Pelco IOP-30, IOC-30 Specsheet

PRODUCT SPECIFICATION

Esprit® HD Series IP Positioning System

ES5230 SERIES STANDARD AND PRESSURIZED MODELS

Product Features

• Up to 1920 x 1080 Resolution

• 16:9 Aspect Ratio; 1080p at 30 Images per Second (ips)

• 2.0 Megapixel (MPx), 30X Optical Zoom, 12X Digital Zoom,

Wide Dynamic Range (WDR) Camera

• Ability to Control and Monitor Video Over IPv4 and IPv6 Networks

• Built-in Analytics Including AutoTracker and Adaptive Motion

Detection

• 2 Simultaneous Video Streams: Dual H.264 or H.264 and Scalable

MJPEG

• 360° Continuous Pan Rotation at 100° per Second

• Supported Protocols: TCP/IP, UDP/IP (Unicast, Multicast IGMP), UPnP,

DNS, DHCP, RTP, RTSP, NTP, and More

• Electronic Image Stabilization (EIS)

• Pan/Tilt and Enclosure with Integrated Optics Package (IOP) or

Pressurized Integrated Optics Cartridge (IOC)

• 16 Preset Tours, 256 Presets, 32 Window Blanks

• Integrated Window Wiper with Configurable Delay and Shut-Off

(ES5230-1x Models)

• Open IP Standards

• ONVIF Profile S Conformant

camera solutions

Network Positioning System

Pelco takes its industry-leading Esprit® Series positioning system
into the world of high definition. Esprit HD delivers crystal-clear, live
streaming images over the Internet using a standard Web browser
(Microsoft

®

Internet Explorer® or Mozilla® Firefox®). With six times
the resolution of standard definition positioning systems, Esprit HD
is an ideal solution to view details such as faces, license plates,
tattoos, or other specific features.

Esprit HD supports High-Profile H.264 compression, a vast
improvement in quality over MPEG-4 and 20 times more efficient
than MJPEG. The positioning system features open architecture
connectivity for third-party software recording solutions allowing
integration into virtually any IP-based HD system. It is also
compatible with Digital Sentry
all Pelco IP camera solutions, Esprit HD is Endura Enabled
manage, configure, and view multiple live streams. When connected
to an Endura

®

HD network-based video security system, the

positioning system has access to EnduraStor

®

video management systems. As with

™

and EnduraView™ for

™

to record,

optimized image quality and bandwidth efficiency.

Built-In Analytics

Pelco Analytics enhance the flexibility and performance of Esprit HD.
Nine Pelco behaviors are preloaded and included as standard
features. Pelco behaviors can be configured and enabled using a
standard Web browser, and they are compatible with Endura or a
third-party system that supports alarms using Pelco’s API.

Web Interface

Esprit HD uses a standard Web browser for powerful remote setup
and administration.

Window Blanking

Window blanking is used to conceal user-defined privacy areas that
cannot be viewed by an operator. Esprit HD supports up to 32 blanked
windows. A blanked area will appear on the screen as a solid gray
window.

Video Systemization

Esprit HD easily connects to Pelco IP and hybrid systems such as
Endura version 2.0 (or later) and Digital Sentry version 7.3 (or later).
The camera is also compatible with Digital Sentry NVs (DS NVs), a
full-featured video management software, which is available as a
free download at www.pelco.com. DS NVs includes four free Pelco IP
licenses and allows for the management of video from up to
64 cameras.

Esprit HD features open architecture connectivity to third-party
software. Pelco offers an application programming interface (API)
and software developer’s kit (SDK) for interfacing with Pelco’s IP
cameras.

International Standards

Organization Registered Firm;

ISO 9001 Quality System

C4008 / REV 4-19-17

TECHNICAL SPECIFICATIONS

Pelco’s ES5230 Esprit® HD Positioning System features a pan/tilt,
enclosure, and either an Integrated Optics Package (IOP) or a
pressurized Integrated Optics Cartridge (IOC) in a single, easy-to­install system. Options include IOP with or without wiper and IOC
models with wiper.

A powder-coated, aluminum construction makes the ES5230 Series
ideal for either indoor or outdoor applications. The system has an
absolute operating temperature range of –45° to 50°C (–50° to
122°F). Within two hours after power-up, the entire unit can de-ice
and be operational from a temperature of –25°C (–13°F).

The ES5230 Series variable pan and tilt speeds range from 0.1 to 40
degrees per second in manual pan mode, and 0.1 to 30 degrees per
second in manual tilt. Pan preset and turbo speeds are 100 degrees
per second. Tilt preset speed is 30 degrees per second.

