Pelco MM1000 Specsheet
PRODUCT SPECIFICATION
MM1000 Mount
WALL, MONITOR
monitor solutions
Product Features
• Low Cost
• Supports up to 40 lb (18 kg)
• Designed for 9-Inch (22.86 cm) and 12-Inch (30.48 cm) CCTV
Monitors
• Universal Monitor or Wall Mounting
• Attractive, Unobtrusive Design
• Lightweight for Fast, Easy Installation
The
MM1000
is a universal monitor mount constructed from
aluminum and capable of supporting a 9-inch (22.86 cm) or 12-inch
(30.48 cm) monitor weighing up to 40 pounds (18 kg). The
MM1000
mounts to a wall or vertical surface.
The universal mounting head allows the
MM1000
to adapt to most
9-inch (22.86 cm) or 12-inch (30.48 cm) CCTV monitors. Support pan
extension brackets are provided to accommodate monitors with
slightly different hole patterns or rubber feet. Horizontal and vertical
adjustments allow you to position the monitor.
In addition, the
MM1000
can be adapted for mounting on a pole
when used with the PA101 pole mount. A 3-inch (7.62 cm) to 8-inch
(20.32 cm) diameter pole is required.
MM1000
10.50
(26.67)
0.28 (0.71) X 1.00 (2.54)
SLOT THRU TYP
11.00
2.75
(6.98)
Ø0.343 (0.87)
1X
Ø0.28 (0.71)
3X
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS; ALL OTHERS ARE INCHES.
1.50 (3.81)
2.86
(7.26)
0.63 (1.60)
1.25 (3.17)
3.48
(8.83)
4.73
(12.01)
MM1000
9.72
(24.68)
15.22
38.55
(27.94)
3.00
(7.62)
C242 / REVISED 6-09-08
International Standards
Organization Registered Firm;
ISO 9001 Quality System
TECHNICAL SPECIFICATIONS
MODEL
MM1000 Wall mount for 9-inch (22.86 cm) and 12-inch
MECHANICAL
Pan Adjustment Unlimited 360°
Tilt Adjustment +10°, -90°
Monitor Mounting Multiple slotted holes in monitor support pan
Locking Method 3/8-16 Allen bolts
Mounting Method Secure to wall or horizontal surface as noted:
MM1000 3, 1/4-20 fasteners or one 1/4-inch diameter
GENERAL
Construction Aluminum
Finish Gray polyester powder coat
Maximum Load 40 lb (18 kg)
Unit Weight
MM1000 2.76 lb (1.25 kg)
PA101 0.88 lb (0.40 kg)
Shipping Weight
MM1000 4 lb (1.81 kg)
PA101 2 lb (0.90 kg)
(30.48 cm) CCTV monitors
(4 mounting screws required, not supplied)
and one 5/16-inch diameter fastener for
center mount holes in applications where wall
studs are encountered
CERTIFICATIONS
• UL Listed
OPTIONAL MOUNT ADAPTERS
PA101 Pole mount adapter for MM1000.
Fits poles with 3-inch (7.62 cm) to 8-inch
(20.32 cm) diameters. Stainless steel
mounting straps supplied
PA101
Pelco, Inc. Worldwide Headquarters:
3500 Pelco Way, Clovis, California 93612-5699 USA
USA & Canada
International
www.pelco.com
Tel: (800) 289-9100 • FAX: (800) 289-9150
Tel: +1 (559) 292-1981 • FAX: +1 (559) 348-1120
Pelco and the Pelco logo are registered trademarks of Pelco, Inc.
Product specifications and availability subject to change without notice.
©Copyright 2008, Pelco, Inc. All rights reserved.
Loading...