Pelco IRD2024 Specsheet

PRODUCT SPECIFICATION

IRD2024/ERD2000 Receiver

COAXITRON® COMPATIBLE, FIXED SPEED

Product Features

• Indoor/Outdoor Models

• Coaxitron® Compatible, Fixed Speed

• Pan/Tilt Control, Including Auto and Random Scan

• Lens Control (Zoom, Focus, Iris)

• Camera Power (24 VAC)

• Enclosure Power (Outdoor Model Only)

• Two Auxiliary Outputs

• NTSC or PAL Video

• Test Local Control Capability

• Ground Isolated BNCs (Eliminates Ground Loops)

• Video Transient Protection

• Power and Communication Indicator LEDs

• Lockable Enclosure (Outdoor Model Only)

camera solutions

ERD2200 OUTDOOR RECEIVER

IRD2024 INDOOR RECEIVER

The

IRD/ERD2000 Series

speed pan/tilts and domes. It replaces the non-preset models in the
CX9000RX/RXI Series receiver. This receiver offers removable screw
terminal connectors for quick and easy installation. Power and
communication indicators are provided for troubleshooting
purposes.

The

IRD/ERD2000 Series

Coaxitron controllers, including the CM6700/6800, KBD9000,
MPT9000/9500, and MX4000. With Coaxitron control, pan/tilt and
lens control signals are transmitted over the video coaxial cable,
saving wiring costs. The control data is superimposed on the
vertical blanking interval of the video signal.

Standard features include pan/tilt control (including auto and
random scan), camera power, lens control (zoom, iris, and focus),
and two auxiliary outputs. The receiver also can be used with the
LRD41TLC test local control module, which allows on-site testing
and troubleshooting of system functions. The TLC module plugs into
the receiver and operates off the receiver’s power. Use the TLC to
check pan/tilt functions (up, down, left, and right), iris open/close,
focus near/far, and zoom telephoto/wide angle.

receiver operates all of Pelco’s fixed

works with standard and extended

The indoor model accepts 24 VAC input and provides 24 VAC output
for camera power and pan/tilt operation. Simplicity of design allows
the indoor unit to be installed in a weatherproof housing to create
the outdoor model. The outdoor model accepts either 120 or
230 VAC input. It supplies 24 VAC for camera power, 24, 120, or
230 VAC for pan/tilt operation, and 120 or 230 VAC for heater,
blower, or defroster accessories inside the camera enclosure.

C1506 / REVISED 1-05

IP66

International Standards

Organization Registered Firm;

ISO 9001 Quality System

TECHNICAL SPECIFICATIONS

MODELS

IRD2024 Indoor, fixed speed, Coaxitron receiver,

24 VAC input, 24 VAC output for camera
power and pan/tilt operation

ERD2200 Outdoor, fixed speed, Coaxitron receiver,

120/230 VAC input, 24 VAC output for camera
power, 24, 120, or 230 VAC output for pan/tilt
operation, and 120 or 230 VAC output for
enclosure accessories

MECHANICAL

Connectors

Video BNC
Pan/Tilt Screw terminals
Camera and Lens Screw terminals
Power Connectors Screw terminals

Cable Entry

IRD2200 Openings for .75-inch (1.9 cm) conduit

ELECTRICAL

Input Voltage

IRD2024 24 VAC, 50/60 Hz
ERD2200 120/230 VAC, 50/60 Hz

Output Voltage

IRD2024

Camera, Pan/Tilt 24 VAC
Lens 8 VDC

ERD2200

Camera 24 VAC
Lens 8 VDC
Pan/Tilt 24/120/230 VAC
Enclosure 120/230 VAC

Power Consumption

IRD2024 45 VA maximum

ERD2200 90 VA maximum
Video Input/Output 75 ohms
Video Bandwidth 10 MHz
Video Gain Unity
Video Formats NTSC or PAL
Control Method Standard or extended Coaxitron
Auxiliary Outputs

AUX 1 One open collector, TTL

5 VDC, 15-20 mA (used for wiper or low
current relays)

AUX2 One Form C relay output (N.O./N.C.)

1 A at 24 VDC or 0.5 A at 120 VAC

Operating Distance Cable distances are approximate according to

cable type used. 75-ohm coax required.

GENERAL

Environment

IRD2024 Indoor
ERD2200 Outdoor

Construction

IRD2024 Aluminum
ERD2200 Aluminum (receiver), steel (housing)

Finish

IRD2024 Black polyester powder coat
ERD2200 Gray polyester powder coat

Operating Temperature

IRD2024 -10° to 122°F (-23° to 50°C)
ERD2200 -50° to 122°F (-46° to 50°C)

Dimensions

IRD2024 10.3" L x 6.0" W x 1.75" H

(26.2 x 15.2 x 4.4 cm)

ERD2200 15.2" L x 12.2" W x 5.0" H

(38.6 x 31.0 x 12.7 cm)

Unit Weight

IRD2024 1.25 lb (0.5 kg)
ERD2200 9.90 lb (4.5 kg)

Shipping Weight

IRD2024 3 lb (1.3 kg)
ERD2200 13 lb (5.8 kg)

CERTIFICATIONS/RATINGS

• CE, Class B

• UL Listed

• UL Listed to Canadian safety standards

• FCC, Class B

• Meets NEMA Type 1, IP10 standards (IRD2024); NEMA Type 4, IP66
standards (ERD2200)

OPTIONAL ACCESSORIES

LRD41TLC Test local control module. Receiver plug-in

module for on-site testing of system functions

RECOMMENDED POWER SUPPLIES

MCS Series Indoor power supply, 24 VAC output.

Recommended for use with IRD2024.

Cable Type Distance Distance Using EA2000

RG59/U

RG6/U
RG11/U
RG15/U

750 ft (229 m)
1,000 ft (309 m)
1,500 ft (457 m)

—

Pelco, Inc. Worldwide Headquarters:

3500 Pelco Way, Clovis, California 93612-5699 USA

USA & Canada
International
www.pelco.com

Tel: [phone] • FAX: [phone]

Tel: [phone] • FAX: [phone]

3,000 ft (914.4 m)
4,500 ft (1,371.6 m)
6,000 ft (1,828.8 m)
8,000 ft (2,483.4 m)

Pelco, the Pelco logo, and Coaxitron are registered trademarks of Pelco, Inc.

Product specifications and availability subject to change without notice.

©Copyright 2005, Pelco, Inc. All rights reserved.