Pelco MLZ6DT Specsheet
PRODUCT SPECIFICATION
MLZ6DT Control
ZOOM LENS, MOTORIZED
matrix systems and controls
Product Features
• Solid-State Electronics
• 120 VAC Input
• Supplied with 24 VAC Wall Transformer
• For Use with Motorized Zoom Lenses
• Ideal for Simple, Hard-Wire Control Applications
The
MLZ6DT
lens control is designed to provide remote control for
Pelco’s motorized zoom lenses. Fully solid-state electronics provide
the DC power to smoothly drive zoom, focus, and iris functions.
The
MLZ6DT
is supplied with a 24 VAC wall mount transformer
power supply. Front panel switches provide control of zoom and
focus functions, with optional manual control of the iris. Speed is
adjustable through the front panel knob control.
The
MLZ6DT
is ideal for simple video surveillance applications
(single camera and monitor).
MANUAL
5.50
(13.97)
ZOOM
FOCUS
IRIS
TELE
NEAR
OPEN
SPEED
OUTPUT
1.75
(4.45)
AC INPUT
ON
AUTO
WIDE
FAR CLOSE
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;
ALL OTHERS ARE INCHES.
8.90
(22.61)
C516 / REVISED 5-20-08
International Standards
Organization Registered Firm;
ISO 9001 Quality System
TECHNICAL SPECIFICATIONS
MODELS
MLZ6DT Desktop zoom lens control module with auto/
manual iris control
CONTROLS
Zoom Paddle switch TELE/WIDE
Focus Paddle switch NEAR/F
Manual Iris Paddle switch OPEN/CLOSE
Auto Iris Paddle switch AUTO/MANUAL
Speed Knob adjustment
On/Off Rocker switch
Pilot Lamp Light emitting diode (LED)
AR
ELECTRICAL
Input Voltage 120 VAC, 50/60 Hz
Power Consumption 3 to 6 watts
Output V
oltage ±2 to 12 VDC
Circuit Full wave power supply with solid-state drive
Power Supply 24 VAC, 400 mA wall mount transformer
Output Connector AMP CPC type, 14 pin (mate supplied)
Cable Requirements Four conductors plus ground; one additional
Cable Distances The following distances are approximate
conductor for manual override
maximum recommended under the following
conditions:
– Based on a 35 mA load at 9 VDC
– Single lens function activation
– Single common conductor in lens cable
– 10% loss in voltage at the lens motor
2
22 AWG (0.3 mm
20 AWG (0.5 mm2) 1,267 ft (386 m)
18 AWG (1.0 mm2) 2,015 ft (614 m)
) 797 ft (243 m)
CERTIFICATIONS/RATINGS
• UL Listed
•
Meets NEMA Type 1 standard
s
OPTIONAL ACCESSORIES
R300 Rack mount kit (1 RU) for up to three control
modules.
Note:
Video is limited to 500 feet on RG59/U coax cable without equalization
amplifier.
GENERAL
Construction
Cover Steel, black polyester powder coat
Chassis Steel, zinc plated
Panel Aluminum, black polyester powder coat with
Unit Weight 3 lb (1.35 kg)
Shipping Weight 5 lb (2.25 kg)
Pelco, Inc. Worldwide Headquarters:
3500 Pelco Way, Clovis, California 93612-5699 USA
USA & Canada
International
www.pelco.com
white silkscreen
Tel: (800) 289-9100 • FAX (800) 289-9150
Tel: +1 (559) 292-1981 • FAX +1 (559) 348-1120
Pelco and the Pelco logo are registered trademarks of Pelco, Inc.
Product specifications and availability subject to change without notice
©Copyright 2008, Pelco, Inc. All rights reserved.
Loading...