PRODUCT SPECIFICATION
Camclosure
IS150 SERIES IN-CEILING, WDR, DAY/NIGHT, HIGH RES
Product Features
• Fully-Integrated Enclosure with Camera and Lens
• Rugged, High-Impact, Vandal-Resistant, Puncture-Proof Domes;
Tamper-Resistant Hardware
• 4 Camera Options:
– Day/Night Wide Dynamic Range (WDR): Pixel-Based Imager for
Accurate Color Representation, Progressive Scan
– Day/Night High Resolution: 540 TVL
– Wide Dynamic Range (WDR): Pixel-Based Imager for Accurate
Color Representation, Progressive Scan
– High Resolution Color: 540 TVL
• Varifocal Lens Options: 3 mm to 9.5 mm, 9 mm to 22 mm
• Fixed Lens Options: 3 mm, 3.6 mm, 6 mm, 8 mm, 12 mm
• Includes Both Composite and Unshielded Twisted Pair (UTP) Outputs
• Easy to Install; Camera Module Easy to Adjust and Remove
• Meets NEMA Type 4X and IP66 Standards
®
IS Series Rugged Mini Dome
• All Cameras Feature Digital Signal Processing
• 12 VDC or 24 VAC Operation, Autosensing
• Available with Smoked or Clear Bubble
• Includes Service Connector for Video Output
camera site
IS150 SERIES DOME
Camera Modules
®
The IS150 Series Camclosure
offers a large selection of camera and lens options. Available camera
modules include the following:
• Day/night wide dynamic range (WDR) and wide dynamic
range —Pelco’s WDR uses a pixel-based imager that adjusts for
lighting by pixel. Traditional CCD cameras adjust the entire image
for lighting conditions that appear in a small portion of the image
or that are not extreme. Different lighting problems occur at night.
Car headlights and parking lot lights are good examples of
problematic video images. Use Pelco’s Day/Night WDR where you
need the camera to adjust from extreme lighting to low light
conditions.
• Day/night high resolution (540 TVL) color camera with auto
iris, varifocal lens—Application examples include environments
that require monochrome images at night and color images during
the day.
• High resolution (540 TVL) color camera with auto iris, varifocal
lens or fixed iris lens—Application examples include all generalpurpose environments.
Integrated Camera System
Enclosure Modules
The IS150 Series Camclosure Integrated Camera System
combines a camera and lens package into a small, high-security
enclosure for medium-security installations subject to vandalism. The
in-ceiling dome is designed for suspended ceiling or recessed ceiling/
wall installations. An adapter plate is supplied with the dome to mount
the unit to a 4S electrical box or to provide additional support for
suspended ceiling installations.
The lower dome of the IS150 Series is available with either a clear
or a smoked bubble. Models with a clear bubble include a liner for
discreet viewing. Domes may be purchased without the camera
module for pre-installation or for camera bicycling.
C3427 / REVISED 4-07
IP66
U.S. Patents
D476,025; 6,715,939 B2; 6,805,498 B2
International Standards
Organization Registered Firm;
ISO 9001 Quality System
TECHNICAL SPECIFICATIONS
GENERAL
Construction Aluminum with steel camera mounting
Finish White polyester powder coat trim ring with
Light Attenuation
Smoked 1.5 F-stops light loss
Clear Zero light loss
Unit Weight 1.70 lb (0.77 kg)
Shipping Weight 3.0 lb (1.36 kg)
bracket and polycarbonate dome
charcoal gray back box
ELECTRICAL
Input Voltage* 12 VDC or 24 VAC (±10%), autosensing
Synchronization Internal or AC line lock
Power Consumption
Camera <3 W (DW/CW models)
Heaters 10 W when active; thermostatically controlled
<4 W (DN/CH models)
MECHANICAL
Pan/Tilt Adjustment Manual
Pan 360°
Tilt 80° (20° to 100° range)
Rotation 360°
VIDEO
Signal System NTSC or PAL
Video Output
Composite 1 Vp-p, 75 ohms
UTP 1 Vp-p, 100 ohms
Video Connectors 1 composite BNC and 1 UTP
Service Connector 3-conductor, 2.5 mm connector for video
output to optional ISC-SC cable
CERTIFICATIONS/RATINGS/PATENTS
• CE, Class B
• UL Listed
• UL Listed to Canadian safety standards
• FCC, Class B
• Meets NEMA Type 4X and IP66 safety standards
• Meets NEC requirements for use in environmental air handling spaces
• U.S. Patents D476,025; 6,715,939 B2; 6,805,498 B2
5.48 (13.92)
3.50 (8.89)
1.75
(4.45)
2.42
(6.15)
3.75 (9.53)
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;
ALL OTHERS ARE INCHES.
