Pelco IME338-1ERS Specsheet

PRODUCT SPECIFICATION

camera solutions

Sarix® IME Indoor and Environmental IR Domes

UP TO 3 MP, WDR AND LOW-LIGHT PERFORMANCE, H.264, H.265, IK10+

Product Features

• SureVision Technology (Advanced Low-Light & WDR Performance

Simultaneously, Anti-Bloom Technology, 3D Noise Filtering, and
Enhanced Tone Mapping)

• Up to 3 Megapixel (MP) Resolution

• Up to 120 Frames per Second (fps) at 1080p on select models

• Up to 130 dB Wide Dynamic Range

• Adaptive IR Illumination (850 nm) up to 40 Meters

• Robust Electronic Image Stabilization

• Built-in Pelco Enhanced Analytics Suite & Capable of Advanced Deep

Learning Analytics Available Separately

• H.265, H.264, and MJPEG Encoding with Pelco Smart Compression

• Power Redundancy From PoE/PoE+ to 12 VDC / 24 VAC

• IP66, IP67, IP68, IP69K, Type 4X (Environmental Models Only)

• IK10+ (50 Joules) Rated Vandal Resistant

• Support for Local Storage with Micro SD Slot for SDHC/SDXC Card

• Compatible with Pelco and Third-Party Video Systems

• ONVIF Profile S, Profile G, and Profile T Conformant

• Full 3-Year Warranty and Support

Sarix Enhanced Range with SureVision

Sarix® Enhanced (E) range cameras feature SureVision technology, delivering
resolutions of 2 MP and 3 MP options, consistent color science, fast
processing power, and simultaneous advanced low-light performance with
wide dynamic range (WDR) and anti-bloom technologies. New advancements
include 3D noise filtering, smooth response to illumination changes, and
improved tone mapping to retain color accuracy and overall image contrast.

With Electronic Image Stabilization enabled by built-in Gyro technology, Sarix
Enhanced cameras always provide sharp, stable images even in the presence
of vibration and wind movement.

Power redundancy between PoE/PoE+ and 12 VDC/24 VAC ensures 24-hour,
365-day continuous operation even under unstable power supply situations.

The IME Series Dome Camera

The IME Series include indoor and environmental domes. All models feature
a sturdy design that is IK10+ (50 Joules) rated, vandal resistant. The
environmental models feature worry-free use in harsh environments with
IP66, IP67, IP68, IP69K and Type 4X ratings, and a wide range of operating
temperatures.

Sarix Enhanced range cameras contain an integrated P-Iris, autofocus, and
motorized zoom lens for quick installation and easy maintenance. Included
are unique, advanced autofocus options: temperature change, day/night
transition, and auto/manual focus. These benefits ensure clear, focused
images regardless of the scene or environment. All autofocus options are
available through the web UI.

Integrated and Adaptive IR Illumination 850 nm up to 40 m is available on all
models to ensure visibility in totally dark environments.

A System Watchdog feature automatically restarts the camera if a
malfunction is detected.

Video

The IME Series supports three independently-configurable video streams.
The three streams can be compressed with efficient H.265, H.264 High or
Main profiles, or MJPEG formats. The streams can be configured to a variety
of frame rates, variable bit rates, and group of pictures (GOP) structures to
optimize image quality with bandwidth and storage efficiency. In addition,
streams can be encoded as constrained variable bit rate (CVBR) or constant
bit rate (CBR). Pelco Smart Compression is available on both H.264 and H.265,
optimizing between bandwidth and image quality and can reduce storage by
up to 70% depending on the scene.

Open and Integrated

Sarix Enhanced range cameras seamlessly connect to Pelco video
management systems such as VideoXpert
(or later), and Digital Sentry
cameras integrate with major third-party video management systems through
the Pelco API, and other third-party software and systems through the ONVIF
Profile S, G, and T standards.

®

version 7.3 (or later). Sarix Enhanced range

™

, VXToobox, Endura® version 2.0

C4099S / New 2-19-20

TECHNICAL SPECIFICATIONS

POWER REDUNDANCY

Sarix Enhanced range cameras are designed with Power over

Ethernet (PoE or PoE+), 24 VAC and 12 VDC to reduce costs and
simplify planning, wiring, and installation. PoE functionality works
with PoE-enabled network switches or power injectors, eliminating
the need for separate power supplies and cabling, and increasing
camera fail safety through an uninterruptable power supply (UPS).

