Page 1
PRODUCT SPECIFICATION
camera solutions
ExSite® Series Explosionproof Positioning System
PAN/TILT SYSTEM WITH IOP CAMERA AND OPTIONAL WIPER
Product Features
• Electropolished 316L Stainless Steel Construction
• Upright or Inverted Operation
• Receiver, Pan/Tilt, and Enclosure with an Integrated Optics
Package(IOP)
• 2 Autofocus, High Resolution Integrated Optic Packages
– 36X Day/Night, 128X Wide Dynamic Range, Motion Detection, and
540 TVL Horizontal Resolution
• Multilingual On-Screen Menus
• Password Protection
• Configurable Camera Settings
• On-Screen Compass, Tilt, and Zoom Display
• Variable Speed Pan: 0.1° to 40°/second with Proportional Pan
• 360° Continuous Pan Rotation
• Tilt Range of +90° to –90° from Horizontal
• Preset Positioning, Patterns, Multiple Scan Modes
• Designed for Minimal Maintenance
• Built-in System Memory
• Software Update and Setup Through Remote Data Port (IPS-RDPE-2)
• Password Protection to Prevent Unauthorized Changes to the System
The ExSite® Pan/Tilt Series are innovative integrated positioning
systems that meet stringent explosionproof requirements. The ExSite
Pan/Tilt Series not only combine a receiver, pan/tilt, and enclosure in
a single, easy-to-install system, but also includes an Integrated Optics
Package (IOP). The Integrated Optics Package contains an autofocus
camera and lens module with configurable features.
The ExSite Pan/Tilt Series features a high resolution day/night
camera with a removable infrared cut filter and a 36X zoom lens
(36X optical, 12X digital).
The electropolished 316L stainless steel construction makes the
ExSite Pan/Tilt Series ideal for all kinds of environmental conditions
including marine applications. The system has an absolute operating
temperature range of –76° to 140°F (–60° to 60°C). Within two hours
after power-up, the entire unit can de-ice and be operational from a
temperature of –13°F (–25°C).
The ExSite Pan/Tilt Series include an optional window wiper. The
wiper is completely integrated into the enclosure and does not
interfere with the viewing range of the system. The wiper can be
configured to delay between wipes and to automatically shut off after
SHOWN WITH WXM100 WALL MOUNT
(NOT SUPPLIED)
• On-Board Connector for
– Pelco VC-UTP Video Converter
– Pelco TXB Series Translator Boards for Use with Hernis and Other
Protocols
– Pelco FS85011A and Third-Party Fiber Optic Transmitters
a specified period. A built-in heater, window defroster/defogger, sun
shroud, and blower are standard features on the ExSite Pan/Tilt
Series. All units also include three auxiliary output relays that can be
configured for a variety of uses.
The ExSite Pan/Tilt Series variable pan and tilt speeds range from
0.1 to 40 degrees per second in manual pan, tilt, and preset mode.
The ExSite Pan/Tilt Series is capable of 360 degrees of continuous
pan rotation. The tilt range allows for horizontal viewing of –90 to
+90 degrees. There are 80 preset positions with a preset accuracy of
±0.1 degree.
The systems are available with an input voltage of 24 VAC or with a
power source of 100 to 240 VAC. The ExSite Pan/Tilt Series also
have a power-up recovery mode that allows the user to specify what
operation the system will resume whenever the power is cycled.
ExSite Pan/Tilt Series feature built-in system memory in the power
module to store camera and location-specific pan/tilt settings,
including labels, presets, patterns, and zones. These settings are
automatically down-loaded if a new pan and tilt body is installed.
