Pelco IBE238-1ER, IBE238-1ERBR, IBE238-1ERUS, IBE338-1ERBR, IBE338-1ERUS Specsheet

PRODUCT SPECIFICATION

camera solutions

Sarix® IBE Environmental IR Bullet Cameras

UP TO 4 K, WDR AND LOW-LIGHT PERFORMANCE, H.264, H.265, IK10

Product Features

• SureVision Technology (Advanced Low-Light & WDR Performance

Simultaneously, Anti-Bloom Technology, 3D Noise Filtering, and
Enhanced Tone Mapping)

• H.265, H.264, and MJPEG Video Encoding with Pelco Smart

Compression

• Up to 4 K Resolution

• Robust Electronic Image Stabilization

120 Frames per Second (fps) at 1080p on Select Models

• Up to

• Up to 130 dB Wide Dynamic Range

• Power Redundancy Between PoE+ to 12 VDC / 24 VAC

• IP66, IP67, IP68, IP69K, Type 4X

• IK10 (20 Joules) Rated Vandal Resistant

• Built-in Pelco Enhanced Analytics Suite & Capable of Advanced Deep

Learning Analytics Available Separately

• Adaptive IR Illumination 850 nm up to 50 Meters

• Support for Local Storage with Micro

• Compatible with Pelco and Third-Party Video Systems

• ONVIF Profile S, Profile G, and Profile T Conformant

• Full 3-Year Warranty and Support

SD Slot for SDHC/SDXC Card

Sarix Enhanced Range with SureVision

Sarix® Enhanced ( E) range cameras feature SureVision technology,

delivering resolutions of up to 4 K options, consistent color science, fast
processing power, and simultaneous advanced low-light perfor
wide dynamic range (WDR) and anti-bloom technologies.

New ad vanc emen ts inc lu de 3D n oi se f il tering , smooth re sponse t o
illumination changes, and improved ton mapping to retain color accuracy and
overall image contrast.

With Electronic Image Stabilization enabled by built-in Gyro techno logy,
Sarix Enhanced cameras always provide sharp, stable images even in the
presence of vibration and wind m
and 12 VDC/24 VAC ensures 24-hour, 365-day continuous operation even
under unstable power supply situations.

ovement. Power redundancy between PoE+

mance with

The IBE Series Bullet Camera

The IBE Series includes environmental bullets. All models feature a sturdy
design that is IK10 (20 Joules) rated, vandal resistant. The environmental
models feature worry-free use in harsh environments with IP66, IP67, IP68,

, and Type 4X ratings, and a wide range of operating temperatures.

IP69K

Sarix Enhanced range cameras contain an integrated P-Iris, autofocus, and

motorized zoom lens for quick installation and easy maintenance. Included
are unique, advanced autofocus options: temperature change, day/night
transition, and auto/manual focus. These benefits ensure clear, fo cused
images regardless of the scene or environment. A
available through the web UI.

ll autofocus options are

Integrated and Adaptive IR Illumination 850 nm up to 50 m is available on
all models to ensur e visibi lit y in totally dark environme nts. A System
Watchdog feature automatically restarts the camera if a malfunction is
detected.

Video

The IBE Series supports three independently-configurable video streams.
The three streams can be compressed with efficie
Main profiles, or MJPEG formats. The streams can be configured to a variety
of frame rates, variable bit rates, and group of pictures (GOP) structures to
optimize image quality with bandwidth and storage efficiency. In addition,
streams can be encoded as constrained variable bit rate (CVBR) or constant
bit rate (CBR). Pelco Smart Compression is available on both H.264 and H.265,
optimizing between bandwidth and image quality and can reduce storage by
up to 70% depending on the scene.

nt H.265, H.264 High or

Open and Integrated

Sarix Enhanced r ange came ras seamlessly connect t o Pelco video

management systems such as VideoXpert
(or later), and Digital Sentry® version 7.3 (or later). Sarix Enhanced range
cameras integrate with major third-party video management systems th
the Pelco API, and other third-party software and systems through the ONVIF
Profile S, G, and T standards.

™

, VXToolbox, Endura® version 2.0

rough

C4026 / New 6-02-20

TECHNICAL SPECIFICATIONS

POWER REDUNDANCY

Sarix Enhanced range cameras are designed with Power over

Ethernet (PoE+), 24 VAC and 12 VDC to reduce costs and simplify
planning, wiring, and installation. PoE+ functionality works with
PoE+-enabled network switches or power injectors, eliminating the
need for separate power supplies and cabling, and increasing
camera fail safety through an uninterruptable powe

r supply (UPS).

The cameras also support power supply failover between PoE+ and
12 VDC/24 VAC. If the camera is running with both PoE+ power and
12 VDC/24 VAC power supplied, and then PoE+ power is lost, the
camera will switch to 12 VDC/24 VAC without any interruption or
video loss. Once PoE+ power is restored, the camera will reboot and
then run using PoE+ power.

PELCO ENHANCED ANALYTICS SUITE

Sarix Enhanced range cameras includes two Basic and seven

Enhanced user-configurable behaviors to enhance the flexibility and
performance of the camera. The camera is capable of running up to
two Enhanced behaviors in addition to the two Basic behaviors at the
same time.

