Pelco IS21-DNV10S, IS21-DNV10F, IS21-CHV10S, IS21-CHV10F, IS20-DWSV8F User Manual

...

INSTALLATION

IS20/IS21 Series Camclosure

Integrated Camera System

Color and Day/Night Models Flush Mount, Surface Mount

C3472M-C (9/10)

Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Important Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

UL Listed Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Regulatory Notices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Limitation of Liability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Disclaimer of Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Parts List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Disassembling the Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Mounting the Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Using a 2-Gang Junction Box. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Surface Mounting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Flush Mounting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Wiring. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Video Output Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Power Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Cable Length and Wire Gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Image Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Pan, Tilt, and Azimuth Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Zoom and Focus Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Assembling the Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

2 C3472M-C (9/10)

Important Safety Instructions

S3125A

CAUTION:

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

The product and/or manual may bear the following marks:

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

C3472M-C (9/10) 3

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

UL LISTED MODELS

IS21-CHV10S IS21-CHV10F IS20-CHV10S IS20-CHV10F IS21-DNV10S IS21-DNV10F IS20-DNV10S IS20-DNV10F

WARNINGS

• This apparatus must be earthed.

• To prevent fire or electric shock hazard, do not expose this apparatus to rain or moisture.

• The apparatus should not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, should be placed on the apparatus.

• The connections should comply with local electrical code.

• All work related to the installation of this product should be made by qualified service personnel or system installers.

Power disconnection: Units with or without ON-OFF switches have power supplied to the unit whenever the power cord is inserted into the power source. Unplug the power cord to disconnect the main power for all units.

Precautions

1. This apparatus has no power switch.

Power is supplied from an external 12 V DC or 24 V AC power-supply device. Refer to service personnel for how to turn on/off the power.

2. To keep on using with stable performance:

• Parts of this product may deteriorate and it may shorten lifetime of this product when using in

locations subject to high temperatures and high humidity (Recommended ambient temperature: below +35 °C). Do not expose the product to direct heat such as from a heater.

• Use the appliance at temperature within –10 °C to +50 °C and humidity below 90% when using the

appliance without turning the power off.

3. Do not drop metallic parts through holes.

This could permanently damage the apparatus. Turn the power off immediately and contact qualified service personnel for service.

4. Do not rub your hands along the metallic edges.

This could cause injury.

5. Do not attempt to disassemble the camera.

• To prevent electric shock, do not remove screws or covers.

• There are no user-serviceable parts inside. Ask qualified service personnel for servicing.

6. Handle the camera with care.

Do not abuse the camera. Avoid striking, shaking, etc. The camera could be damaged by improper handing or storage.

7. Do not touch the dome cover with your bare hands.

A dirty dome cover causes deterioration in picture quality.

4 C3472M-C (9/10)

8. Cleaning the camera body:

• Turn the power off when cleaning the product. Use a dry cloth to clean the product.

• Do not use strong abrasive detergent when cleaning the product body. When the dirt is hard to

remove, use a mild detergent and wipe gently. Then, wipe off the remaining detergent with a dry cloth; otherwise, it may cause discolouration.

• When using a chemical cloth for cleaning, read the caution provided with the chemical cloth product.

9. Discolouration on the CCD color filter:

When continuously viewing a bright light source such as a spotlight, the color filter of the CCD may have deteriorated and it may cause discolouration. Even when changing the fixed viewing direction after continuously viewing a spotlight for a certain period, the discolouration may remain.

10. Do not aim the camera at strong light sources.

A light source such as a spot light causes a blooming (light bleeding) or a smear (vertical lines).

11. Use this product for indoor use only.

Do not expose this product to direct sunlight for hours and do not install the product near a heater or an air conditioner as this may cause deformation, discolouration, and malfunction. Keep this product away from water.

12. Avoid installing in the following locations.

• Locations where it may get wet from rain or water splash

• Locations where a chemical agent is used such as a swimming pool (indoor and outdoor)

• Locations subject to steam and oil smoke such as a kitchen

• Locations near flammable gas or vapor

• Locations where radiation or x-ray emissions are produced

• Locations subject to strong magnetic field or radio waves

• Locations where corrosive gas is produced

• Locations where it may be damaged by briny air such as seashores

• Locations where the temperature is not within –10 °C to +50 °C.

• Locations subject to vibrations (this product is not designed for on-vehicle use.)

