PRODUCT SPECIFICATION
IPS-RDPE-2
REMOTE DATA PORT
IPS-CABLE
REMOTE MONITOR CABLE
camera solutions
Spectra®, ExSite®, and Esprit® Positioning Systems
REMOTE INSTALLATION/SERVICE TOOLS
Product Features
Remote Data Port (IPS-RDPE-2)
• Designed to Provide Ground Level, Local Interface to Spectra* and
ExSite/Esprit Series Systems When Using IPS-CABLE
• Mounts to a Pole or Wall Near Positioning System
• One Remote Data Port is Required Per Positioning System
Remote Monitor Cable (IPS-CABLE)
• Serial Interface Cable for a Windows®-Based PC
• Connects to Spectra* Dome Drive or IPS-RDPE-2
• Plugs into Data Port of Spectra Mini Dome System When Used with
IPS-MINIADPT Adapter Cable
Pelco’s remote data port
(IPS-CABLE)
installation and servicing of Spectra®, ExSite®, Esprit®, or any pan/tilt
that uses Pelco’s D protocol. Use these tools at the installation site to
verify the operation of the PTZ controls, check the address and baud
settings, and program the positioning system. Software upgrades
also can be performed with Spectra/Spectra Mini domes and ExSite
systems.
The
IPS-CABLE
to the RJ-45 port of the
IPS-CABLE
upgrade capabilities. When used with an
IPS-CABLE
and program a Spectra, ExSite, or Esprit positioning system or any
other system that accepts Pelco D protocol. It is compatible with most
serial cable/connectors for Windows
are field service tools designed to assist in the
can be connected to a PC or PDA and monitor directly
and the supplied software allow full control, setup, and
also allows the user to control pan/tilt/zoom functions
(IPS-RDPE-2)
IPS-RDPE-2
and remote monitor cable
or the Spectra dome drive. The
®
-based PCs.
IPS-RDPE-2,
the
The
IPS-RDPE-2
IPS-CABLE
Spectra, ExSite, and Esprit Series systems. The
remote data port brings all the functionality of the
to ground level. The remote data port works with
IPS-RDPE-2
compatible with coaxial video and UTP video control systems using
†
Pelco D, Pelco P, or Coaxitron
The
IPS-MINIADPT
with the
IPS-CABLE
®
protocols.
adapter cable can be ordered separately for use
shipped prior to the introduction of the
Spectra Mini dome system.
is
*IPS-RDPE-2 and IPS-CABLE are compatible with Spectra III
™
Series
and newer model dome systems. Spectra II® and previous dome
systems do not support these products.
†
Online software upgrades are available at
www.pelco.com
International Standards
Organization Registered Firm;
ISO 9001 Quality System
C2453 / REVISED 12-2-10
.
TECHNICAL SPECIFICATIONS
MODELS
IPS-CABLE Remote monitor cable
IPS-RDPE-2 Remote data port for monitoring at ground level
IPS-CABLE
ELECTRICAL
Connectors
Receiver One RJ-45 serial interface connector
Video One BNC, male connector
Control One serial DB-9 female connector
GENERAL
Length 48" (122 cm)
IPS-RDPE-2
ELECTRICAL
Input Voltage 24 VAC
Power Consumption 1 VA
MECHANICAL
Construction Aluminum
Finish Gray polyester powder coat
Cable Entry Two hole plugs; will accommodate 3/4-inch
Mount Method Four 0.375-inch (0.95 cm) holes on mounting
Latch One stainless steel link-lock latch secured with
GENERAL
Environment Indoor/outdoor
Operating Range –50° to 122°F (–45° to 50°C)
Unit Weight 2.4 lb (1.1 kg)
Shipping Weight 8.0 lb (3.63 kg)
(1.91 cm) conduit
plate
screw; latch also can be secured with padlock
(not supplied)
7.65
(19.4)
(10.3)
4.01
7.32
(18.8)
6.63
(16.8)
6.71
(17.0)
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;
ALL OTHERS ARE INCHES.
4.50
(11.4)
6.50
(16.5)
OPTIONAL ACCESSORY
PA402 Pole mount adapter
CERTIFICATIONS/RATINGS
• CE, Class B
• FCC, Class B
• UL/cUL Listed
• Meets NEMA Type 4X standards
Pelco by Schneider Electric
3500 Pelco Way, Clovis, California 93612-5699 United States
USA & Canada
International
www.pelco.com
Tel (800) 289-9100 Fax (800) 289-9150
Tel +1 (559) 292-1981 Fax +1 (559) 348-1120
Pelco, the Pelco logo, and other trademarks associated with Pelco products referred
to in this publication are trademarks of Pelco, Inc. or its affiliates. All other
product names and services are the property of their respective companies.
Product specifications and availability are subject to change without notice.
©Copyright 2010, Pelco, Inc. All rights reserved.