The cameras also support power supply failover between PoE/PoE+
and 12 VDC/24 VAC. If the camera is running with both PoE power
and 12 VDC/24 VAC power supplied, and then PoE power is lost, the
camera will switch to 12 VDC/24 VAC without any interruption or
video loss. Once PoE power is restored, the camera will reboot and
then run using PoE power.

PELCO ENHANCED ANALYTICS SUITE

Sarix Enhanced range cameras includes two Basic and seven

Enhanced user-configurable behaviors to enhance the flexibility and
performance of the camera. The camera is capable of running up to
two Enhanced behaviors in addition to the two Basic behaviors at the
same time.

For each behavior, you can set up different scenarios for the behavior,
which will automatically detect and trigger alarms when specific
activity is detected.

Analytics are configured and enabled using a standard Web browser,
and behavior alarms are compatible with VideoXpert or a third-party
system that supports Pelco’s API.

Available Basic analytic behaviors include:

• Camera Sabotage: Detects contrast changes in the field of view. An

alarm is triggered if the lens is obstructed by spray paint, a cloth, or a
lens cap. Any unauthorized repositioning of the camera also triggers an
alarm.

• Region-Based Simple Motion Detection: Based on sensitivity, the

camera determines if sufficient motion is detected within a configurable
region.

Available Enhanced analytic behaviors include:

• Abandoned Object: Detects objects placed within a defined zone and

triggers an alarm if the object remains in the zone unattended. An airport
terminal is a typical installation for this behavior. This behavior can also
detect objects left behind at an ATM, signaling possible card skimming.

• Adaptive Motion: Detects and tracks objects that enter a scene and

then triggers an alarm when the objects enter a user-defined zone. This
behavior is primarily used in outdoor environments with light traffic to
reduce the number of false alarms caused by environmental changes.

• Directional Motion: Generates an alarm in a high traffic area when a

person or object moves in a specified direction. Typical installations for
this behavior include an airport gate or tunnel where cameras can detect
objects moving in the opposite direction of the normal flow of traffic or an
individual entering through an exit door.

• Loitering Detection: Identifies when people or vehicles remain in a

defined zone too long. This behavior is effective in real-time notification
of suspicious behavior around ATMs, stairwells, and school grounds.

• Object Counting: Counts the number of objects that cross a defined

line. This behavior can be used to count the number of people at a store
entrance/exit or inside a store where the traffic is light. This behavior is
based on tracking and does not count people in a crowded setting.

• Object Removal: Triggers an alarm if an object is removed from a

user-defined zone. This behavior is ideal for customers who want to
detect the removal of high value objects, such as a painting from a wall or
a statue from a pedestal.

• Stopped Vehicle: Detects vehicles stopped near a sensitive area longer

than the user-defined time allows. This behavior is ideal for airport
curbside drop-offs, parking enforcement, suspicious parking, traffic lane
breakdowns, and vehicles waiting at gates.

PELCO’S SMART COMPRESSION TECHNOLOGY

Pelco’s Smart Compression Technology lowers bandwidth and storage
requirements by up to 70%. Our technology allows the user to make
intelligent decisions regarding storage savings and image quality.

Pelco’s Smart Compression Technology dynamically analyzes motion

occurring within live video in real-time, to intelligently compress the
information you don’t need, while retaining details with clear quality in the
areas that are important in the scene. By enabling Dynamic GOP, an added
feature of Smart Compression, the number of I-frames are automatically
reduced in scenes with low motion. Based on the complexity of scenes and
motion occurring, such as a store room that has limited entry and exit, up to
70% bandwidth savings can be achieved.

TECHNICAL SPECIFICATIONS

COMPONENT FEATURES

VALUES IN PARENTHESES ARE INCHES; ALL OTHERS ARE CENTIMETERS.