13. Installing site:

Contact your dealer for assistance if you are unsure of an appropriate place in your particular environment.

14. Do not install the camera in a humid or dust-laden environment; otherwise, the lifetime of the internal parts may be shortened.

15. Be sure to remove this apparatus if it is not in use.

16. Radio interference:

When the product is used near a TV/radio antenna, strong electric field, or magnetic field (near a motor or a transformer), images may be distorted and audible noise may be produced.

17. Mounting screws:

It is necessary to procure screws or bolts to mount the product. Prepare them according to the material and strength of the area where the camera is to be installed. The screws and bolts must be tightened with an appropriate tightening torque according to the material and strength of the installation area.

C3472M-C (9/10) 5

We declare under our sole responsibility that the product to which this declaration relates is in conformity with the standards or other normative documents following the provisions of Directives 2006/95/EC and 2004/108/EC.

Wij verklaren als enige aansprakelijke, dat het product waarop deze verklaring betrekking heeft, voldoet aan de volgende normen of andere normatieve documenten, overeenkomstig de bepalingen van Richtlijnen 2006/95/EC en 2004/108/EC.

Vi erklærer os eneansvarlige for, at dette produkt, som denne deklaration omhandler, er i overensstemmelse med standarder eller andre normative dokumenter i følge bestemmelserne i direktivene 2006/95/EC og 2004/108/EC.

Vi deklarerar härmed värt fulla ansvar för att den produkt till vilken denna deklaration hänvisar är i överensstämmelse med standarddokument, eller andra normativa dokument som framstölls i direktiv nr. 2006/95/EC och 2004/108/EC.

Ilmoitamme yksinomaisella vastuullamme, että tuote, jota tämä ilmoitus koskee, noudattaa seuraavia standardeja tai muita ohjeellisia asiakirjoja, jotka noudattavat direktiivien 2006/95/EC ja 2004/108/EC säädöksiä.

Vi erklærer oss alene ansvarlige for at produktet som denne erklæringen gjelder for, er i overensstemmelse med følgende normer eller andre normgivende dokumenter som følger bestemmelsene i direktivene 2006/95/EC og 2004/108/EC.

Wir erklären in alleiniger Verantwortung, daß das Produkt, auf das sich diese Erklärung bezieht, mit den folgenden Normen oder normativen Dokumenten übereinstimmt. Gemäß den Bestimmungen der Richtlinie 2006/95/EC und 2004/108/EC.

Nous déclarons sous notre propre responsabilité que le produit auquel se réfère la présente déclaration est conforme aux normes spécifiées ou à tout autre document normatif conformément aux dispositions des directives 2006/95/CE et 2004/108/CE.

Nosotros declaramos bajo nuestra única responsabilidad que el producto a que hace referencia esta declaración está conforme con las normas u otros documentos normativos siguiendo las estipulaciones de las directivas 2006/95/CE y 2004/108/CE.

Noi dichiariamo sotto nostra esclusiva responsabilità che il prodotto a cui si riferisce la presente dichiarazione risulta conforme ai seguenti standard o altri documenti normativi conformi alle disposizioni delle direttive 2006/95/CE e 2004/108/CE.

Regulatory Notices

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RADIO AND TELEVISION INTERFERENCE

This equipment has been tested and found to comply with the limits of a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Changes and Modifications not expressly approved by the manufacturer or registrant of this equipment can void your authority to operate this equipment under Federal Communications Commission’s rules.

In order to maintain compliance with FCC regulations shielded cables must be used with this equipment. Operation with non-approved equipment or unshielded cables is likely to result in interference to radio and television reception.

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

6 C3472M-C (9/10)

Limitation of Liability

THIS PUBLICATION IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THE THIRD PARTY’S RIGHT.

THIS PUBLICATION COULD INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL ERRORS. CHANGES ARE ADDED TO THE INFORMATION HEREIN, AT ANY TIME, FOR THE IMPROVEMENTS OF THIS PUBLICATION AND/OR THE CORRESPONDING PRODUCT (S).

