Pelco IMPS110-ERBASE, IMPS110-1ERS, IMPS110-1ERP, IMPS110-1ERI, IMP319-ERBASE Specsheet

...
PRODUCT SPECIFICATION
camera solutions
Sarix® IMP Series Environmental Mini Domes with IR
STD DEF/MEGAPIXEL, H.264, DAY/NIGHT IP DOMES
Product Features
Up to 5 Megapixel (MPx) Resolution
Up to 30 Images per Second (ips) at 1080p
Autofocus Motorized Remote Zoom Lens
Integrated Adaptive IR Illumination
Accessible Edge Storage with Micro SD Card
Motion Detection and Camera Sabotage Detection
Operating Temperature from –45° to 50°C (–50° to 122°F)
Power over Ethernet (PoE) and 24 VAC Power Input
Compatible with Pelco and Third-Party Video Systems
ONVIF Profile S and Profile G Conformant
3-Year Warranty and Support
Sarix Professional Range
Powerful, versatile, and affordable, the Sarix® Professional (P) range cameras pack the most popular features and functionality of Sarix technology into a wide range of indoor and environmental options, including IP box cameras, bullet cameras, and domes. Mix and match the performance options and form factor you need for almost any lighting condition, environment, and application.
Camera
Within the Sarix Professional range, the Sarix IMP Series mini dome cameras feature a remote zoom lens for wide angle or long range surveillance needs. Autofocus capability ensures the camera can be automatically refocused when needed. Additionally, the Sarix IMP Series features advanced color science, a mechanical IR cut filter, and advanced integrated adaptive IR illumination for increased sensitivity in low-light installations.
Video
Sarix Professional range cameras support up to two simultaneous
video streams and a third service stream. The two streams can be compressed with efficient H.264 High or Main profiles or MJPEG formats. The streams can be configured to a variety of frame rates and variable bit rates to optimize image quality with bandwidth and storage efficiency.
Edge Storage
Sarix Professional range cameras feature onboard edge storage
with a micro SD card. Video clips of varying lengths can be stored to the card upon alarm, or video can be written continuously to the SD card in the case of network outage. Video can be retrieved from the card through the FTP protocol or by using an ONVIF Profile G enabled client.
Sarix Professional range cameras feature simple motion detection algorithms allowing the camera to record or send an alarm when there is motion in selected zones or in an entire scene. A camera sabotage alarm is triggered if the lens is obstructed or when the camera is repositioned.
Open and Integrated
Sarix Professional range cameras seamlessly connect to Pelco
video management systems such as Endura® version 2.0 (or later) and Digital Sentry cameras integrate with major third-party video management systems through the Pelco API and other third-party software and systems through the open ONVIF Profile S and Profile G standards.
®
version 7.3 (or later). Sarix Professional range
Standard Web Interface
Pelco cameras use a standard Web browser interface for easy remote setup and administration. Controls are optimized for convenient one-step camera configuration for features including color, exposure, flicker control, and streaming.
International Standards
Organization Registered Firm;
ISO 9001 Quality System
C3952 / REVISED 12-17-15
TECHNICAL SPECIFICATIONS
VALUES IN PARENTHESES ARE INCHES; ALL OTHERS ARE CENTIMETERS.
Ø 15.00 (5.90)
18.04 (7.10)
8.50
(3.34)
Ø 9.66
(3.80)
Ø 2.69 (1.06)
BACK BOX FEATURES
8.88
(3.49)
Ø 9.66
(3.80)
Ø 15.52 (6.11)
13.88 (5.46)
Environmental IR, In-Ceiling
• Clearance Above Ceiling 10.16 cm (4 in.)
• Maximum Ceiling Thickness 3.81 cm (1.5 in.)
