21Alarm/Relay/Audio Port Pins ....................................................... 27
22Template for Surface Mount: Indoor ................................................. 29
23Template for Surface Mount: Environmental/Vandal-Resistant ............................ 30
C2269M-B (9/14)3
Important Notices
LEGAL NOTICE
SOME PELCO EQUIPMENT CONTAINS, AND THE SOFTWARE ENABLES, AUDIO/VISUAL AND RECORDING
CAPABILITIES, THE IMPROPER USE OF WHICH MAY SUBJECT YOU TO CIVIL AND CRIMINAL PENALTIES.
APPLICABLE LAWS REGARDING THE USE OF SUCH CAPABILITIES VARY BETWEEN JURISDICTIONS AND
MAY REQUIRE, AMONG OTHER THINGS, EXPRESS WRITTEN CONSENT FROM RECORDED SUBJECTS.
YOU ARE SOLELY RESPONSIBLE FOR INSURING STRICT COMPLIANCE WITH SUCH LAWS AND FOR
STRICT ADHERENCE TO ANY/ALL RIGHTS OF PRIVACY AND PERSONALTY. USE OF THIS EQUIPMENT
AND/OR SOFTWARE FOR ILLEGAL SURVEILLANCE OR MONITORING SHALL BE DEEMED UNAUTHORIZED
USE IN VIOLATION OF THE END USER SOFTWARE AGREEMENT AND RESULT IN THE IMMEDIATE
TERMINATION OF YOUR LICENSE RIGHTS THEREUNDER.
REGULATORY NOTICES
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
RADIO AND TELEVISION INTERFERENCE
This equipment has been tested and found to comply with the limits of a Class A digital device, pursuant
to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
Changes and Modifications not expressly approved by the manufacturer or registrant of this equipment
can void your authority to operate this equipment under Federal Communications Commission’s rules.
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
KOREAN CLASS A EMC
4C2269M-B (9/14)
VIDEO QUALITY CAUTION
FRAME RATE NOTICE REGARDING USER-SELECTED OPTIONS
Pelco systems are capable of providing high quality video for both live viewing and playback. However, the
systems can be used in lower quality modes, which can degrade picture quality, to allow for a slower rate
of data transfer and to reduce the amount of video data stored. The picture quality can be degraded by
either lowering the resolution, reducing the picture rate, or both. A picture degraded by having a reduced
resolution may result in an image that is less clear or even indiscernible. A picture degraded by reducing
the picture rate has fewer frames per second, which can result in images that appear to jump or move
more quickly than normal during playback. Lower frame rates may result in a key event not being recorded
by the system.
Judgment as to the suitability of the products for users’ purposes is solely the users’ responsibility. Users
shall determine the suitability of the products for their own intended application, picture rate and picture
quality. In the event users intend to use the video for evidentiary purposes in a judicial proceeding or
otherwise, users should consult with their attorney regarding any particular requirements for such use.
OPEN SOURCE SOFTWARE NOTICE
This product includes certain open source or other software originated from third parties that is subject to
the GNU General Public License (GPL), GNU Library/Lesser General Public License (LGPL) and different
and/or additional copyright licenses, disclaimers, and notices.
The exact terms of GPL, LGPL, and some other licenses are provided to you with this product. Please refer
to the exact terms of the GPL and LGPL at http://www.fsf.org (Free Software Foundation) or http://www.opensource.org (Open Source Initiative) regarding your rights under said license. You may obtain a
complete corresponding machine-readable copy of the source code of such software under the GPL or
LGPL by sending your request to digitalsupport@pelco.com; the subject line should read Source CodeRequest. You will then receive an email with a link for you to download the source code.
This offer is valid for a period of three (3) years from the date of the distribution of this product by Pelco.
WARRANTY STATEMENT
For information about Pelco’s product warranty and thereto related information, refer to www.pelco.com/
warranty.
C2269M-B (9/14)5
Introduction
The Sarix®IME Series IP cameras feature SureVision technology that seamlessly delivers advanced
low-light performance with wide dynamic range (WDR) and anti-bloom technologies that operate
simultaneously. They are part of Pelco’s Enhanced (E) range of cameras, providing industry-leading image
quality and performance.
The IME Series mini dome camera is easy to install, offers flexible mounting options, and uses a standard
Web browser for easy remote setup and administration.
