Pelco IPSXME136-7, IPSXME136-2, IPSXME036-7, IPSXME036-2, IPSXM3136 Specsheet

...

Download

Page 1

PRODUCT SPECIFICATION

EXSITE IP PAN/TILT SERIES SHOWN WITH

WXM100 WALL MOUNT (NOT SUPPLIED)

camera solutions

ExSite® IP Series Explosionproof Camera System

NETWORK FIXED AND PAN/TILT SYSTEMS WITH IOP CAMERA AND OPTIONAL WIPER

Product Features

• For Use in a Variety of Harsh and/or Hazardous Environments,

including Marine Environments

• Ability to Control and Monitor Video Over IPv4 and IPv6 Networks

• Electropolished 316L Stainless Steel Construction

• Upright or Inverted Operation

• Both Fixed and Pan/Tilt Options

• Autofocus, High Resolution Integrated Optics Package (IOP) with 36X

Day/Night, Motion Detection, and 540 TVL Horizontal Resolution

• Multilingual On-Screen Menus

• Password Protection

• Web Interface for Camera Configuration

• H.264, MPEG-4, and MJPEG Compression

• Supported Protocols: TCP/IP, UDP/IP (Unicast, Multicast IGMP), UPnP,

DNS, DHCP, RTP, RTSP, NTP, IPv4, SNMP, QoS, HTTP, HTTPS, LDAP (client), SSH, SSL, SMTP, FTP, mDNS (Bonjour

• Up to 2 Simultaneous Video Streams

), and 802.1x (EAP)

• Web Viewing, up to 16 Cameras Simultaneously

ExSite IP Series is an explosionproof camera system with a built-in 100Base-TX network interface for live streaming to any network

application.ExSite

IP Series has all of the features and functions

of the original ExSite Series, while allowing you to control and monitor video over an IP network from virtually anywhere in the world.

IP Series supports two simultaneous video streams. The

ExSite

two streams can be compressed in MJPEG, MPEG-4, and H.264 formats across several resolution configurations. The streams can be configured in a variety of frame rates, bit rates, and group of pictures (GOP) structures for additional bandwidth administration. The H.264 compression video files are up to 20 times smaller than MJPEG, making network video storage more affordable.

ExSite IP Series includes a day/night camera with a removable infrared cut filter and 36X zoom lens (36X optical, 12X digital).

The electropolished 316L stainless steel construction makes the ExSite Series ideal for all kinds of environmental conditions including marine applications. The system has an absolute operating temperature range of –60° to 60°C (–76° to 140°F). Within two hours after power-up, the entire unit can de-ice and be operational from a temperature of –25°C (–13°F).

Web Interface

ExSite IP Series uses a standard Web browser for powerful remote

setup and administration. Up to 16 cameras can be viewed on the same network.

Network protocols such as Secure Sockets Layer (SSL) configuration for security certificates, Secure Shell (SSH) for remote logon, and Quality of Service (QoS) for priority or guaranteed data flow can be managed using a Web browser.

Systemization

ExSite IP Series easily connects to Pelco IP systems such as

Endura® version 1.5 (or later), MPEG-4; Endura version 2.0 (or later), H.264; Digital Sentry® version 7.3 (or later); DX8100 version 2.0 (or later); DX4700/DX4800 version 1.1 (or later); DX4700HD/DX4800HD version 2.0 (or later); and DVR5100 version 1.5.4 (or later). The camera also features open architecture connectivity to third-party software. Pelco offers an application programming interface (API) and software developer’s kit (SDK) for interfacing with Pelco’s IP cameras.

International Standards

Organization Registered Firm;

ISO 9001 Quality System

C1311 / REVISED 11-30-16

Page 2

TECHNICAL SPECIFICATIONS

4 PLCS. TYP. 10MM - 1.5MM X 14MM ON A 4.75-INCH DIA. B.C. EQUALLY SPACED

8.52

(3.354)

29.21 (11.5 )

26.8

(10.5

33.27 (13.1)

13.03

(5.13)

12.47 (4.91)

1.91

(0.75 NPT )

FIXED

4 PLCS. TYP. 10MM - 1.5MM X 14MM ON A 4.75-INCH DIA. B.C. EQUALLY SPACED

8.52

(3.354)

14.07 (5.54)

42.01

(16.54)

29.21 (11.5)

18.08

(7.12)

12.47

(4.91)

13.03

(5.13)

33.37 (13.14)

1.91

0.75 NPT )

PAN/TILT

PRODUCT FEATURES

All Models

• Sun Shroud, Heater/Window Defroster, and Blower Included

• Configurable Locations of Labels and On-Screen Displays

• 7 Alarm Inputs

• 3 Relay Outputs

• Built-in Menu System for Setup of Configurable Functions

• Autofocus with Manual Override

• Auto Iris with Manual Override

• NTSC/PAL

• Reliable, Maintenance-Free Brushless DC Stepper Motor and Timing Belt Transmissions for Smooth and Accurate Positioning

Fixed Models

• Manual 200° Pan and 180° Tilt Adjustments

VALUES IN PARENTHESES ARE INCHES; ALL OTHERS ARE CENTIMETERS.