• 3/4-Inch NPT or 25 mm Conduit Attachments On Side and Top of Back Box
• IP66 Ingress Protection
• NEMA Type 4X
• NEMA TS-2 (Temp.) para 2.2.7.3 - 2.2.7.7
• IK10 (20J) Impact Resistance
• Plenum Rated Back Box
Environmental IR, Surface Mount
• Attaches to Standard 4-Inch Square Outlet Box and Standard 2-Gang Electrical Box
• 3/4-Inch NPT or 25 mm Conduit Attachments On Side and Top of Back Box
• IP66 Ingress Protection
• NEMA Type 4X
• NEMA TS-2 (Temp.) para 2.2.7.3 - 2.2.7.7
• IK10 (20J) Impact Resistance
Ø 9.66
(3.80)
Ø 15.00 (5.90)
Environmental IR, Pendant
• 1.5-Inch NPT Thread for Use with Pelco Wall Mounts
18.54
• IP66 Ingress Protection
(7.30)
• NEMA Type 4X
• NEMA TS-2 (Temp.) para 2.2.7.3 - 2.2.7.7
• IK10 (20J) Impact Resistance
TECHNICAL SPECIFICATIONS
CAMERA
Imaging Device MPx Sensor Maximum Resolution
5 MPx 1/3.2-inch 2592 x 1944 (5.0 MPx)
3 MPx 1/3-inch 2048 x 1536 (3.1 MPx)
2 MPx 1/3-inch 1920 x 1080 (2.1 MPx)
1 MPx 1/4-inch 1280 x 720 (0.9 MPx)
SD 1/4-inch 800 x 600 (0.5 MPx)
Imager Type CMOS Imager Readout Progressive scan Electronic Shutter Range 1 ~ 1/8,000 sec Electronic Wide Dynamic Range 65 db White Balance Range 2,500° to 8,000°K Digital Noise Reduction Yes (ON/OFF selectable) Signal to Noise Ratio 50 dB
Minimum Illumination
Mechanical IR Cut Filter Yes (AUTO/MANUAL selectable), with different set points on lux IR Illumination Adaptive IR up to 25 m; auto ON in night mode, or OFF
MPx Sensitivity
5 MPx f/1.2 0.30 lux 0.02 lux 0.00 lux 0.00 lux
3 MPx f/1.2 0.30 lux 0.02 lux 0.00 lux 0.00 lux
2 MPx f/1.2 0.30 lux 0.02 lux 0.00 lux 0.00 lux
1 MPx f/1.4 0.30 lux 0.02 lux 0.00 lux 0.00 lux
SD f/1.4 0.30 lux 0.02 lux 0.00 lux 0.00 lux
Color Mono - with IR Illumination
33 ms 200 ms 33 ms 200 ms
LENS
Lens Type Built-in; varifocal Focal Length f/1.2, 3 ~ 9 mm; f/1.4, 2.8 ~ 10 mm Focus Autofocus, motorized Zoom Remote Auto Iris Type DC drive lens
Maximum Field of View* MPx
5
3
2
1
SD
*Field of view may vary with changes in resolution settings.
Focal
Length
Wide 4:3 112° 88° 64°
Tele 4:3 37° 30° 22°
Wide 4:3 111° 87° 64°
Tele 4:3 37° 30° 22°
Wide 4:3 85° 67° 49°
Tele 4:3 29° 23° 17°
Wide 16:9 94° 81° 44°
Tele 16:9 32° 28° 16°
Wide 4:3 74° 58° 41°
Tele 4:3 23° 19° 14°
Wide 16:9 84° 71° 37°
Tele 16:9 26° 22° 13°
Wide 4:3 74° 58° 41°
Tele 4:3 23° 19° 14°
Mode
(Aspect Ratio)
Diagonal Horizontal Vertical
Angle of View
TECHNICAL SPECIFICATIONS
VIDEO
Video Streams Up to 2 simultaneous streams, plus service stream; the secondary stream is variable based on the setup of the primary stream Text Overlay Camera name, time, date, and customizable text with multiple supported languages
Available Resolutions MPx Width Height Aspect Ratio
5.0 2592 1944 4:3
3.1 2048 1536 4:3
2.1 1920 1080 16:9
1.9 1600 1200 4:3
1.2 1280 960 4:3
0.9 1280 720 16:9
0.6 1024 576 16:9
0.5 960 540 16:9
0.5 800 600 4:3
0.3 640 480 4:3
0.1 320 240 4:3
0.1 320 180 16:9
Frame Rates MPx Images per Second (ips)
5 MPx 12 (full), 10, 5, 1 3 MPx 20 (full), 16.67, 15, 12.5, 10, 5, 1 2 MPx 30 (full), 25, 20, 16.67, 15, 12.5, 10, 5, 1 1 MPx 30 (full), 25, 20, 16.67, 15, 12.5, 10, 5, 1
SD 30 (full), 25, 20, 16.67, 15, 12.5, 10, 5, 1
Note: Available frame rates are selectable for each independent stream depending on the coding, resolution, and stream configuration.
Video Encoding H.264 High or Main profiles; and MJPEG Bit Rate Control Constant bit rate (CBR), constrained variable bit rate (CVBR) with configurable maximum value Service Stream 640 x 480 or 640 x 352; 2 ips, JPEG Window Blanking 4 configurable windows
AUDIO
Streaming Dual-channel Input Line in/terminal block Encoding G.711 A-law/G.711 U-law
TECHNICAL SPECIFICATIONS
ELECTRICAL
Network Port RJ-45 connector for 100Base-TX Power Input PoE (IEEE 802.3af), Class 3
Power Consumption <10.50 W Local Storage Up to 32 GB on Micro SDHC or SDXC card Alarm
Input 1 Output 1; PhotoMOS Triggers Unsupervised mode that detects switch
24 VAC nominal, 18 to 32 VAC range
relay (30 V, 1 A)
closures (N.O. and N.C.)
ENVIRONMENTAL
Operating Temperature –45° to 55°C (–50° to 131°F)*
74°C (165.2°F) absolute maximum ambient
temperature per NEMA TS-2. Storage Temperature –40° to 60°C (–40° to 140°F) Operating Humidity 15% to 85%, RH condensing Storage Humidity 20% to 80% RH noncondensing *Thermostatically controlled heating provides ramped heating control
between the initial heater on at 15°C (59°F) and full heating mode at –45°C (–50°F).
