Pelco IS20-AP User Manual

INSTALLATION

IS20-AP Electrical Outlet Box Adapter Plate

For use with IS20/IS21 Series Cameras

C2260M (5/11)

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Only use attachments/accessories specified by the manufacturer.

6. Installation should be done only by qualified personnel and conform to all local codes.

7. Only use replacement parts recommended by Pelco.

C2260M (5/11) 3

Description

The IS20-AP electrical box adapter plate is specifically designed for use with the IS20/IS21 Series
Camclosure
IS20-DWS/IS21-DWS fixed dome camera to a standard 4S electrical box.

®

integrated camera system. Use the IS20-AP to mount an IS20/IS21 or an

PARTS LIST

The following parts are supplied.

Qty Description

1 IS20-AP adapter plate

4 Screws (white), 8-32 x 0.75-inch, flat head, with washers and nuts

4 Screws, 8-32 x 0.75-inch, pan head

USER SUPPLIED PARTS LIST

The following installation parts and tools are needed but not supplied.

Qty Description

1 IS20/IS21 Series or IS20-DWS/IS21-DWS Series fixed dome camera

1 Screwdriver, #2 Phillips head screwdriver

1 4S electrical outlet box

4 C2260M (5/11)

Installation

IS20/IS21 SERIES

1. Attach the IS20-AP adapter plate to a 4S electrical outlet box (not supplied).

a. Install two of the 8-32 x 0.75-inch flat head screws. Secure them to the adapter plate with the

washers and nuts.

b. Pull the video and power wires through the square opening in the adapter plate.

c. Attach the adapter plate to the corresponding holes in the electrical outlet box with the two

remaining 8-32 x 0.75-inch flat head screws (supplied).

Figure 1. Installing the Adapter Plate and IS20/IS21 Series Camera

ì

Electrical Outlet Box

î

Adapter Plate

ï

IS20/IS21 Series Camera

ñ

Top Cover

2. Remove the top cover to prepare the camera for installation. Refer to the installation/operation
manual supplied with the IS20/IS21 Series camera system for wiring instructions.

C2260M (5/11) 5

3. Connect the video and power wires to the camera. Refer to the installation/operation manual
supplied with the IS20/IS21 Series camera system for wiring instructions.

4. Align the indentation on the camera with the square opening in the adapter plate.

Figure 2. Indentation on Camera

5. Attach the camera to the adapter plate with the four 8-32 x 0.75-inch pan head screws (supplied).

6. Complete the installation. Refer to the installation/operation manual supplied with the
IS20/IS21 Series camera system for more information.

6 C2260M (5/11)

IS20-DWS/IS21-DWS SERIES

1. Attach the IS20-AP adapter plate to a 4S electrical outlet box (not supplied).

a. Pull the video and power wires through the square opening in the adapter plate.

b. Attach the adapter plate to the corresponding holes in the electrical outlet box with the two

remaining 8-32 x 0.75-inch flat head screws (supplied).

2. Pull the wiring through the camera attachment.

3. Attach the camera attachment to the adapter plate with the four 8-32 x 0.75-inch pan head screws
(supplied). Be sure to align the indentation on the camera attachment with the square opening in the
adapter plate.

Figure 3. Installing the Adapter Plate and the IS20-DWS/IS21-DWS Camera Attachment

ì

Electrical Outlet Box

î

Adapter Plate

ï

Camera Attachment

4. Connect the video and power wire to the camera. Refer to the installation/operation manual
supplied with the IS20/IS21 Series camera system for wiring instructions.

C2260M (5/11) 7

5. Attach the camera.
a. Align the single rib on the camera with the protrusion on the camera attachment.

b. Engage the camera attachment mounting hooks with the mounting holes on the camera

attachment.

c. Rotate the camera counterclockwise to secure the camera to the camera attachment until it

locks into place.

NOTE: When the camera is secured, the camera protrusion is aligned with the camera fixing screw hole
and the double rib on the camera.

Figure 4. Attaching the Camera to the IS20-DWS/IS21-DWS Camera Attachment

ì

Camera Attachment Mounting Hole

î

Protrusion

ï

Camera Attachment Mounting Hook

ñ

Fixing Screw Hole

ó

Single Rib

6. Complete the installation. Refer to the installation/operation manual supplied with the
IS20/IS21 Series camera system for more information.

8 C2260M (5/11)

Specifications

8.48

(3.34)

0.31

(0.12)

8.48

(3.34)

Ø 15.75

(6.20)

MODEL

IS20-AP Electrical outlet box adapter plate, designed for use with

GENERAL

Construction Aluminum

Finish White polyester powder coat

Unit Weight 0.16 kg (0.35 lb)

NOTE: VALUES IN PARENTHESES ARE INCHES; ALL OTHERS ARE CENTIMETERS.