Disclaimer of Warranty

IN NO EVENT SHALL PELCO BE LIABLE TO ANY PARTY OR ANY PERSON, EXCEPT FOR REPLACEMENT OR REASONABLE MAINTENANCE OF THE PRODUCT, FOR THE CASES, INCLUDING BUT NOT LIMITED TO BELOW:

1. ANY DAMAGE AND LOSS, INCLUDING WITHOUT LIMITATION, DIRECT OR INDIRECT, SPECIAL, CONSEQUENTIAL OR EXEMPLARY, ARISING OUT OF OR RELATING TO THE PRODUCT;

2. PERSONAL INJURY OR ANY DAMAGE CAUSED BY INAPPROPRIATE USE OR NEGLIGENT OPERATION OF THE USER;

3. UNAUTHORIZED DISASSEMBLE, REPAIR OR MODIFICATION OF THE PRODUCT BY THE USER;

4. INCONVENIENCE OR ANY LOSS ARISING WHEN IMAGES ARE NOT DISPLAYED, DUE TO ANY REASON OR CAUSE INCLUDING ANY FAILURE OR PROBLEM OF THE PRODUCT;

5. ANY PROBLEM, CONSEQUENTIAL INCONVENIENCE, OR LOSS OR DAMAGE, ARISING OUT OF THE SYSTEM COMBINED BY THE DEVICES OF THIRD PARTY;

6. ANY CLAIM OR ACTION FOR DAMAGES, BROUGHT BY ANY PERSON OR ORGANIZATION BEING A PHOTOGENIC SUBJECT, DUE TO VIOLATION OF PRIVACY WITH THE RESULT OF THAT SURVEILLANCECAMERA’S PICTURE, INCLUDING SAVED DATA, FOR SOME REASON, BECOMES PUBLIC OR IS USED FOR THE PURPOSE OTHER THAN SURVEILLANCE.

C3472M-C (9/10) 7

Description

The IS20/IS21 Series Camclosure® 2 camera system integrates a camera and lens package into a small versatile indoor enclosure that can be mounted directly to, or recessed into, a ceiling or wall. The IS20/IS21 Series features a three-axis camera and lens positioning system that is capable of a wide variety of pan and tilt angles.

The day/night models feature a high resolution (540 TVL) color camera with auto iris and varifocal lens. Application examples include environments that require monochrome images at night and color images during the day.

The color models feature a high resolution (540 TVL) color camera with auto iris and varifocal lens. Application examples include all general-purpose environments.

MODELS

IS21-CHV10S Clear dome, color, surface mount, NTSC IS21-CHV10F Clear dome, color, flush mount, NTSC IS20-CHV10S Smoke dome, color, surface mount, NTSC IS20-CHV10F Smoke dome, color, flush mount, NTSC IS21-DNV10S Clear dome, day/night, surface mount, NTSC IS21-DNV10F Clear dome, day/night, flush mount, NTSC IS20-DNV10S Smoke dome, day/night, surface mount, NTSC IS20-DNV10F Smoke dome, day/night, flush mount, NTSC IS21-CHV10SX Clear dome, color, surface mount, PAL IS21-CHV10FX Clear dome, color, flush mount, PAL IS20-CHV10SX Smoke dome, color, surface mount, PAL IS20-CHV10FX Smoke dome, color, flush mount, PAL IS21-DNV10SX Clear dome, day/night, surface mount, PAL IS21-DNV10FX Clear dome, day/night, flush mount, PAL IS20-DNV10SX Smoke dome, day/night, surface mount, PAL IS20-DNV10FX Smoke dome, day/night, flush mount, PAL

PARTS LIST

SURFACE MODELS

Qty Description

1 Camera assembly

1 Installation manual

FLUSH MODELS

Qty Description

1 Camera assembly

1 Installation manual

1 Flush mount kit

1 Ceiling mount bracket

5 Fixing screws (M4 x 8)

1 Template

1 Cover

8 C3472M-C (9/10)

Product Overview

(Day/night model shown)

Figure 1. Product Overview of IS20-DN Camera

Video Output Connector: Transmits composite video signals.

Power Cable: Supplies 24 V AC or 12 V DC from an external power source.

Panning Table Lock Screw (LOCK): Fixes the panning table.

Panning Table: Adjusts the panning position of the camera.

Tilting Table: Adjusts the tilting position of the camera.

Tilting Lock Screws (left and right): Fixes the tilting position.

Azimuth Adjuster: Adjusts the azimuth angle of the camera.

Zoom Lock Lever: Fixes the zoom position after adjusting.

Focus Lock Lever: Fixes the focus position after adjusting.

C3472M-C (9/10) 9

+ 19 hidden pages