International Standards
Organization Registered Firm;
ISO 9001 Quality System
C1300 / REVISED 7-26-12
Page 2
TECHNICAL SPECIFICATIONS
PRODUCT FEATURES
• Integral Multiprotocol Receiver/Driver
• 360° Continuous Pan Rotation, Tilt Range ±90°
• Quick and Easy Installation
• Designed for Minimal Maintenance, No Gears to Adjust
• 2-Year Continuous-Duty Warranty
• Upright or Inverted Installation
SOFTWARE/HARDWARE
• Configurable Power-up Mode
• Configurable Park
• Sun Shroud, Heater/Window Defroster, and Blower All Standard
• 80 Presets with Custom Camera Settings and Labels
• ±0.1° Preset Accuracy
• Multilingual Menus (English, Spanish, Portuguese, Italian, French,
German, Russian, Polish, Turkish, and Czech)
• On-Screen Compass, Tilt, and Zoom Display
• Password Protection
• 8 Zones (configurable in size) Can Be Labeled with Up to 20 Characters
Each or Set to Output Blank Video
• Configurable Locations of Labels and On-Screen Displays
• 7 Alarm Inputs
• 3 Relay Outputs
• Action on Alarm: Alarms can be individually configured for 3 priority
levels, to initiate a stored pattern, or to go to an associated preset when
received
• Resume After Alarm: Allows the pan/tilt to return to a previously
configured state after alarm acknowledgement or to its previous position
before alarm
• Patterns: Up to 4, on-screen, user-defined configurable patterns; includes
pan, tilt, zoom, and preset functions
• Proportional Pan/Tilt: Continually decreases pan and tilt speeds in
proportion to depth of zoom
• Variable Scan Speed: Scan speed can be configurable between 1° and
40°/sec
• Configurable Limit Stops for Auto/Random/Frame Scan Modes
®
• Autosensing Protocol (Coaxitron
, RS-422 Pelco P and Pelco D); Accepts
Competitive Control Protocol with Optional Translator Card
• Built-in Menu System for Setup of Configurable Functions
ALL CAMERAS
• Autofocus with Manual Override
• Auto Iris with Manual Override
• Configurable Settings
• AC Line Lock
• NTSC/PAL
ELECTRICAL
Input Voltage 24 VAC or 100 to 240 VAC, 50/60 Hz
Input Voltage Range ±10%
Power Consumption Maximum 60 W (120 VA) per system
Heater and Defroster Microprocessor controlled
Electrical Connections 6-foot pigtail wire harness with connections
for power, video, data control, alarm inputs,
and auxiliary outputs
Auxiliary Outputs 3 N/O or N/C relays, 32 VDC, 0.5 A. Relay 3 is
allocated specifically for an external washer
(not supplied by Pelco).
Alarm Inputs 7
MECHANICAL
Cable Entry One 0.75-inch (1.91 cm) NPT threaded
Pan Movement 360° Continuous pan rotation
Vertical Tilt Unobstructed +90° to –90°
Variable Pan/Tilt Speed
Pan 0.1° to 40°/sec variable-speed operation
Tilt 0.1° to 40°/sec variable-speed operation
Preset Speeds
Pan 40°/sec
Tilt 40°/sec
11.5 (29.21)
4.91
(12.47)
0.75 NPT
(1.91)
4 PLCS. TYP.
10MM - 1.5MM X 14MM
ON A 4.75-INCH DIA. B.C.
EQUALLY SPACED
opening; one explosionproof sealable fitting
supplied
13.14 (33.37)
5.13
(13.03)
16.54
(42.01)
5.54
(14.07)
7.12
(18.08)
3.354
(8.52)
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;
ALL OTHERS ARE INCHES.
Page 3
TECHNICAL SPECIFICATIONS
GENERAL
Construction 316L stainless steel
Finish Electropolish
Viewing Window 0.50-inch (12.7 mm) thick, soda-lime
Operating Temperature –76° to 140°F (–60° to 60°C)
Unit Weight 55 lb (25 kg)
Shipping Weight 73 lb (33 kg)
Effective Projected Area (EPA) 40.8 square inches
tempered glass
CAMERA/OPTICS
Day/Night (36X)
Signal Format NTSC, PAL
Scanning System 2:1 Interlace
Image Sensor
Effective pixels
NTSC
PAL
Horizontal Resolution
NTSC
PAL
Lens f/1.4 (focal length, 3.3 ~ 119 mm optical)
Zoom 36X optical, 12X digital
Configurable Zoom Speed
(Optical Range)
Horizontal
Angle of View
Focus
Maximum Sensitivity at
35 IRE
NTSC 0.018 lux at 1/2 sec shutter (color)
PAL 0.015 lux at 1/1.5 sec shutter (color)
Sync System Internal/AC line lock, phase adjustable using
White Balance Automatic with manual override*
Shutter Speed
NTSC
PAL
Iris Control Automatic Iris Control with manual override*
Gain Control Automatic/OFF*
Video Output 1 Vp-p, 75 ohms
Video Signal to Noise >50 dB
*Manual control of camera setup functions can be done with CM6700,
CM6800, CM9760, CM9770, CM9780, KBD200A, KBD300A, and MPT9500
controllers. Manual control of cameras cannot be done with CM7500,
MPT9000, or KBD9000 controllers.