GENERAL
Construction Die-cast aluminum; polycarbonate bubble Ingress Protection IP66 per IEC 60529
NEMA Type 4X Vandal Resistance IK10 (20J impact) per IEC 62262 Finish Light gray, RAL 7047; satin texture Pan/Tilt Adjustment Manual
Pan 355° Tilt 75°
Rotate 360° Weight 0.86 kg (1.90 lb) Shipping Weight 1.07 kg (2.36 lb)
NETWORK
Supported Protocols TCP/IP, UDP/IP (unicast, multicast IGMP),
Users
Unicast 1 administrator, up to 4 viewers Multicast Unlimited users H.264
Security Access Multiple user access levels with password
ICMP, IPv4, IPv6, SNMP v2c/v3, HTTP, HTTPS, SSL, SSH, SMTP, FTP, RTSP, UPnP, DNS, NTP, RTP, RTCP, LDAP (client), QoS
protection
INTEGRATION
Video Management Digital Sentry 7.3 (or later);
Mobile Application Integrated to Pelco Mobile App Analytics Simple motion detection and camera
Local Storage Capture 1-, 5- or 10-second video clips on
Camera Discovery and Firmware Cameras discovered and firmware upgrade
Web Browser Support Microsoft
Endura 2.0 (or later); Third-party VMS through Pelco API 1.0 and ONVIF Profile S and Profile G
sabotage detection
camera sabotage, motion detection, or alarm input; record video continuously in the case of network outage with option to overwrite; access video through FTP protocol and ONVIF Profile G
through Pelco Device Utility 2 version 2.2 or later; cameras discovered and firmware upgrade through Endura Utilities
®
Internet Explorer® 9.0, Apple®
®
Safari
7.0.6, Mozilla® Firefox®31.0,
®
Google
Chrome™ 37.0.2062.124 m and later
TECHNICAL SPECIFICATIONS
Pelco, the Pelco logo, and other trad emarks associated with Pelco products referred
to in this publication are trademarks of Pelco, Inc. or its affiliates. ONVIF and the
ONVIF logo are trademarks of ONVIF Inc. All othe r product names and
services are the property of their respective comp anies.
Product specifications and availability are subject to change without no tice.
©Copyright 2015, Pelco, Inc. All rights reserved.
SYSTEM MODEL NUMBERS*
Back Box Resolution Lens Model Number
5 MPx 3 to 9 mm IMP519-1ERI
3 MPx 3 to 9 mm IMP319-1ERI
In-Ceiling
Surface
Pendant
*System options contain a back box/mount, camera, and clear dome.
2 MPx 3 to 9 mm IMP219-1ERI
1 MPx 2.8 to 10 mm IMP1110-1ERI
SD 2.8 to 10 mm IMPS110-1ERI
5 MPx 3 to 9 mm IMP519-1ERS
3 MPx 3 to 9 mm IMP319-1ERS
2 MPx 3 to 9 mm IMP219-1ERS
1 MPx 2.8 to 10 mm IMP1110-1ERS
SD 2.8 to 10 mm IMPS110-1ERS
5 MPx 3 to 9 mm IMP519-1ERP
3 MPx 3 to 9 mm IMP319-1ERP
2 MPx 3 to 9 mm IMP219-1ERP
1 MPx 2.8 to 10 mm IMP1110-1ERP
SD 2.8 to 10 mm IMPS110-1ERP
COMPONENT MODEL NUMBERS
Back Box Lower Dome Camera Base
IMPBB-ES Environmental surface mount IMPLD-0E Environmental smoked dome IMP519-ERBASE 5 MP environmental IR camera
IMPBB-EP Environmental pendant mount IMPLD-1E Environmental clear dome IMP319-ERBASE 3 MP environmental IR camera
IMPBB-EI Environmental in-ceiling mount IMP219-ERBASE 2 MP environmental IR camera
IMP1110-ERBASE 1 MP environmental IR camera
IMPS110-ERBASE SD environmental IR camera
CERTIFICATIONS
• CE - EN 55022 (Class A), EN 50130-4, EN 60950-1
• FCC (Class A) - 47 CFR Part 15
• UL and cUL Listed - UL 60950-1, CAN/CSA-C22.2 No. 60950-1-07
• ICES-003
•KCC
• NEMA Type 4X and IP66 rated enclosure when installed properly
• ONVIF Profile S and Profile G conformant
• NEMA TS-2 (Temp.) para 2.2.7.3 - 2.2.7.7
RECOMMENDED MOUNTS
WMVE-SR Wall mount, light gray; for use with the
environmental pendant mount option
OPTIONAL ACCESSORIES
IPCT01 Pelco IP camera tester POE1AT-US Single-port PoE midspan with US power cord POE1AT-EU Single-port PoE midspan with European
power cord
Contact Pelco Product Support for more information about the use of the Pelco IP camera tester with cameras.
Pelco by Schneider Electric
3500 Pelco Way, Clovis, California 93612-5699 United States
USA & Canada Tel (800) 289-9100 Fax (800) 289-9150 International Tel +1 (559) 292-1981 Fax +1 (559) 348-1120 www.pelco.com www.pelco.com/community
Loading...