Indoor/Vandal-Resistant, Surface Mount

• Attaches to Electrical Box Adapter

• Meets IP54

• Meets IK10+ (50J)

• Aluminum Construction with Polycarbonate
Bubble

• RAL 9003

• Built-in Microphone

• IEEE802.3af PoE Class 3, 24 VAC or 12 VDC

Environmental/Vandal-Resistant, Surface
Mount

• Attaches to Electrical Box with Adapter

• Meets IP66, IP67, IP68, IP69K

• Meets Type 4X

• Meets IK10+ (50J)

• Aluminum Construction with Polycarbonate
Bubble

• RAL 9003

•Heater

• IEEE802.3at PoE+ Class 4, 24 VAC or 12 VDC

• NEMA TS2 (Temp.) para 2.2.7.3 - 2.2.7.7

CAMERA

Imaging Device 1/2.8-inch
Imager Type CMOS
Imager Readout Progressive scan
Highest Resolution

3 MP 2048 x 1536

2 MP 1920 x 1080
Signal-to-Noise Ratio >60 dB
Electronic Shutter Range
Wide Dynamic Range Up to 130 dB
White Balance Range: 2,500° to 10,000°K; Selectable Auto/

Day/Night Capabilities Mechanical IR cut filter (ON/OFF/AUTO), with

Adaptive IR Illumination 850nm wavelength, maximum distance of

3D Noise Reduction Yes (ON / OFF selectable)

Minimum Illumination

1/10000 sec (or faster) to 1sec

Manual

different set points on lux

40 meters (131 feet)

Resolution Lens Sensitivity

2 MP 2.8-8 mm f/1.3 0.0125 lux 0.0012 lux 0.0025 lux 0.0003 lux 0.0 lux

3 MP

2.8-8 mm f/1.3 0.05 lux 0.005 lux 0.010 lux 0.001 lux 0.0 lux

8-20 mm f/1.5 0.080 lux 0.008 lux 0.015 lux 0.0018 lux 0.0 lux

Color Mono

33 ms 500 ms 33 ms 500 ms

Mono (IR on)

TECHNICAL SPECIFICATIONS

LENS

Lens Type Built-in; varifocal
Focal Length f/1.3, 2.8 ~ 8 mm, f/1.5, 8 ~ 20 mm
Focus Autofocus, motorized
Zoom Remote motorized
Auto Iris Type P-Iris
Field of View in Degrees*
*Note: Field of view may vary with changes in resolution settings.

Lens

2.8 - 8 mm

8 - 20 mm

Angle of

View

Diagonal 136.4° ~ 47.4° 137.9° ~ 47.8°

Horizontal 115.7° ~ 41.3° 106° ~ 38.2°

Vertical 62.4° ~23.2° 77° ~ 28.7°

Diagonal

Horizontal 36.5° ~ 15°

Vertical 27° ~ 11.3°

2 MP 3 MP

46.5° ~ 18.8°

N/A

AUDIO

Streaming Bidirectional: full or half duplex
Built-In Microphone 60 SPL @ 25 feet >40dB SNR (indoor models

Input Line level, 3K ohm differential with/1Vp-p

Output Line level, 600 ohm differential with/1Vp-p
Encoding G.711-Alaw/G711-Ulaw

only)

maximum signal

GENERAL

Pan/Tilt Adjustment Manual

Pan 0° ~ 370°
Tilt -10° ~ -90°
Rotation ±100°

Construction Aluminum with polycarbonate bubble
Finish White, RAL 9003
Weight

Unit 3.1 pounds
Shipping 4 pounds

EPA 36.9 in^2

ENVIRONMENTAL

Operating Temperature

Indoor/Vandal-Resistant –10° to 55°C (14° to 131°F)

Environmental –50° to 60°C (–58° to 140°F)
4-Hour Duration Maximum
Operating Temperature 65°C (149°F) (environmental models)
Start-up Temperature

Indoor –10°C (14°F)

Environmental –40°C (–40°F)
Storage Temperature

Indoor and Environmental –40° to 60°C (–40° to 140°F)
Operating Humidity

Indoor/Vandal-Resistant 10 to 90%, RH condensing

Environmental 10 to 100%, RH condensing
Storage Humidity 20 to 80%, RH noncondensing
Impact Resistance IK10+ (50 J)
Ingress Protection IP54 (indoor models),

IP66, IP67, IP68, IP69K, Type 4X

(environmental models)
Shock and Vibration
Resistance Tested in accordance to EN50155 (EN61373,

Category 1, Class B); IEC/EN 60068:2-6 and 2-

27

†

†

ELECTRICAL

Network Port RJ-45 connector for 100Base-TX*/

1000Base-T
*Some combinations of high resolution, frame rate, and high numbers of

unicast streams, may lead to less desirable results at 100Base-TX.
Input Power PoE (

