Pelco MS512DT, MS508DT Specsheet

PRODUCT SPECIFICATION

MS500 Series Switcher

MANUAL, VIDEO

Product Features

• Economical

• 4, 8, 12, 18, or 40 Inputs

• Terminating or Looping

• Desktop or Rack Mount

• Compatible with Color or B-W Composite Video Signals

• Single Monitor Output (Except 40-Position Switcher Which Has Two

Monitor Outputs)

• 120 VAC Input Models Only

control site

MS504DT

The MS500 Series of manual, passive switchers provide an ical means of switching 4, 8, 12, 18, or 40 inputs to a single monitor. The interlocked manual push-button switches provide 75-ohm at each switch.

The

MS500L Series

functions as the MS500 manual switchers except no termination is used and connectors are provided so that the video inputs may be looped through and terminated elsewhere.

Pelco has engineered a unique method of selecting over 18 inputs. By inter-wiring two sets of switches (4-position and 10-position), you can economically and reliably switch up to 40 inputs in only

1.75 inches (4.45 cm) of panel height on most models.

All switchers are desktop models. Optional rack mounting kits are available.

Audio follow options of single (AF) or balanced (BAF) audio are available for up to 18 positions. AF switchers are equipped with SPST, normally open switch closures for each position; BAF switchers have DPDT, normally open switch closures for each position.

of manual, looping switchers provide the same

econom-

termination

DataFAX

SPEC: 2820 MANUAL: 28206

C820 / REVISED 10-01

International Organization

for Standardization;

Registered ISO 9001

TECHNICAL SPECIFICATIONS

MODELS

MS504DT Manual switcher, 4 inputs, terminating MS508DT Manual switcher, 8 inputs, terminating MS512DT Manual switcher, 12 inputs, terminating MS518DT Manual switcher, 18 inputs, terminating MS504GDT Manual switcher, 4 inputs, illuminated

buttons MS508GDT Same as MS504GDT, 8 inputs MS512GDT Same as MS504GDT, 12 inputs MS518GDT Same as MS504GDT, 18 inputs MS504LDT Manual switcher, 4 inputs, looping MS508LDT Manual switcher, 8 inputs, looping MS512LDT Manual switcher, 12 inputs, looping MS518LDT Manual switcher, 18 inputs, looping MS540LDT Manual switcher, 40 inputs, looping MS504GLDT Manual switcher, 4 inputs, illuminated

buttons, looping MS508GLDT Same as MS504GLDT, 8 inputs MS512GLDT Same as MS504GLDT, 12 inputs MS518GLDT Same as MS504GLDT, 18 inputs MS504AF Manual switcher, 4 inputs, terminating with

audio follow MS508AF Manual switcher, 8 inputs, terminating with

audio follow MS512AF Manual switcher, 12 inputs, terminating with

audio follow MS518AF Manual switcher, 18 inputs, terminating with

audio follow MS504AFL Manual switcher, 4 inputs, looping, with

audio follow MS508AFL Manual switcher, 8 inputs, looping, with

audio follow MS512AFL Manual switcher, 12 inputs, looping, with

audio follow MS504BAF Manual switcher, 4 inputs, terminating with

balanced audio follow MS508BAF Manual switcher, 8 inputs, terminating with

balanced audio follow MS512BAF Manual switcher, 12 inputs, terminating with

balanced audio follow MS504BAFL Manual switcher, 4 inputs, looping with

balanced audio follow MS508BAFL Manual switcher, 8 inputs, looping with

balanced audio follow MS512BAFL Manual switcher, 12 inputs, looping with

balanced audio follow

VIDEO

Inputs 4, 8, 12, 18, or 40 as indicated by the last two

digits of the model number Video Connectors BNC Audio Connectors

AF Switchers 1/8-inch RF phono jack BAF Switchers Terminal block

Termination

Terminated or Non-looping Models Input – 75-ohm internal termination

Output – 75-ohm source termination

Looping Models Input – High impedance looping

Output – High impedance looping

ELECTRICAL

(Models MS500GDT, MS500GLDT, and MS540LDT)

Input Voltage 120 VAC, 50/60 Hz Power Requirements 0.095 amp (11 VA) Fuse 3 AG 1/16 ASB Power Cord 3-wire grounded, 18 AWG

(Model MS540LDT only)

Output Ampliﬁer One ampliﬁed output and one non-ampliﬁed

Gain Unity Frequency Response Flat within ±1 dB to 10 MHz Maximum Signal Level 2 Vp-p

output for use with MPT9000CZ/MPT9000PZ or KBD9000

GENERAL

Switching Interlocked manual push buttons Construction

Cover Steel, black polyester powder coat Chassis Steel, zinc plated

Panel Aluminum, black polyester powder coat Environment 32° to 120°F (0° to 49°C) Dimensions/Weight As noted below (weights approximate)

MS504AF, MS504DT,



MS504GDT, MS504GLDT, MS504LDT

MS504AFL, MS504 BAF,



MS504BAFL, MS508AF, MS508BAF, MS508BAFL, MS508DT, MS508GDT, MS508GLDT, MS508LDT,

MS508AFL, MS512AF,



MS512AFL, MS512BAF,, MS512GDT, MS512GLDT, MS512LDT, MS518AF, MS518DT, MS518GDT, MS518GLDT



MS540LDT 3.50" H x 17.12" W x 9.30" L

1.75" H x 5.3" W x 9.3" D (4.45 x 13.46 x 23.62 cm) Unit Weight: 3 lb (1.35 kg) Shipping Weight: 4 lb (1.81 kg)

1.75" H x 14.3" W x 9.3" D (4.45 x 36.32 x 23.62 cm) Unit Weight: 6 lb (2.71 kg) Shipping Weight: 8 lb (3.62 kg)

1.75" H x 17.12" W x 9.30" L (4.45 x 43.48 x 23.62 cm) Unit Weight: 7 lb (3.17 kg) Shipping Weight: 9 lb (4.07 kg)

(8.89 x 43.48 x 23.62 cm) Unit Weight: 9 lb (4.07 kg) Shipping Weight: 11 lb (4.98 kg)

CERTIFICATIONS/RATINGS

• UL Listed

• Meets NEMA Type 1 standards

OPTIONAL ACCESSORIES

DT200 Dual desktop mount kit; two units can be

R300 Rack mount kit for up to three switchers.

RKS10 Rack mount kit for single switcher. 1 RU. Use

RKS20 Rack mount kit for single switcher. 1 RU. Use

RKS40 Rack mount kit for single switcher. 2 RUs. Use

mounted side-by-side in one desktop chassis. Use with

(Factory racking available for R300 rack kits only.) 1 RU. Use with

with







above.



above.



above.

Pelco Worldwide Headquarters:

3500 Pelco Way, Clovis, California 93612-5699 USA

USA & Canada Tel: (800) 289-9100 • FAX (800) 289-9150 • DataFAX (800) 289-9108 International Tel: (559) 292-1981 • FAX (559) 348-1120 • DataFAX (559) 292-0435

www.pelco.com

Speciﬁcations subject to change without notice.