Pan/Tilt Models

• Variable Speed Pan: 0.1° to 40°/Second with Proportional Pan

• 360° Continuous Pan Rotation

• Tilt Range of +90° to –90° from Horizontal

• ±0.1° Preset Accuracy

• Preset Positioning, Patterns, Multiple Scan Modes

• Configurable Power-up Mode

• Configurable Park

• 80 Presets with Custom Camera Settings and Labels

• 8 Zones (configurable in size) Can Be Labeled with Up to 20 Characters Each or Set to Output Blank Video

• Action on Alarm: Alarms can be individually configured for 3 priority levels, to initiate a stored pattern, or to go to an associated preset when received

• Resume After Alarm: Allows the pan/tilt to return to a previously configured state after alarm acknowledgment or to its previous position before alarm

• Patterns: Up to 4, on-screen, user-defined configurable patterns; includes pan, tilt, zoom, and preset functions

• Proportional Pan/Tilt: Continually decreases pan and tilt speeds in proportion to depth of zoom

• Variable Scan Speed: Scan speed can be configurable between 1° and 40°/sec

• Configurable Limit Stops for Auto/Random/Frame Scan Modes

Note: Please contact Pelco for information on the dimensions of the flameproof joints.

Page 3

TECHNICAL SPECIFICATIONS

CAMERA/OPTICS

Day/Night (36X)

Signal Format NTSC, PAL

Scanning System 2:1 interlace

Image Sensor

Effective Pixels

NTSC PAL

Horizontal Resolution

NTSC PAL

Lens f/1.4 (focal length, 3.3 ~ 119 mm optical)

Zoom 36X optical, 12X digital

Configurable Zoom Speed (Optical Range)

Horizontal

Angle of View

Focus

Maximum Sensitivity

NTSC* 0.55 lux at 1/60 sec shutter (color)

PAL*

Sync System Internal/AC line lock, phase adjustable using

White Balance Automatic with manual override

Shutter Speed

NTSC PAL

Iris Control Automatic Iris Control with manual override

Gain Control Automatic/OFF

Video Output 1 Vp-p, 75 ohms

Video Signal-to-Noise Ratio >50 dB

*All values measured at 27 dB gain.

1/4-inch progressive scan CCD

768 (H) x 494 (V) 752 (H) x 582 (V)

540 TV lines 540 TV lines

2.9/4.2/5.8 seconds

57.2° at 3.3 mm wide zoom;

2.5° at 82.8 mm telephoto zoom

Automatic with manual override

0.018 lux at 1/2 sec shutter (color);

0.055 lux at 1/60 sec shutter (B-W);

0.0018 lux at 1/ 2 sec shutter (B-W)

0.45 lux at 1/50 sec shutter (color);

0.015 lux at 1/1.5 sec shutter (color);

0.045 lux at 1/50 sec shutter (B-W);

0.0015 lux at 1/1.5 sec shutter (B-W)

remote control, V-Sync

Automatic (electronic iris)/manual 1/2 ~ 1/30,000 1/1.5 ~ 1/30,000

Page 4

TECHNICAL SPECIFICATIONS

GENERAL

Construction 316L stainless steel Finish Electropolish Viewing Window 12.7 mm (0.50-inch) thick, soda-lime

tempered glass Operating Temperature –60° to 60°C (–76° to 140°F) Storage Temperature –20° to 60°C (–4° to 140°F) Storage Humidity 0% ~ 95% RH (noncondensing) Pan/Tilt

Unit Weight 25 kg (55 lb) Shipping Weight 33 kg (73 lb ) Effective Projected Area (EPA) 40.8 square inches

Fixed

Unit Weight 11.33 kg (24.9 lb) Shipping Weight 18.14 kg (40 lb) Effective Projected Area (EPA) 31.1 square inches

ELECTRICAL

Input Voltage 24 VAC or 100 to 240 VAC, 50/60 Hz Input Voltage Range ±10% Power Consumption Maximum 60 W (120 VA) per system Heater and Defroster Microprocessor controlled Electrical Connections 6-foot pigtail wire harness with connections

for power, network, alarm inputs, and

auxiliary outputs Auxiliary Outputs 3 normally open (N.O.) or normally closed

(N.C.) relays, 32 VDC, 0.5 A; relay 3 is

allocated specifically for an external washer

(not supplied by Pelco) Alarm Inputs 7

MECHANICAL

Cable Entry One 1.91 cm (0.75-inch NPT) threaded

Pan Movement* 360° Continuous pan rotation Vertical Tilt* Unobstructed +90° to –90° Variable Pan/Tilt Speed*