Power Consumption

Indoor Dome 7.6 W typical, 12.95 W maximum
Environmental Dome

12 VDC 8.1 W typical, 20.5 W maximum
24 VAC 7.4 W typical, 18.1 W maximum
PoE+ 7.6 W typical, 16.8 W maximum

Local Storage UHS-1 compliant micro SD, SDHC, SDXC

Alarm Detects open or closed alarm state

Input Quantity 1, Normally Open, Normally Closed,

Output Quantity 1, ±32 VDC maximum, 150 mA

IEEE 802.3af, Class 3), 24 VAC (18 ~ 32

VAC)

, 12 VDC ±10% (Indoor models)

PoE+ (

IEEE 802.3at, Class 4), 24 VAC (18 ~

32 VAC)

, 12 VDC ±10% (Environmental

models)

compatible;

Up to 2 TB addressable (256 GB testable)

Supervised,

3.5 VDC maximum, 35 mA maximum

maximum

TECHNICAL SPECIFICATIONS

NETWORK

Supported Protocols TCP/IP, UDP/IP (Unicast, Multicast IGMP),

Users

Unicast Two guaranteed (up to 20 depending on the

Multicast Unlimited

Security Access Password protected, HTTP, IEEE 802.1X,

Software Interface Web browser view and setup

UPnP, DNS, DHCP, RTP, RTSP, NTP, IPv4, IPv6,
SNMP v2c/v3, QoS, HTTP, HTTPS, SSL, SMTP,
FTP, 802.1x (EAP), and NTCIP 1205, IGMP,
TLS/TTLS

resolution settings)

digest authentication, IP filtering

MINIMUM SYSTEM REQUIREMENTS

Processor Intel® Core™ i3 processor, 2.4 GHz
Operating System Microsoft

Memory 4 GB RAM
Network Interface 1 gigabit (or greater)
Monitor Minimum of 1024 x 768 resolution,

Web Browser Internet Explorer

®

Windows® 7 (32- and 64-bit), or

®

DirectX

11, Windows XP Service Pack 3 with

DirectX 9.0c; or Mac

®

OS X 10.4 (or later)

16- or 32-bit pixel color resolution

®

10 (or later), Google

™

Chrome

(51 or later), Microsoft Edge, or

®

Mozilla

Firefox® 3.5 (or later)

INTEGRATION

Pelco System Integration VideoXpert;

Endura 2.0 (or later);
Digital Sentry 7.3 (or later)

Open API Pelco API or ONVIF Profile S, Profile G, Profile

T
Mobile Application Pelco Mobile Application
Camera Discovery VX Toolbox
Firmware Upgrade Web UI or VxToolbox
Multilingual User Interface English, French, Italian, German, Spanish,

Korean, Portuguese, Russian, Simplified

Chinese, Turkish

VIDEO

Video Streams Up to three simultaneous streams, the second

stream and third stream are variable based on

the setup of the primary stream
Available Resolutions 3 MP 2048 x 1536 to 640 x 360;

2 MP 1920 x 1080 to 512 x 384
Maximum Frame Rate Up to 120 frames per second, 30 fps with

WDR
Video Encoding H.265, H.264 Main/High, MJPEG
Bit Rate Control Constrained variable bit rate (CVBR) and

constant bit rate (CBR)
Orientation Modes Electronic image rotation 90, 180, and 270

degrees (Corridor Mode)
Video Snapshot JPEG capture at the same resolution as the

highest stream configured
Window Blanking 16 configurable Windows
Electronic Image
Stabilization Yes (ON / OFF selectable)
Video Overlay Camera name, time, date, and customizable

text with multiple supported languages.

