power supply
(12 VDC, 5 A, 60 W)
AR = Argentina
AU = Australia
CN = China
EU = European Union
UK = United Kingdom
US = United States
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.