The IME Series easily connects to Pelco IP and hybrid systems such as Endura®version 2.0 (or later),
Digital Sentry®version 7.3 (or later), and DX4700/DX4800 hybrid video recorders. The camera is also
conformant with ONVIF Profile S for connection with third-party software. Pelco offers an application
programming interface (API) and software developer’s kit (SDK) for interfacing with Pelco’s IP cameras.
This document describes the installation and initial setup procedures to begin operating the camera. For
more information about operating your camera, refer to the operation manual specific to the product.
NOTE: For additional information about product documentation in English and other languages, go to
www.pelco.com/sarix and navigate to the IME Series Web page.
WMVE-SRWall mount, light gray; for use with environmental and vandal-resistant pendant mount
WMVE-SWWall mount, white; for use with indoor pendant mount options
PA101Pole adapter for use with WMVE-SR wall mount
options
OPTIONAL ACCESSORIES
IPCT01Pelco IP camera tester*
ALM-1External alarm accessory
POE20U560GSingle port PoE injector
IMELLD1-0ILower dome assembly, smoked, in-ceiling, white
IMELLD1-0BILower dome assembly, smoked, in-ceiling, black
IMELD1-0SLower dome assembly, smoked, surface mount/pendant, white
IMELD1-0BSLower dome assembly, smoked, surface mount/pendant, black
IMELD1-0VLower dome (bubble only), smoked, environmental/vandal-resistant
IMELD1-1VLower dome (bubble only), clear, environmental/vandal-resistant
*Contact Pelco Product Support for more information about the use of the Pelco IP camera tester with
cameras.
8C2269M-B (9/14)
Getting Started
Before installing your device, thoroughly familiarize yourself with the information in the installation
section of this manual.
NOTES:
•Pelco recommends connecting the device to a network that uses a Dynamic Host Configuration
Protocol (DHCP) server to address devices.
•Do not use a network hub when configuring the network settings for the device.
•To ensure secure access, place the device behind a firewall when it is connected to a network.
IN-CEILING MODELS
SUPPLIED PARTS LIST
Qty Description
1 Camera
1 Back box
1 Lower dome
1 Bit
1 8-pin connector for Alarm/Relay/Audio port
2 MAC address labels (extra)
1 IME Series Mini Dome IP Camera Installation manual
1 Important Safety Instructions
1 Resource disc
USER-SUPPLIED PARTS LIST
In addition to the standard tools and cables required for a video security installation, you will need to
provide the following items:
1 Camera
1 Mounting plate
1 Surface mounting ring (for environmental and vandal-resistant models)
1 Lower dome
1 Bit
1 8-pin connector for Alarm/Relay/Audio port
2 MAC address labels (extra)
1 IME Series Mini Dome IP Camera Installation manual
1 Important Safety Instructions
1 Resource disc
USER-SUPPLIED PARTS LIST
In addition to the standard tools and cables required for a video security installation, you will need to
provide the following items:
Qty Description
1 Mounting substrate and fasteners for indoor surface mount (one of the
following):
• Standard single-gang electrical box and appropriate fasteners
• Any substrate using 2 standard screws, size M4 or #8 hardware
1 Mounting substrate and fasteners for environmental and vandal-resistant
surface mount (one of the following):
• Standard 4 in. square electrical box and appropriate fasteners
• Standard 2-gang electrical box and appropriate fasteners
• Any substrate using 3 standard screws, size M6 or 1/4 in. hardware
1 Pipe/conduit (environmental and vandal-resistant models, if applicable)
1 Conduit adapters (environmental and vandal-resistant models, if
1 Camera
1 Pendant mount
1 Lower dome
1 Bit
1 8-pin connector for Alarm/Relay/Audio port
2 MAC address labels (extra)
1 IME Series Mini Dome IP Camera Installation manual
1 Important Safety Instructions
1 Resource disc
USER-SUPPLIED PARTS LIST
In addition to the standard tools and cables required for a video security installation, you will need to
provide the following items:
Qty Description
1 Pipe/conduit (if applicable)
1 Pipe nipple adapters (if using pipe/conduit)
1 Cat5 (or higher) cable
1 WMVE-SR (ifusing the wall mount for environmental and vandal-resistant
pendant models)
1 WMVE-SW (if using the wall mount for indoor pendant models)
1 RJ-45 connector
1 24 AWG,8-wire multiconductor cable (if using alarm, relays, or line-in and
line-out audio)
1
SD card, 32 GB SanDisk Extreme
®
PLUS microSDHC™UHS-I
C2269M-B (9/14)11
Loading...
+ 25 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.