ENVIRONMENTAL
Environment Low temperature, indoor/outdoor
Operating Temperature -50° to 122°F (-46° to 50°C);
Thermostat Operation Heater is thermostatically controlled to
*24 VAC power is recommended when installing any Camclosure Integrated Camera System under fluorescent lighting conditions.
de-ices to 25°F (-4°C)
activate ON at 50°F (10°C) and OFF at
80°F (27°C)
TECHNICAL SPECIFICATIONS
CAMERA SPECIFICATIONS
Imaging Device 1/3-inch Pixel Based Imager 1/3-inch Interline Color CCD 1/3-inch Pixel Based Imager 1/3-inch Interline Color CCD
Dynamic Range
(DW/CW only)
Scanning System 2:1 Interlace/
Horizontal Resolution NTSC: 504 TV lines
Signal-to-Noise Ratio >53 dB >50 dB >53 dB >50 dB
Minimum Illumination Color (day): 0.8 lux
Gain Control Auto (36 dB maximum) Auto/Manual (DIP switch) Auto (36 dB maximum) Auto/Manual (DIP switch)
Exposure Auto (1/15 - 1/22,000) Auto (1/60 - 1/100,000) Auto (1/15 - 1/22,000) Auto (1/60 - 1/100,000)
White Balance Auto or manual (DIP switch),
Backlight
Compensation
102 dB typical
120 dB maximum
Progressive (DIP switch)
PAL: 504 TV lines
SENS 8X: 0.2 lux
B-W (night): 0.08 lux
SENS 8X: 0.02 lux
(F1.0, 40 IRE, AGC on, 75% scene
reflectance)
2800°K - 7500°K
Auto ON/OFF (DIP switch) Auto ON/OFF (DIP switch)
Day/Night
Wide Dynamic Range
Varifocal, Auto Iris
(DW Series)
Day/Night
High Resolution
Varifocal, Auto Iris
(DN Series)
— 102 dB typical
2:1 Interlace 2:1 Interlace/
NTSC: 540 TV lines
PAL: 540 TV lines
Color (day): 0.15 lux
B-W (night): 0.015 lux
(F1.0, 40 IRE, AGC on,
75% scene reflectance)
Auto or manual (DIP switch),
2500°K - 9500°K
Wide Dynamic Range
Varifocal, Auto Iris
(CW Series)
120 dB maximum
Progressive (DIP Switch)
NTSC: 504 TV lines
PAL: 504 TV lines
Color (day): 0.8 lux
SENS 8X: 0.2 lux
(F1.0, 40 IRE, AGC on,
75% scene reflectance)
Auto or manual (DIP switch),
2800°K - 7500°K
High Resolution
Varifocal, Auto Iris
(CH Series)
—
2:1 Interlace
NTSC: 540 TV lines
PAL: 540 TV lines
0.2 lux
(F1.0, 40 IRE, AGC on, 75% scene
reflectance)
Auto or manual (DIP switch),
2500°K - 9500°K
LENS SPECIFICATIONS
Varifocal With Auto Iris Fixed Focal Without Iris
Series DW/CW Series DN/CH Series CH Series
Focal Length 3.0 mm ~ 9.5 mm 9.0 mm ~ 22.0 mm 3.0 mm ~ 9.5 mm 9.0 mm ~ 22.0 mm 3 mm 3.6 mm 6.0 mm 8.0 mm 12.0 mm
Format Size 1/3-inch 1/3-inch 1/3-inch 1/3-inch 1/3-inch 1/3-inch 1/3-inch 1/3-inch 1/3-inch
Relative Aperture (F) 1.0 to 1.8 1.5 to 2.9 1.0 to 1.8 1.5 to 2.9 2.0 2.0 2.0 2.0 2.2
Operation
Iris
Focus
Zoom
Angle of View*
Horizontal
Diagonal
Vertical
*Focal length specifications presume a 10% horizontal and 4% vertical monitor overscan.
