Pelco NET104A Specsheet

PRODUCT SPECIFICATION

®

PelcoNet™ NET104A Series

MULTIMEDIA TRANSMISSION VIA NETWORKS

Product Features

• Send and Receive Live Video, Audio, and Data Over

Ethernet Networks

• Four Video Channels to Display/Transmit Single or Quad

Views; Also Sequences Images

• Four Alarm Inputs for External Detectors

• Relay Output for Switching External Devices (such as a door

lock, etc.)

• View the Picture on a PC or CCTV Monitor

• Control a PTZ, Genex

Building or Across the Country

• Autonomous System Does Not Require a PC to Transmit

• Uses TCP/IP Protocol

• Multicast Function Allows Simultaneous Connection of

Multiple Receivers, Including up to Five Viewers of Live Video

• Up to 30 High Quality Images Per Second

• Manually Record and Play Back Camera on a PC’s Hard

Drive

• Select Specific Areas in the Display for Motion Detection

®

Multiplexer, or Matrix Within a

NET104A TRANSMITTER (FRONT)

NET104A TRANSMITTER (REAR)

• Automatically Transmit Alarm E-Mail with Attached

Image

• Password Protection Against Unauthorized Access

DIGITAL NETWORK

SYSTEMS

The PelcoNet™ NET104A Transmission System
transmits live video, data, and audio across existing
Ethernet networks. Sending video and audio over
computer networks yields significant cost savings by
using an existing computer network to monitor a remote
site. PelcoNet NET104A saves installation costs (no
separate cabling required), allows toll-free operation
(intranets), and saves management costs (single, uniform
network).

PelcoNet NET104A has four channels, so it works
with up to four video sources. It can multiplex to provide
a single view, sequence of views, or a quad view.

With minimal setup, the PelcoNet NET104A
Transmission System can be installed and running in
minutes. Connect cameras to the transmitter and a
monitor to a standard PelcoNet NET101 Series
receiver. Then connect the transmitter and receiver to the
network and configure IP addresses for the equipment
using a standard terminal program or any Internet
browser.

If you need to control a camera (operate pan, tilt,
and lens functions, or do presets and patterns), an
RS-232 data interface links the keyboard controls to
the network and then from the network to the
camera system.

Instead of a PelcoNet NET101Series receiver
and monitor, an Internet browser can be used at the
receiving end to display video on a PC. On-screen
keyboards in PelcoNet NET104A let you control
the following devices over the network: System

®

9760

/9740 or CM6700/CM6800 matrix

controller, Genex

™

Esprit

positioning systems. You can also record live

®

multiplexer, Spectra® domes, and

video on the viewing computer’s hard drive and
play it back.

PelcoNet NET104A now gives you a new choice
of using computer networks to interface your control
and monitoring stations with remote camera sites,
whether they be in the same building, across the
country, or around the world.

PELCONET

International Standards Organization Registered Firm ISO 9001 Quality System

DataFAX Documents SPEC: 22900 MANUAL: Not Available through DataFAX

(Product specifications and manuals also available through Pelco Online at www.pelco.com)

C2900/NEW 2-02

317

TECHNICAL SPECIFICATIONS

®

SYSTEMS

DIGITAL NETWORK

PELCONET

MODEL

NET104A Four-channel video transmitter with bi-

directional audio and integrated
Ethernet connection.

Note: For countries other than the United States, you must also

specify the appropriate transformer adapter when ordering.
Please refer to the list below. (Adapter will be sent at no
charge.)

NETPLUG4-AU Transformer adapter, Australian.
NETPLUG4-EU Transformer adapter, European.
NETPLUG4-UK Transformer adapter, United Kingdom.
NETRANS4 Replacement transformer, 100-240 VAC.

NETWORK PROTOCOL AND
STANDARDS COMPATIBILITY

Internet Configuration IP, TCP, UDP, ICMP, ARP, DHCP, HTTP,

FTP, IGMP

Video Coding H.261/263, H.323 (M-JPEG in Server

Push mode only), G.711

Video Frame Rate Up to 30 images/second

INTERFACES

Video Input (transmitter) 4 BNC, PAL/NTSC, 75 ohms, 1 Vp-p,

RS-170, CCIR-601
Video Output (NET101R
or NET101R-A receiver) 1 BNC, PAL/NTSC, 75 ohms, 1 Vp-p
Audio Input RCA phono jack, -32 dBm0 variable
Audio Output RCA phono jack, -10 to 0 dBm0,

600 ohms
LAN Interface UTP (10/100BaseT auto-sensing), RJ-45
LAN Data Rate 10 Kbps up to 1 Mbps
Data Interface 1 RS-232C/RS-422/RS-485,

bi-directional (Sub-D9 pin)
Alarm Inputs 4 terminals for direct connection of

controls, 1 master alarm input
Alarm Output 4 relays, maximum 40V, 0.8A

Server

VIDEO

Video Standards PAL, NTSC
Video Resolution 704 x 576 pixels (HiRes)

352 x 288 pixels (CIF)

POWER ADAPTER

Type Plug power adapter
Input Voltage 100-240 VAC, 50/60 Hz
Output Voltage 12 VAC, 800 mA
Country-Specific Adapters US (default), Australia, Europe, and

UK. (Specify when ordering.)

MISCELLANEOUS

LED Displays 17 LEDs (video, inputs, outputs,

Ethernet, connection, power)

ENVIRONMENTAL

Operating Temperature 41° to 104°F (5° to 40°C)
Operating Humidity 80% maximum relative humidity,

non-condensing

Storage Temperature -4° to 140°F (-20° to 60°C)
Storage Humidity 95% maximum relative humidity,

non-condensing

GENERAL

Dimensions 1.4" H x 10.2" W x 6.5" D

(3.5 x 26.0 x 16.5 cm)
Unit Weight 2.8 lb (1.3 kg), without power supply
Shipping Weight 5 lb (2.27 kg), with power supply

CERTIFICATIONS

◆ CE, Class A

◆ UL Listed

◆ UL Listed to Canadian safety standards

◆ FCC, Class B

OPTIONAL ACCESSORIES

NET101R Single-channel video receiver with

integrated Ethernet connection.
NET101R-A Single-channel video receiver with

bi-directional audio and integrated

Ethernet connection.

318

Audio

Hub

PelcoNet

Optional

Audio

Data

Receiver

Monitor

Cameras

Sample Configuration Using a Local Area Network (LAN)

Genex®, System 9760®, and Spectra® are registered trademarks of Pelco.

Pelco • 3500 Pelco Way • Clovis, CA 93612-5699 • Pelco Online @ www. pelco.com
In the US and Canada: Tel [phone] • FAX [phone] • DataFAX [phone]
International Customers: Tel [phone] • FAX [phone] • DataFAX [phone]

Data

Net104A

Transmitter

Network

PelcoNet™ and Esprit™ are trademarks of Pelco.

Specifications subject to change without notice.

©Copyright 2002, Pelco. All rights reserved.