IS20/IS21 Series fixed dome cameras

C2260M (5/11) 9

The materials used in the manufacture of this document and its components are compliant to the requirements of
Directive 2002/95/EC.

REVISION HISTORY

Manual # Date Comments

C2260M 5/11 Original version.

10 C2260M (5/11)

PRODUCT WARRANTY AND RETURN INFORMATION

WARRANTY

Pelco will repair or replace, without charge, an y merchandise proved defective in material or workmanship for a period of one year after the date of
shipment.

Exceptions to this warranty are as noted below:

• Five years:
– Fiber optic products
– Unshielded Twisted Pair (UTP) transmission products
– CC370 1H-2, CC3701H-2X, CC3751H-2, CC3651H-2X, MC3651H-2, and MC3651H-2X camera models

• Three years:
– F ixed network cameras and network dome cameras with Sarix® technology
– Sar ix thermal imaging products (TI and ESTI Series)
– Fixed camera models (CCC1390H Series, C10DN Series, C10CH Series, and IP3701H Series)
– EH150 0 Series enclosures

®

– Spectra

IV products (including Spectra IV IP)

– S pectra HD dome products
– Cam closure
– DX Series video recorders (except DX9000 Series which is covered fo r a period of one year), DVR5100 Series digital video recorders, Digital

– En dura
– Ge nex® Series products (multiplexers, server, and keyboard)
– PMCL200/300/400 Series LCD monitors
– PMCL5xxF Series and PMCL5xxNB Series LCD monitors

• Two years:
– S tandard varifocal, fixed focal, and motorized zoom lenses
– DF5/DF8 Series fixed dom e products
– Lega cy® Series integrated positioning systems
– Spectra III™, Spectra Mini, Spectra Mini IP, Esprit®, ExSite®, ExSite IP, and PS20 scanners, including when used in continuous motion

– Espr it Ti and TI2500 Series thermal imaging products
– Espr it and WW5700 Series window wiper (excluding wiper blades)
– CM 6700/CM6800/CM9700 Series matrix
– Digital Light Processing (DLP®) displays (except lamp and color wheel). The lamp and color wheel will be covered for a period of 90 days. The

• Six months:
– Al l pan and tilts, scanners, or preset lenses used in continuous motion applicatio ns (preset scan, tour, and auto scan modes)

Pelco will warrant all replacement parts and repairs for 90 days from the date of Pelco shipment. All goods requiring warranty repair shall be sent
freight prepaid to a Pelco designated locatio n. Repairs made necessary by reason of misuse, alteration, normal wear, or accident are no t covered under
this warranty.

Pelco assumes no risk and shall be subject to no li ability for damages or loss resulting from the specific use or application made of the Products.
Pelco’s liability for any claim, whether based on breach of contract, negligence, infringement of any rights of any party or product liability, relating to
the Products shall not exceed the price paid by the Dealer to Pelco for such Products. In no event will Pelco be liable for any special, incidental, or
consequential damages (including loss of use, loss of profit, and claims of third parties) however caused, whether by the negligence of Pelco or
otherwise.

The above warranty provides the Dealer with spe cific legal rights. The Dealer may also have additional right s, which are subject to variation from state
to state.

If a warranty repair is required, the Dealer must contact Pelco at [phone] or [phone] to obtain a Repair Authorization number (RA), and
provide the following information:

1. Model and serial number

2. Date of shipment, P.O. number, sales order number, or Pelco invoice number

3. Details of the defect or problem

If there is a dispute regarding the warranty of a product that does not fall un der the warranty conditions stated above, please include a written
explanation with the product wh en returned.

Method of return shipment shall be the same or equal to the method by which the item was received by Pelco.

RETURNS

To expedite parts returned for repair or credit, please call Pelco at [phone] or [phone] to obtain an authorization number (CA number if
returned for credit, and RA number if returned for repair) and designated return location.

All merchandise returned for credit may be subject to a 20 percent restocking and refurbishing charge.

Goods returned for repair or credit should be clearly identified with the assigned CA or RA number and freight should be prepaid.

®

Series (IS, ICS, IP) integrated camera systems

®

Sentry

Series hardware products, DVX Series digital video recorders, and NVR300 Series network video recorders

®

Series distributed network-based video pro ducts

applications

air filter is not covered under warran ty.

5-6-11

Pelco, the Pelco logo, and other trademarks a ssociated with Pelco products referred to in this publication are trademarks of P elco, Inc. or its affiliates.
All other product names and services are th e property of their respective companies.
Product specifications and availability are subject to change with out notice.
© Copyright 2011, Pelco, Inc. All righ ts reserved.

www.pelco.com

Pelco by Schneider Electric 3500 Pelco Way Clovis, California 93612-5699 United States

USA & Canada Tel [phone] Fax [phone]

International Tel [phone] Fax [phone]