1/4-inch Progressive Scan CCD
768 (H) x 494 (V)
752 (H) x 582 (V)
540 TV lines
540 TV lines
2.9/4.2/5.8 seconds
54° at 3.6 mm wide zoom;
2.5° at 82.8 mm telephoto zoom
Automatic with manual override
0.55 lux at 1/60 sec shutter (B-W)
0.00018 lux at 1/2 sec shutter (B-W)
0.45 lux at 1/50 sec shutter (B-W)
0.00015 lux at 1/1.5 sec shutter (B-W)
remote control, V-Sync*
Automatic (electronic iris)/Manual
1/2 ~ 1/30,000*
1/1.5 ~ 1/30,000*
CERTIFICATIONS/RATINGS
•FCC
• UL/cUL Listed
• UL/cUL Hazardous Locations Listed per NEC Division and Zone
requirement
Class I, Divisions I and II, Groups A, B, C, and D
Class II, Divisions I and II, Groups E, F, G, T5
Class I, Zone 1, AEx d IIC, Ex d IIC, T5
• AEx tD 21 T105°C
• 04/UL-BRAE-0027
BR-Ex d IIC, T5, IP66
• IECEx UL 11.0007X
• DEMKO 04 ATEX 0413858X
0539 II 2 G Ex d IIC, T5
II 2 D Ex tD A21 IP66 T105°C
• Tamb –60°C to 60°C
• NEPSI-China, Ex d IIC, T5, Cert No. GYJ05584
•C-Tick
• S Mark for Argentina
• Meets NEMA Type 4X standards
• Lloyd’s Register Type Approval: Marine, offshore, and industrial
installations for use in environmental categories ENV1, ENV2, and ENV5;
Certificate No. 06/60001
Page 4
MOUNTING ACCESSORIES
MODELS
WXM100 Wall mount designed to mount the
ExSite Series system directly to a
load-bearing vertical surface
PXM100 Pedestal mount designed to mount an
ExSite Series system directly to a horizontal
surface in either an upright or inverted
position
CMXM100 Corner adapter for use with the WXM100 to
mount an ExSite Series system to the corner
of a structure
PAXM100 Pole adapter for use with the WXM100 to
mount a system to a vertical pole or with a
PXM100 to mount a system to a horizontal
pole; recommended pole diameter is
4 to 9 inches (10.16 to 22.86 cm)
GENERAL
Construction
Mounts Electropolished 304 stainless steel
PAXM100 Mounting Straps 316 stainless steel
Maximum Load
WXM100 73 lb (33.00 kg)
CMXM100 85 lb (38.50 kg)
PAXM100 88 lb (40.00 kg)
PXM100 79 lb (35.83 kg)
Unit Weight
WXM100 12.4 lb (5.62 kg)
CMXM100 7.6 lb (3.45 kg)
PAXM100 9.2 lb (4.17 kg)
PXM100 1.3 lb (0.60 kg)
Shipping Weight (approximate)
WXM100 17 lb (7.71 kg)
CMXM100 13 lb (5.89 kg)
PAXM100 14 lb (6.35 kg)
PXM100 4 lb (1.81 kg)
MECHANICAL
Mounting Method
WXM100, CMXM100*,
and PXM100
PAXM100* Steel pole with a diameter
* Five 3/8-16 x 1.0-inch thread length, stainless steel hex head bolts with lock washers are supplied with the CMXM100 and PAXM100 to be used with
the WXM100 wall mount or PXM100 pedestal mount.
Recommended
Mounting Surface
Solid concrete with the
recommended strength of
3,600 psi or 25 Mpa
Steel I beam with a
minimum of 1/8-inch wall
of 4 to 9 inches
(10.16 to 22.86 cm)
Recommended Hardware
Five 3/8-16 x 1-9/16-inch long stainless steel drop-in anchors and five 3/8-16 x 1.0-inch
thread length, stainless steel hex head bolts with stainless steel lock washers (not supplied)
Five 3/8-16 x 1.0-inch thread length, stainless steel hex head bolts with stainless steel lock
washers and 3/8-16 stainless steel nuts (not supplied)
Four 5/8-inch wide x 40-inch (101.6 cm) long stainless steel straps to attach the adapter to a
pole (supplied)
WXM100 WALL MOUNT
8X 0.433 THRU EQ SP
Ø
ON A 4.75 B.C.
8.00
(20.32)
14.95
(37.97)
7.00
(17.78)
5X Ø 0.422
5.74
3.50
(8.89)
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS; ALL OTHERS ARE INCHES.