Pan 0.1° to 40°/sec variable-speed operation Tilt 0.1° to 40°/sec variable-speed operation

Preset Speeds*

Pan 40°/sec Tilt 40°/sec

*Only applicable for pan/tilt models.

opening; one explosionproof sealable fitting supplied

CERTIFICATIONS/RATINGS

•FCC

• UL/cUL Listed

• UL/cUL Hazardous Locations Listed per NEC Division and Zone requirement Class I, Groups A, B, C, and D Class II, Groups E, F, G, T6 Class I, Zone 1, AEx d IIC, T6

• Zone 22, AEx tb IIIC T85°C Db

• BR-Ex d IIC, T6, IP66

• UL-BR 13.0060X

• IECEx UL 11.0007X

• Ex d IIC T6 Gb

• Ex tb IIIC T85°C Db IP66

• DEMKO 04 ATEX 0413858X

0539 II 2 G Ex d IIC, T6 Gb

II 2 D Ex tb IIIC T85°C Db IP66

• Tamb –60°C to 60°C

• NEPSI-China, Ex d IIC, T6, Cert No. GYJ16.1188X

•C-Tick

• S Mark for Argentina

•Cisco

Medianet (MSP) compatible

•ONVIF 1.02

• Meets NEMA Type 4X standards

Page 5

TECHNICAL SPECIFICATIONS

VIDEO

Video Encoding H.264 base profile, MPEG-4, and MJPEG Video Streams Up to 2 simultaneous streams; the second

Frame Rate Up to 30, 25, 24, 15, 12.5, 12, 10, 8, 7. 5, 6, 5,

Available Resolutions Resolution MJPEG H.264 Base Profile MPEG-4

Supported Protocols TCP/IP, UDP/IP (Unicast, Multicast IGMP),

Users

Unicast Up to 20 simultaneous users depending on

Multicast Unlimited users H.264 or MPEG-4 Security Access Password protected Software Interface Web browser view and setup, up to

Pelco System Integration Endura 1.5 or later (MPEG-4) or Endura 2.0 or

Open API Pelco API or ONVIF v1.02 Minimum System Requirements

Processor Intel

Operating System Microsoft

Memory 512 MB RAM

Network Interface Card 100 megabits (or greater)

Monitor Minimum of 1024 x 768 resolution, 16- or

Web Browser Internet Explorer

Media Player

†

stream is variable based on the setup of the primary stream

4, 3, 2, 1 (dependent upon coding, resolution, and stream configuration)

Width Height Format

Maximum

IPS

Recommended

Bit Rate

Maximum

IPS

Recommended

Bit Rate

Maximum

IPS

Recommended

704 480 NTSC 30 ips 5.4 Mbps 30 ips 1.9 Mbps 30 ips 2.0 Mbps

352 240 NTSC 30 ips 1.3 Mbps 30 ips 0.5 Mbps 30 ips 0.6 Mbps

704 576 PAL 25 ips 5.4 Mbps 25 ips 1.9 Mbps 25 ips 2.0 Mbps

UPnP, DNS, DHCP, RTP, RTSP, NTP, IPv4, IPv6*, SNMP, QoS, HTTP, HTTPS, LDAP (client), SSH, SSL, SMTP, FTP, mDNS (Bonjour

), and

802.1x (EAP)

resolution settings (2 guaranteed streams)

16 cameras

later (H.264); Digital Sentry 7.3 IP bundle 3 or later; DX8100 Series 2.0 or later; DX4700/DX4800 1.1 or later; DX4700HD/DX4800HD 2.0 or later; and DVR5100 version 1.5.4 or later

Pentium® 4 microprocessor, 1.6 GHz

Windows® XP, Windows Vista®,

Windows 7, or Mac

OS X 10.4 (or later)

32-bit pixel color resolution

Firefox

7.0 (or later) or Mozilla®

3.0 (or later)

Pelco Media Player or QuickTime® 7.6.5 for Windows XP, Windows Vista, or QuickTime

7.6.4 for Mac OS X 10.4

Bit Rate

*Supports mixed IPv4 and IPv6 installations, but not IPv6-only deployments.

†

This product is not compatible with QuickTime version 7.6.4 for Windows XP or Windows Vista. If you have this version installed on your PC, you will need to upgrade to QuickTime version 7.6.5.

Page 6