Auto
Manual
Manual
100.4° to 31.6°
131.6° to 39.6°
72.8° to 23.8°
Auto
Manual
Manual
32.4° to 13.6°
41.4° to 17.2°
23.8° to 10.2°
Auto
Manual
Manual
95.0° to 30.2°
123.6° to 37.6°
69.0° to 22.6°
Auto
Manual
Manual
30.6° to 13.0°
39.2° to 16.4°
22.6° to 9.8°
N/A
Manual
N/A
90.2°
120.0°
65.4°
N/A
Manual
N/A
72.9°
92.0°
54.1°
N/A
Manual
N/A
40.1°
53.0°
30.4°
N/A
Manual
N/A
31.5°
40.0°
23.7°
N/A
Manual
N/A
19.7°
28.0°
15.0°
SYSTEM MODELS AND ACCESSORIES
MODEL NUMBERS
Dome Only
IS150-ENC IS150 Series in-ceiling mount enclosure (no camera/lens)
IS150-LD IS150 Series smoked bubble
IS151-LD IS150 Series clear bubble with liner
When ordering an IS150 Series in-ceiling mount dome with no camera or lens, please order 1 enclosure and 1 bubble.
System Numbers
Use this table to create a model number to specify your IS150 Series Camclosure. Note the additional information below the table for fixed lens and NTSC/PAL options.
For example, IS151-DNV9X is the model number for a PAL version color day/night high resolution camera with a clear bubble and a 3 mm to 9.5 mm varifocal lens.
For information, contact your Pelco sales representative.
IS15 a–b c d
Bubble
Camera
Lens
PAL
Bubble (a) Camera (b) Lens (c) PAL (d)
0 Smoked
1 Clear with Black Liner
DW Color Day/Night
Wide Dynamic Range
DN Color Day/Night
High Resolution
CW Color Wide Dynamic Range
CH Color High Resolution
Available with all cameras:
V9 Varifocal, 3 mm to 9.5 mm, Auto Iris
V22 Varifocal, 9 mm to 22 mm, Auto Iris
Available with CH cameras:
3 Fixed, 3 mm
3.6 Fixed, 3.6 mm
6 Fixed, 6 mm
8 Fixed, 8 mm
12 Fixed, 12 mm
DN and CH cameras only:
XPAL
Do not use for NTSC.
RECOMMENDED POWER SUPPLIES
TF2000 Power supply for one 24 VAC camera, 20 VA
MCS Series Multiple 24 VAC camera power supply, indoor
MCS*E Series Multiple 24 VAC camera power supply, indoor
WCS Series Single/multiple 24 VAC camera power supply,
outdoor
Pelco Worldwide Headquarters:
3500 Pelco Way, Clovis, California 93612-5699 USA
USA & Canada Tel: (800) 289-9100 • FAX (800) 289-9150
International Tel: (559) 292-1981 • FAX (559) 348-1120
www.pelco.com
OPTIONAL MOUNTS
ICS150-P 2 x 2 ft (61 x 61 cm) metal ceiling panel for
ICS-SC 4-foot service/monitor cable; compatible with
IS150 Series in-ceiling dome
any standard monitor BNC connector
Pelco, the Pelco logo, and Camclosure are registered trademarks of Pelco.
Specifications subject to change without notice.
©Copyright 2007, Pelco. All rights reserved.
Loading...