Embedding of custom images and logos

supported.
Flicker Correction Selectable Auto On/Off, 50 Hz or 60 Hz modes

TECHNICAL SPECIFICATIONS

18.15
(7.15)

17.00
(6.69)

0.56

(0.22)

13x Ø 0.488

(0.19)

Ø 2.70

(1.06)

2x Ø 0.42

(0.17)

2x M4x1.7

19.00
(7.48)

10.88
(4.28)

21.35
(8.41)

5.64

(2.22)

0.86

(0.34)

8.64

(3.40)

17.45

(6.87)

14.20
(5.59)

CERTIFICATIONS/RATINGS

• CE (Class A)

• FCC (Class A)

• ICES-003 (Class A)

• UL/cUL Listed

• UL/IEC/EN 60950-1, 60950-22

•KC

•RCM

•EAC

•BIS

• Environmental models:
– Type 4X
– EN 50155 (EN 61373 Category 1, Class B)
– IEC/EN 60068-2-6 Product Vibration
– IEC/EN 60068-2-27 Product Shock
– IEC/EN 62262 Impact (IK 10+)
– IEC/EN 60529 (IP66, IP67, IP68, IP69K)

• Indoor models:
– IEC/EN 60529 (IP54)

• Meets NEMA TS2 para 2.2.7 - 2.2.9 (Environmental models)

• FDOT (Environmental models)

• ONVIF Profile S, Profile G, and Profile T Conformant

RECOMMENDED MOUNTS

PA101 with WMVE-SW &
IME3PM-E Pole Mount for use with WMVE-SW &

IME3PM-E
IME3ICM-E In-ceiling mount, RAL 9003
IME3PM-E Pendant mount, RAL 9003
IMM-CM with WMVE-SW &
IME3PM-E Corner mount for use with WMVE-SW &

IME3PM-E
IME3EBAP-E Electrical box adapter
WMVE-SW Wall mount, 1.5 in. NPT, RAL 9003
IWM-SW Wall mount with cable feedthrough, RAL9003
IWM24-SW Wall mount with cable feedthrough, includes

integral 24 VAC, 100 VA transformer,

RAL9003
PP350/PP351 Parapet wall/roof mount, RAL9002
PP450/PP451 Parapet wall/roof mount, RAL9002

OPTIONAL ACCESSORIES

IME3LD-0E Smoked lower dome (environmental)
IME3LD-1E Clear lower dome (environmental)
IME3LD-0 Smoked lower dome (indoor)
IME3LD-1 Clear lower dome (indoor)

POWER SUPPLIES

MCS Series Indoor, 24 VAC power supply
WCS Series Outdoor, 24 VAC power supply
POE130-XT Single-port PoE Gigabit extender powered by

POE190-BT injector
POE130-AT (US or EU) Single-port PoE+ midspan with power cord
POE430-AT (US or EU) 4-port, 30W per port PoE midspan with power

cord
POE1236-AT (US or EU) 12-port, 36W PoE midspan
POE2436-AT (US or EU) 24-port, 36W PoE midspan

IME3ICM-E IN-CEILING MOUNT

VALUES IN PARENTHESES ARE INCHES; ALL OTHERS ARE CENTIMETERS.

IME3EBAP-E ELECTRICAL BOX ADAPTER

Color: RAL 9003

TECHNICAL SPECIFICATIONS

Pelco, the Pelco logo, and other trad emarks associated with Pelco products referred

to in this publication are trademarks of Pelco, Inc. or its affiliates. ONVIF and the

ONVIF logo are trademarks of ONVIF Inc. All othe r product names and

services are the property of their respective comp anies.

Product specifications and availability are subject to change without no tice.

©Copyright 2020, Pelco, Inc. All rights reserved.

17.20
(6.77)

14.50
(5.71)

8.78

(3.46)

3/4" NPT

2.71

(1.06)

7.31

(2.88)

MODELS*

Back Box Resolution Model Number Lens Description

2 MP IME238-1ERS 2.8

2 MP IME238-1IRS 2.8

Surface

3 MP IME332-1ERS 8

3 MP IME332-1IRS 8

3 MP IME338-1ERS 2.8

3 MP IME338-1IRS 2.8

*System options contain a back box/mount, camera, and clear dome.

IME3PM-E PENDANT MOUNT

~ 8 mm Sarix Enhanced IR Environmental Dome

~ 8 mm Sarix Enhanced Indoor IR Dome

~ 20 mm Sarix Enhanced Environmental IR Dome

~ 20 mm Sarix Enhanced Indoor IR Dome

~ 8 mm Sarix Enhanced Environmental IR Dome

~ 8 mm Sarix Enhanced Indoor IR Dome

Color: RAL 9003

Pelco, Inc.

625 W. Alluvial, Fresno, California 93711 United States

USA & Canada Tel [phone] Fax [phone]
International Tel [phone] Fax [phone]
www.pelco.com