®
MCC5600
Series CCD
Monochrome Camera
Installation/
Operation Manual
C1926M (3/99)
Pelco • 3500 Pelco Way • Clovis, CA 93612-5699 USA • www.pelco.com
In North America and Canada: Tel (800) 289-9100 or FAX (800) 289-9150
International Customers: Tel (1-559) 292-1981 or FAX (1-559) 348-1120
CONTENTS
Section Page
IMPORTANT SAFEGUARDS AND WARNINGS................................................................3
DESCRIPTION...................................................................................................................3
MODELS ....................................................................................................................3
LOCATION OF PARTS AND CONTROLS .........................................................................4
INSTALLATION .................................................................................................................. 5
CAMERA MOUNTING ...............................................................................................5
POWER REQUIREMENTS........................................................................................6
POWER AND VIDEO CONNECTIONS .............................................................6
LENS INSTALLATION................................................................................................7
GENERAL LENS INFORMATION......................................................................7
LENS MOUNTING .............................................................................................8
AUTO-IRIS LENSES..........................................................................................8
BACK-FOCUS ADJUSTMENT ..........................................................................8
CAMERA SYNCHRONIZATION AND V-PHASE .......................................................9
V-PHASE ADJUSTMENT ..................................................................................9
TROUBLESHOOTING ......................................................................................................10
MAINTENANCE ................................................................................................................10
SPECIFICA TIONS.............................................................................................................11
WARRANTY AND RETURN INFORMATION....................................................................12
LIST OF ILLUSTRATIONS
Figure Page
1 Location of Parts and Controls (Front and Rear) ...............................................4
2 Camera Mounting Screw ...................................................................................5
3 CA1750 Mount Adapter......................................................................................5
4 C-mount Lens with C/CS-Mount Adapter........................................................... 7
LIST OF TABLES
Table Page
A Video Coaxial Cable Requirements ...................................................................6
2 Pelco Manual C1926M (3/99)
IMPORTANT SAFEGUARDS AND WARNINGS
Prior to installation and use of this product, the following WARNINGS should be observed.
1. Installation and servicing should only be done by qualified service and installation
personnel.
2. Installation shall be done in accordance with all local and national electrical and
mechanical codes utilizing only approved materials.
3. Use only installation methods and materials capable of supporting four times the
maximum specified load.
The product may bear the following marks:
This symbol indicates that dangerous voltage
constituting a risk of electric shock is present
within this unit.
This symbol indicates that there are important
operating and maintenance instructions in the
literature accompanying this unit.
Please thoroughly familiarize yourself with the information in this manual prior to installation
and operation.
DESCRIPTION
The MCC5600 Series CCD monochrome camera combines high resolution imaging with a
very compact package. This camera features the following:
CAUTION:
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
1/3-Inch Format Monochrome CCD
This camera uses a 1/3-inch monochrome CCD (charged coupled device) interline transfer
sensing element.
Electronic/Passive Iris Control
Built-in, 4-pole iris drive connector allows this camera to be used with passive (DC
controlled) auto-iris lenses.
Lens Compatibility
The standard CS-mount and built-in DC iris control allows this camera to be used with a
wide variety of lenses, including C/CS-mount lenses in the following styles: fixed iris,
manual iris, or passive (DC controlled) auto-iris lenses. C-mount lenses require a C/CSmount adapter.
Automatic Gain Control
Automatically adjusts the image to compensate for changes in light levels when using fixed
iris or manual iris lenses.
AC Line Lock
Automatically locks the camera to the AC frequency (60 Hz)–when using AC power
sources–instead of the camera’s internal clock frequency (59.94 Hz) to avoid picture roll
during camera switching operations.
AC or DC Power Compatibility
This camera will automatically adjust to either AC or DC class 2 power supplies.
MODELS
MCC5600-2 EIA format camera
MCC5600-2X CCIR format camera
MCC5601-2 Same as MCC5600-2, except electronic shutter disabled
Pelco Manual C1926M (3/99) 3
LOCATION OF PARTS AND CONTROLS
FRONT VIEW
BACK-FOCUS
LOCKING RING
CS-MOUNT RING
1/3-INCH
CCD ELEMENT
REAR VIEW
POWER
CONNECTOR
IRIS
CONNECTOR
CAMERA MOUNT
(1/4-20 UNC)
IRIS CONNECTOR PINOUTS
4
2
31
PIN 1 = CONTROL COIL + (DAMPING COIL –)
PIN 2 = CONTROL COIL – (DAMPING COIL +)
PIN 3 = DRIVE COIL +
PIN 4 = DRIVE COIL –
Figure 1. Location of Parts and Controls (Front and Rear)
V-PHASE
VIDEO OUTPUT
(BNC)
ADJUSTMENT
POWER CONNECTOR PINOUTS
AC
DC–
AC
DC+
GND
4 Pelco Manual C1926M (3/99)