The ES5230 Series system’s IOC contains dry nitrogen pressurized to
10 psig, which protects the environment inside the cartridge
eliminating internal condensation and corrosion. Sensors strategi­cally placed in the cartridge send an “Alert” message if pressure
drops below factory-set acceptable limits. The IOC is factory assem­bled and installed in the ES5230 Series systems. All labor intensive
procedures of setting up the camera, lens and charging the unit with
dry nitrogen are eliminated. The miniature size of the cartridge
decreases the future need for maintenance and increases the overall
reliability of the pressurized unit.

Many models include a window wiper. The wiper is completely
integrated into the enclosure and does not interfere with the viewing
range of the system. The wiper can be configured to delay between
wipes and to automatically shut off after a specified period. The wiper
design also allows for easy replacement of the wiper blade. A built-in
heater, window defroster/defogger, sun shroud, and insulation
blanket are standard features on the ES5230 units, which also
includes an open collector auxiliary output to control external devices.

The systems are available with an input voltage of 24 VAC or with a
selectable power source of 120/230 VAC. The ES5230 Series also
has a power-up recovery mode that allows the user to specify what
operation the system will resume whenever the power is cycled.

Electronic Image Stabilization (EIS)

Electronic image stabilization (EIS) is a feature of the camera that
can help compensate for some frequencies of vibration. In all cases,
care should be taken to ensure that any positioning system is
mounted to a rigid location.

The default for EIS is OFF. The user can turn EIS ON if vibration is
affecting image quality. Although EIS can reduce the impact of
vibration on image quality, it cannot correct for all levels of vibration.
Other measures should be taken to isolate the camera from the
source of the vibration or to seek a more rigid mounting location.

PELCO ANALYTICS

ES5230 Series includes nine user-configurable behaviors. The
camera is capable of running up to three behaviors at the same time;
although, the number of behaviors is limited to the available
processing power of the camera and the type of analytic being used.

Note: Available processing power is determined by the settings for
compression standards, resolution, image rate, bit rate, and analytic
configuration.

For each behavior, you can create several custom profiles that
contain different camera settings. With these profiles, you can set up
different scenarios for the behavior, which will automatically detect
and trigger alarms when specific activity is detected.

Pelco Analytics are configured and enabled using a standard Web
browser, and Pelco behavior alarms are compatible with Endura or a
third-party system that supports Pelco’s API system.

Multiple Pelco behaviors can be scheduled to work during a certain
time or condition. For example, during the day, a camera can be
configured with Object Counting to count the number of people that
enter a lobby door. At night, the operator can change the profile to
Camera Sabotage to trigger an alarm if a camera is moved or
obstructed. Available Pelco behaviors include:

• Abandoned Object: Detects objects placed within a defined zone and
triggers an alarm if the object remains in the zone longer than the
user-defined time allows. An airport terminal is a typical installation for
this behavior. This behavior can also detect objects left behind at an
ATM, signaling possible card skimming.

• Adaptive Motion Detection: Detects and tracks objects that enter a scene
and then triggers an alarm when the objects enter a user-defined zone.
This behavior is primarily used in outdoor environments with light traffic
to reduce the number of false alarms caused by environmental changes.

• AutoTracker: Detects and tracks movement in the field of view. When the
AutoTracker behavior is configured, the system automatically pans and
tilts to follow the moving object until the object stops or disappears from
the monitored area.

• Camera Sabotage: Detects contrast changes in the field of view. An
alarm is triggered if the lens is obstructed by spray paint, a cloth, or a
lens cap. Any unauthorized repositioning of the camera also triggers an
alarm.

• Directional Motion: Generates an alarm in a high traffic area when a
person or object moves in a specified direction. Typical installations for
this behavior include an airport gate or tunnel where cameras can detect
objects moving in the opposite direction of the normal flow of traffic or an
individual entering through an exit door.

• Loitering Detection: Identifies when people or vehicles remain in a
defined zone longer than the user-defined time allows. This behavior is
effective in real-time notification of suspicious behavior around ATMs,
stairwells, and school grounds.

• Object Counting: Counts the number of objects that enter a defined zone.
This behavior can be used to count the number of people at a store
entrance/exit or inside a store where the traffic is light. This behavior is
based on tracking and does not count people in a crowded setting.

• Object Removal: Triggers an alarm if an object is removed from a
user-defined zone. This behavior is ideal for customers who want to
detect the removal of high value objects, such as a painting from a wall or
a statue from a pedestal.

• Stopped Vehicle: Detects vehicles stopped near a sensitive area longer
than the user-defined time allows. This behavior is ideal for airport
curbside drop-offs, parking enforcement, suspicious parking, traffic lane
breakdowns, and vehicles waiting at gates.