®
IOP08 Series
Intercept
®
Camera and Lens
Installation/
Operation Manual
C1441M-D (1/98)
Pelco • 3500 Pelco Way, Clovis • CA 93612-5699 USA • www.pelco.com
In North America and Canada: Tel (800) 289-9100 or FAX (800) 289-9150
International Customers: Tel (1-559) 292-1981 or FAX (1-559) 348-1120
CONTENTS
Section Page
1.0 GENERAL3
1.1 IMPORTANT SAFEGUARDS AND WARNINGS ............................... 3
2.0 DESCRIPTION ..........................................................................................4
2.1 MODELS ............................................................................................ 4
3.0 INSTALLATION .......................................................................................... 5
3.1 ADJUSTMENTS ............................................................................... 5
3.1.1 Back Focus ............................................................................. 6
3.1.2 Shutter Speed ......................................................................... 6
3.1.3 Auto Gain Control ................................................................... 6
3.1.4 White Balance (ATW/AWB Switch) .........................................6
3.1.5 V-Phase (Vertical Phase) ........................................................ 7
3.1.6 Auto Iris ................................................................................... 7
4.0 SERVICE ................................................................................................... 9
5.0 WIRING DIAGRAM ...................................................................................10
6.0 SPECIFICATIONS .................................................................................... 11
7.0 WARRANTY AND RETURN INFORMATION ........................................... 12
LIST OF ILLUSTRATIONS
Figure Page
1 Back Focus Adjustment ..................................................................... 5
2 Color Camera Adjustments ................................................................ 8
3 Black and White Camera Adjustments............................................... 8
4 Camera/Lens Removal and Installation ............................................. 9
5 Schematic Diagram for Color Camera/Lens .....................................10
LIST OF TABLES
Table Page
A Shutter Speeds ..................................................................................8
REVISION HISTORY
Manual # Date Comments
C1441M 9/95 Original version.
C1441M-A 10/95 Part number changes incorporated. IOP08SXX and
C1441M-B 11/96 Added IOP08B3X/IOP08B4X Series. Replaced Figure 7
C1441M-C 1/98 Revised manual to reduce the number of models.
C1441M-D 1/98 Changed model numbers, revised Figure 1, and
IOP08SXX-PAL changed to IOP083X and IOP084X,
respectively. Sections 6.4 and 6.5 updated with
adjustment instructions. Figures 6 and 7 updated.
with new art for black and white cameras and lenses.
Moved shutter speed settings from Figure 7 to Table A.
Revised dimensions in Figures 1 and 2.
Changed to new format.
removed exploded assembly diagram. Changed manual
pagination.
2 Pelco Manual C1441M-D (1/98)
1.0 GENERAL
1.1 IMPORTANT SAFEGUARDS AND WARNINGS
Prior to installation and use of this product, the following WARNINGS should be
observed.
1. Installation and servicing should only be done by Qualified Service Personnel
and conform to all Local codes.
2. Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X, 6, or
6P enclosure, it is designed for indoor use only and it must not be installed
where exposed to rain and moisture.
3. Only use replacement parts recommended by Pelco.
4. After replacement/repair of this unit’s electrical components, conduct a resistance measurement between line and exposed parts to verify the exposed
parts have not been connected to line circuitry.
5. The installation method and materials should be capable of supporting four
(4) times the weight of the enclosure, pan/tilt, camera and lens combination.
The product and/or manual may bear the following marks:
This symbol indicates that dangerous voltage constituting a
risk of electric shock is present within this unit.
This symbol indicates that there are important operating and
maintenance instructions in the literature accompanying this
unit.
CAUTION:
RISK OF
ELECTRIC SHOCK.
DO NOT OPEN.
TO REDUCE THE RISK OF ELECTRICAL SHOCK,
DO NOT REMOVE COVER. NO USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
CAUTION:
Please thoroughly familiarize yourself with the information
in this manual prior to installation and operation.
Pelco Manual C1441M-D (1/98) 3
2.0 DESCRIPTION
The IOP08 Series of cameras and lenses is part of the IDS08 Intercept® Series of
domes. The IDS08 Series is an integral system that includes a back box (BB08),
dome drive (DD08), dome receiver/driver (DRD08), and imager/optics package
(IOP08).
For installation and operation instructions for the back box, refer to manual C456M-D;
for the dome drive, refer to C416M-C; and for the dome receiver/driver, refer to
manual C466M-E.
2.1 MODELS
The following cameras with integral lens are for use in IDS08 Intercept® series domes.
IOP08B3ZM10 High resolution monochrome (EIA) camera with 10X zoom lens
IOP08B3ZM10P Same as IOP08B3ZM10 except with presets
IOP08B3ZM6 High resolution monochrome (EIA) camera with 6X zoom lens
IOP08B3ZM6P Same as IOP08B3ZM6 except with presets
IOP08B3ZV10 High resolution monochrome (EIA) camera with 10X zoom lens
IOP08B3ZV10P Same as IOP08B3ZV10 except with presets. (UL)
IOP08B3ZV6 High resolution monochrome (EIA) camera with 6X zoom lens
IOP08B3ZV6P Same as IOP08B3ZV6 except with presets. (UL)
IOP08C3ZM10 High resolution color (NTSC) camera with 10X zoom lens
IOP08C3ZM10P Same as IOP08C3ZM10 except with presets
IOP08C3ZM6 High resolution color (NTSC) camera with 6X zoom lens
IOP08C3ZM6P Same as IOP08C3ZM6 except with presets
IOP08C3ZV10 High resolution color (NTSC) camera with 10X zoom lens with
(UL)
(UL)
with auto iris. (UL)
with auto iris. (UL)
auto iris
IOP08C3ZV10P Same as IOP08C3ZV10 except with presets
IOP08C3ZV6 High resolution color (NTSC) camera with 6X zoom lens with
IOP08C3ZV6P Same as IOP08C3ZV6 except with presets
auto iris
4 Pelco Manual C1441M-D (1/98)