Pelco NET5308T-EXP Specsheet

PRODUCT SPECIFICATION

UP TO 8

NET5308T-EXP

NET5308T

VIDEO INPUT

BASE MODULE

GIGABIT SWITCH

NVR5100

SM5000

WS5000

IMPORTANT NOTE: PLEASE READ. The network implementation is shown as a general representation only and is not intended to show a detailed network topology. Your actual network will differ, requiring changes or perhaps additional network equipment to accommodate the system as illustrated. Please contact your local Pelco Representative to discuss your speciﬁc requirements.

network video solutions

NET5308T Video Encoder

8 INPUTS, EXPANDABLE TO 16 INPUTS, DUAL-STREAM, NTSC/PAL

Product Features

• 8 Video Inputs, Expandable to 16 Video Inputs

• Dual MPEG-4 Video Streams per Input

• Up to 30 High Quality (4CIF) Images per Second per Stream

• Unicast and multicast transmission supports simultaneous viewing

on multiple workstations and uninterrupted recording

• Adaptive Deinterlacing Technology

• 8 Programmable Alarm Inputs (Supervised or Unsupervised), 4 Relay

Outputs, Expandable to 16 Alarm Inputs and 8 Relay Outputs

• 2 Security Modes

• Built-in PTZ Support using Pelco P or Pelco D (RS-422) and

Coaxitron

(Up-the-Coax) Protocols

(INCLUDES 8 INPUTS AND BASE MODULE)

NET5308T

The

NET5308T

is a high performance, dual-stream, eight-input video encoding unit. Its main function is to convert live analog video signals into dual MPEG-4 streams. It can process up to 30 high quality images per second (ips) per stream. In addition, the

NET5308T

uses motion adaptive deinterlacing technology to reduce

jitter in 4CIF images.

The

NET5308T

incorporates EnduraView

™

video optimization technology to select the best image quality and frame rate for the target Endura® product (decoder, workstation, console), all without affecting the system recording rate.

The

NET5308T

offers both unsecured and secured modes. The secure mode uses a key system to prevent unauthorized devices from communicating with a

NET5308T

over the Endura network. The system also supports both multicast and unicast transmission to optimize network usage for the given application.

The

NET5308T

ﬂexibility. The for easy expansion to 16 video inputs on the same network port. With its USB 2.0 technology, you can expand the

is also designed for maximum system integration and

NET5308T-EXP

adds 8 video inputs to the

NET5308T

without

redesigning your network.

With integrated audio and PTZ control, the NET5300 Series of encoders provides the ideal solution for moving large groups of analog cameras onto the Endura IP video surveillance system.

Endura distributed, network-based products are available only to certiﬁed dealers/ integrators. Please contact your local sales representative for details on certiﬁcation applications and requirements. Additional information on Endura products and certiﬁcations may be found at http://www.pelco.com/endura

(OPTIONAL 8 INPUT EXPANSION UNIT)

NET5308T-EXP

NOTICE: Judgment as to the suitability of the products for users’ purposes is solely the users’ responsibility. Users should refer to the Operation manuals for cautionary statements regarding user selected options and how they might affect video quality. Users shall determine the suitability of the products for their own intended application, picture rate and picture quality. In the event users intend to use the video for evidentiary purposes in a judicial proceeding or otherwise, users should consult with their attorney regarding any particular requirements for such use.

C2614 / REVISED 6-11-08

VS I

REQUIRED

International Standards

Organization Registered Firm;

ISO 9001 Quality System

TECHNICAL SPECIFICATIONS

MODEL NUMBERS

NET5308T 1 base module and 1 video input module;

NET5308T-EXP Encodes an additional 8 video inputs, 8 audio

encodes 8 video inputs, 8 audio inputs, and control data for transmission over an IP network; includes 8 alarm inputs and 4 relay outputs

inputs, and control data for transmission and integration with the NET5308T; adds 8 alarm inputs and 4 relay outputs

SUPPLIED ACCESSORIES

NET5308T 6 power cables (2 USA standard, 2 European

NET5308T-EXP 3 power cables (1 USA standard, 1 European

standard, 2 UK standard) 1 USB 2.0 cable 2 alarm and 2 relay terminal blocks Serial PTZ kit (1 straight cable, 1 reverse cable, 1 breakout box)

standard, 1 UK standard) 1 USB 2.0 cable 2 alarm and 2 relay terminal blocks

VIDEO/AUDIO

Video Standards NTSC/PAL/EIA/CCIR composite Video Coding MPEG-4 Video Streams 2, simultaneous per input Video Resolutions NTSC