(14.58)
Page 5
MOUNTING ACCESSORIES
PXM100 PEDESTAL MOUNT
CMXM100 CORNER ADAPTER
4X 0.433 THRU
Ø
EQ SP ON A 4.75 B.C.
Ø
4X 0.433 THRU
Ø
EQ SP ON A 7.00 B.C.
4X 0.413 THRU EQ SP
Ø
ON A 7.00 B.C.
Ø
8.00
(20.3)
Ø
4X 0.433 THRU
Ø
EQ SP ON A 7.25 B.C.
9.25
(23.5)
0.538
Ø 6.25
(15.87)
8.15
(20.7)
Ø 5.68
(14.42)
0.60
(0.15)
Ø
(1.37)
Note: Designed for use with a WXM100 wall mount.
PAXM100 POLE ADAPTER
14.9
(37.8)
5X THREADED HOLES
FOR 3/8-16 SS BOLTS (SUPPLIED)
11 X THREADED HOLES
FOR 3/8-16 SS BOLTS (SUPPLIED)
10.00
(25.4)
(14.1)
3.28
(8.33)
5.5
3.5
(8.9)
Note: Designed for use with a WXM100 to mount a system to a vertical pole or a
PXM100 to mount the system to a horizontal pole. Recommended pole diameter is
4 to 9 inches (10.16 to 22.86 cm).
8.50
(21.6)
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS; ALL OTHERS ARE INCHES.
Page 6
MODEL NUMBERS
SYSTEM MODEL NUMBERS
Model Format 24 VAC 100-240 VAC
36X
Day/
Night
Standard
With Wiper
NTSC
PAL
NTSC
PAL
COMPONENT MODEL NUMBERS
Power Module
IPSXM-2 24 VAC
IPSXM-7 100 to 240 VAC
PTZ Camera Module
IPSXMPT30
No Wiper
IPSXMPT31
With Wiper
OPTIONAL ACCESSORIES
TXB Series* Translator boards for AD Manchester, Hernis,
IPS-CABLE Remote monitor cable and software kit.
IPS-RDPE-2* Remote data port. 24 VAC, wall/pole mount
EXAC JUNCTION BOX
®
Bosch
(Philips®, Burle), Sensormatic®,
TASS, Vicon
video/data breakout box. Allows ground-level
control/configuration when used with the
IPS-CABLE.
9.31 (23.65)
IPSXM3036-2
IPSXM3036-2X
IPSXM3136-2
IPSXM3136-2X
IPSXM3036 Day/Night (NTSC) camera (420X) no wiper
IPSXM3036X Day/Night (PAL) camera (420X) no wiper
IPSXM3136 Day/Night (NTSC) camera (420X) with wiper
IPSXM3136X Day/Night (PAL) camera (420X) with wiper
™
, and NTCIP™ protocols.
IPSXM3036-7
IPSXM3036-7X
IPSXM3136-7
IPSXM31367X
VC-UTP Converts video for use with unshielded
twisted pair (UTP); cannot be used
simultaneously with TXB translator boards.
FS85011A Series* Factory-installed fiber transmitter sends one
unidirectional composite video channel and
one bidirectional data channel over on
multimode or single-mode fiber optic cable.
EXAC Factory-installed increased safety (Ex e)
potted cable interface and junction box with
screw-down terminal for quick connection
and easy installation.
*If TXB or FS85011A boards are installed, remote upload of system software
will not be possible.
EXAC MOUNTING BRACKET
0.22 (0.55)
8.52 (21.65)
6.16 (15.65)
Pelco by Schneider Electric
3500 Pelco Way, Clovis, California 93612-5699 United States
USA & Canada Tel (800) 289-9100 Fax (800) 289-9150
International Tel +1 (559) 292-1981 Fax +1 (559) 348-1120
www.pelco.com
3.58 (9.09)
6.95 (17.65)
0.10 (0.25)0.98 (2.50)
0.49 (1.25)
0.31 (0.80)
1.59 (4.05)
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS; ALL OTHERS ARE INCHES.
Pelco, the Pelco logo, and other tradema rks associated with Pelco products referred
to in this publication are trademarks of Pelco, Inc. or its affiliates. All other
product names and services are the p roperty of their respective companies.
Product specifications and availability are subject to change without notice.
Ø 0.28 (0.70)
0.91
1.71 (4.35)
0.28 (0.70)
0.39 (1.00)
0.57 (1.45)
©Copyright 2012, Pelco, Inc. All rights reserved.
(2.30)
Loading...