PRODUCT SPECIFICATION |
camera solutions |
|
|
Sarix® IX30 IP Camera
3.1 MEGAPIXEL HIGH DEFINITION DIGITAL CAMERAS
Product Features
•Open IP Standards
•Up to 3.1 Megapixel Resolution (2048 x 1536)
•Up to 30 Images per Second (ips) at 1280 x 720
•Auto Back Focus
•H.264 and MJPEG Compression Capability
•Day/Night Models
•Video Setup Jack
•Sensitivity Down to 0.03 lux
•Power over Ethernet (IEEE 802.3af) or 24 VAC
•Ability to Control and Monitor Video Over IPv4 and IPv6 Networks
•Electronic PTZ Through the Web Browser
•Local Storage (Micro SD) for Alarm Capture
•Adaptive Motion Detection
The Sarix® IX30 is a 3.1 megapixel, day/night camera with advanced low-light technology and a mechanical IR cut filter for increased sensitivity in low-light installations.
Sarix technology defines the next generation of video security imaging performance, delivering high definition (HD) resolution, advanced low light capabilities, consistent color science, and fast processing power. The H.264 compression video files are considerably smaller, making HD video more affordable.
Camera
The IX30 is a 3.1 megapixel, day/night camera with advanced low-light technology and a mechanical IR cut filter for increased sensitivity in low-light installations.
The IX30 can support two simultaneous video streams. The two streams can be compressed in MJPEG and H.264 formats across several resolution configurations. The streams can be configured to a variety of frame rates, bit rates, and GOP (group of pictures) structures for additional bandwidth administration.
(LENS NOT SUPPLIED WITH CAMERA)
•ONVIF v1.02 Conformant
•Audio Accessory Available
Built-In Analytics
The Pelco Camera Sabotage and Adaptive Motion Detection behaviors are standard features of the IX30. Camera Sabotage detects contrast changes in the field of view. An alarm is triggered if the lens is obstructed with spray paint, a cloth, or covered with a lens cap. Adaptive Motion Detection tracks objects that enter the field of view and triggers an alarm when an object enters a user-defined zone.
Web Interface
The IX30 uses a standard Web browser for powerful remote setup and administration.
Window Blanking
Window blanking is used to conceal user-defined privacy areas that cannot be viewed by an operator. The IX30 supports up to four blanked windows. A blanked area will appear on the screen as a solid gray window.
Systemization
The IX30 is simple to install, and the automatic back focus control feature makes sharp scene focus setup easy. A convenient video setup jack eliminates the need to use a laptop for viewing video when installing the camera.
The IX30 features built-in Power over Ethernet (PoE) IEEE 802.3af, which supplies power to the camera over the network, eliminating the need for a separate power supply. If PoE is not available, 24 VAC can be used to power the camera.
The IX30 easily connects to Pelco IP and hybrid systems such as Endura® version 2.0 (or later) and Digital Sentry® version 7.3 (or later). The camera is also compatible with Digital Sentry NVs (DS NVs), a full-featured video management software, which is available as a free download at www.pelco.com. DS NVs includes four free Pelco IP licenses and allows for the management of video from up to 64 cameras.
The IX30 features open architecture connectivity to third-party software. Pelco offers an application programming interface (API) and software developer’s kit (SDK) for interfacing with Pelco’s IP cameras.
International Standards
Organization Registered Firm;
ISO 9001 Quality System
C2957 / REVISED 8-28-13
TECHNICAL SPECIFICATIONS
GENERAL
Imaging Device |
1/3-inch (effective) |
Imager Type |
CMOS |
Imager Readout |
Progressive scan |
Maximum Resolution |
2048 x 1536 |
Signal-to-Noise Ratio |
50 dB |
Auto Iris Lens Type |
DC drive |
Electronic Shutter Range |
1 ~ 1/100,000 sec |
Wide Dynamic Range |
60 dB |
White Balance Range |
2,000° to 10,000°K |
Sensitivity |
f/1.2; 2,850°K; SNR >24 dB |
Color (33 ms) |
0.50 lux |
Color SENS (500 ms) |
0.12 lux |
Mono (33 ms) |
0.25 lux |
Mono SENS (500 ms) |
0.03 lux |
Weight (without lens) |
0.50 kg (1.11 lb) |
Shipping Weight |
0.90 kg (2.00 lb) |
ELECTRICAL
Port |
RJ-45 connector for 100Base-TX |
|
Auto MDI/MDI-X |
Cabling Type |
Cat5 or better for 100Base-TX |
Power Input |
22 to 34 VAC; 24 VAC nominal or PoE (IEEE |
|
802.3af class 3) |
Power Consumption |
<6 W |
Current Consumption |
|
PoE |
<200 mA maximum |
24 VAC |
<295 mA nominal; <390 mA maximum |
Local Storage |
Micro SD |
Alarm Input |
10 VDC maximum, 5 mA maximum |
Alarm Output |
0 to 15 VDC maximum, 75 mA maximum |
Service Port |
External 3-connector, 2.5 mm provides |
|
NTSC/PAL video output |
NOTE: VALUES IN PARENTHESES ARE INCHES;
ALL OTHERS ARE CENTIMETERS.
13.67
(5.40)
4.90
(1.95)
|
7.59 |
8.53 |
|
(3.00) |
|
|
(3.37)* |
|
|
|
|
7.92 |
|
|
(3.12) |
|
*FRONT COVER OPEN |
MECHANICAL
Lens Mount |
CS mount, adjustable |
Camera Mount |
0.25-inch (0.64 cm) UNC-20 screw, top and |
|
bottom of camera housing |
ENVIRONMENTAL
Operational Temperature |
–10° to 50°C (14° to 122°F) |
Storage Temperature |
–10° to 70°C (14° to 158°F) |
Storage Humidity |
20% to 90%, noncondensing |
SERVICE |
LED |
PORT |
|
FRONT VIEW, CAMERA ONLY
(OPENED TO EXPOSE SERVICE PORT)
REAR VIEW