4CIF 704 x 480 704 x 576 2CIF 704 x 240 704 x 288 CIF 352 x 240 352 x 288 QCIF 176 X 120 176 X 144

Video Inputs

(Video/Expansion) 8, BNC, looping, 0.5-1 Vp-p

Video Termination Software controlled Video Sequence Output

(Video/Expansion) 1, BNC, 1 Vp-p

Audio Encoding G.711 speech codec Audio Bit Rate 64 kbps Audio Levels 1 Vp-p, 10 kohms Audio Connectors 8, 3.5 mm monaural

Connector Tip Signal high Connector Sleeve Common

Audio Inputs Line in

PAL

PTZ CONTROL

PTZ Interface RS-422, Video in PTZ Protocols Coaxitron (video/expansion)

Pelco D/Pelco P (base)

ALARMS/RELAYS

Alarm Inputs 8, programmable, 5.0 VDC 10 kohms,

Relay Output 4, form-C relay, 30 VDC, 1 A; expandable to 8

triggered; expandable to 16

VIDEO ACTIVITY DETECTION

Zones 3 plus background zone Zone Types Any shape, user-deﬁnable in 16 x 16 pixel

Sensitivity Adjustable

blocks

POWER

Power Input 100-240 VAC 50/60 Hz, autoranging Power Consumption

(maximum) 40 W, 137 BTU/H (each module)

AUXILIARY INTERFACES

Base Module

Network Connector 1 Gigabit Ethernet RJ-45 port (1000Base-T) USB 2.0 3 high-speed USB 2.0 ports on rear panel Camera Control 1 RJ-45 connector; RS-422 to CM9760-CDU-T;

Pelco D/Pelco P protocol

Video/Expansion

Alarms 2, 8-pin terminal block Relays 2, 6-pin terminal block

FRONT PANEL INDICATORS/FUNCTIONS

Base Module

Power Blue Status Green, amber, red Network Link/Speed Green, amber Network Activity Green Video Green, red

Video/Expansion

Power Blue Video status Red Video operation Green Unit Status Green, amber, red

ENVIRONMENTAL

Operating Temperature 50°F to 95°F (10° to 35°C) at unit air intake

Storage Temperature -40° to 149°F (-40° to 65°C) Operating Humidity 20% to 80%, noncondensing Maximum Humidity Gradient 10% per hour Operating Altitude -50 ft to 10,000 ft (-15.2 m to 3,048 m) Operating Vibration 0.25 G at 3 Hz to 200 Hz at a sweep rate of

NOTE:

The temperature at the unit air intake can be signiﬁcantly higher than room temperature. Temperature is affected by rack conﬁguration, ﬂoor layout, air conditioning strategy, and other issues. To prevent performance failure and unit damage, make sure the temperature at the unit is continuously within the operating temperature range.

(front of unit)

0.5 octave/minute

PHYSICAL

Construction Steel cabinet Finish

Bezel Gray metallic with black end caps Chassis Black matte ﬁnish

Dimensions

NET5308T 16.7" D x 17.0" W x 3.4" H

NET5308T-EXP 16.7" D x 17.0" W x 1.7" H

Mounting

NET5308T Desktop (feet) or Rack* (2 RU per set) NET5308T-EXP Rack* (1 RU)

Weight Unit Shipping

NET5308T 26.7 lb (12.1 kg) 40 lb 18.1 kg) NET5308T-EXP 13.4 lb (6.1 kg) 20 lb (9.1 kg)

(42.4 x 43.2 x 8.6 cm)

(42.4 x 43.2 x 4.3 cm)

*Rack ears and screws provided

CERTIFICATIONS

• CE, Class A; meets EN50130-4 standard requirements

• FCC, Class A

• UL/cUL Listed

OPTIONAL MOUNTING ACCESSORIES

WM5300 Vertical wall mount kit for one NET5308T set

and one NET5308T-EXP unit

Pelco, Inc. Worldwide Headquarters:

3500 Pelco Way, Clovis, California 93612-5699 USA

USA & Canada International www.pelco.com

Tel: (800) 289-9100 • FAX: (800) 289-9150

Tel: +1 (559) 292-1981 • FAX: +1 (559) 348-1120

Pelco, the Pelco logo, Endura, the Endura logo, and Coaxitron are registered trademarks of Pelco, Inc.

Product speciﬁcations and availability subject to change without notice.

EnduraView is a trademark of Pelco, Inc.