For each behavior, you can set up different scenarios for the behavior,
which will automatically detect and trigger alarms when specific
activit

y is detected.

Analytics are configured and enabled using a standard Web browser,
and behavior alarms are compatible with VideoXpert or a third-party

system that supports Pelco’s API.

Available Basic analytic behaviors include:

• Camera Sabotage: Detects contrast changes in the field of view. An

alarm is triggered if the lens is obstructed by spray paint, a cloth, or a
lens cap. Any unauthorized repositioning of the camera also trigg
alarm.

• Region-Based Simple Motion Detection: Based on sensitivity, the

camera determines if sufficient motion is detected within a configurable
region.

ers an

Available Enhanced analytic behaviors include:

• Abandoned Object: Detects objects placed within a defined zone and

triggers an alarm if the object remains in the zone unattended. An airport
terminal is a typical installation for this behavior.
detect objects left behind at an ATM, signaling possible card skimming.

• Adaptive Motion: Detects and tracks objects that enter a scene and

then triggers an alarm when the objects enter a user-defined zone. This
behavior is primarily used in outdoor environments with light traffic to
reduce the number of false alarms caused by environmental changes.

• Directional Motion: Gener

person or object moves in a specified direction. Typical installations for
this behavior include an airport gate or tunnel where cameras can detect
objects moving in the opposite direction of the normal flow of traffic or an
individual entering through an exit door.

• Loitering Detection: Identifies when people or vehicles remain in a

defined zone too long
of suspicious behavior around ATMs, stairwells, and school grounds.

• Object Counting: Counts the number of objects that cross a defined

line. This behavior can be used to count the number of people at a store
entrance/exit or inside a store where the traffic is light. This behavior is
based on tracking and does not count people in a crowded set

• Object Removal: Triggers an alarm if an object is removed from a

user-defined zone. This behavior is ideal for customers who want to
detect the removal of high value objects, such as a painting from a wall or
a statue from a pedestal.

• Stopped Vehicle: Detects vehicles stopped near a sensitive area longer

than the user-defined time allows. This behavior is ideal for airport
curbside drop-offs
breakdowns, and vehicles waiting at gates.

ates an alarm in a high traffic area when a

. This behavior is effective in real-time notification

, parking enforcement, suspicious parking, traffic lane

This behavior can also

ting.

PELCO’S SMART COMPRESSION TECHNOLOGY

Pelco’s Smart Compression Technology lowers bandwidth and storage

requirements by up to 70%. Our technology allows the user to make
intelligent decisions regarding storage savings and image quality.

Pelco’s Smart Compression Technology dynamically analyzes motion

occurring within live video in real-time, to intelligently compress the

information you don’t need, while retaining details with clear quality in the

areas that are important in the scene. By enabling Dynamic
feature of Smart Compression, the number of I-frames are automatically
reduced in scenes with low motion. Based on the complexity of scenes and
motion occurring, such as a store room that has limited entry and exit, up to
70% bandwidth savings can be achieved.

GOP, an added

TECHNICAL SPECIFICATIONS

29.64

(11.67)

20.63
(8.12)

30.85

(12.15)

Ø 9.90
(3.90)

11.00
(4.33)

Ø 11.56

(4.55)

COMPONENT FEATURES

VALUES IN PARENTHESES ARE INCHES; ALL OTHERS ARE CENTIMETERS.

Environmental/Vandal-Resistant

• Camera can mount directly to the
wall.

• Meets IP66, IP67, IP68, IP69K

• Meets IK10 (20J)

• Meets Type 4X

• Aluminum Construction

• RAL 9003

• IEEE802.3at PoE+ Class 4, 24 VAC

or 12 VDC

• NEMA TS-2 para 2.2.7 - 2.2.9

CAMERA

Imaging Device 1/2.8-inch or 1/1.8-inch
Imager Type CMOS
Imager Readout Progressive scan
Highest Resolution

4 K 3840 x 2160
5 MP 2592 x 1944
3 MP 2048 x 1536

2 MP 1920 x 1080
Signal-to-Noise Ratio >60 dB
Electronic Shutter Range
Wide Dynamic Range Up to 130 dB (2 MP and 3 MP models),

White Balance Range: 2,500° to 10,000°K; Selectable Auto/

Day/Night Capabilities Mechanical IR cut filter (ON/OFF/AUTO), with

Adaptive IR Illumination 850nm wavelength, maximum distance of up

Minimum Illumination

1/10,000 sec to 1sec

Up to 120 dB (5 MP and 4 K models).
Per IEC 62676

ual/ATW

Man

different set points on lux

to 50 meters (164 feet)

Resolution Lens Sensitivity

2 MP 2.8-8 mm f/1.3 0.0125 lux 0.0012 lux 0.0025 lux 0.0003 lux 0.0 lux

3 MP

2.8-8 mm f/1.3 0.05 lux 0.005 lux 0.010 lux 0.001 lux 0.0 lux

8-20 mm f/1.5 0.08 lux 0.008 lux 0.015 lux 0.0018 lux 0.0 lux

5 MP 4-9 mm f/1.5 0.10 lux 0.00625 lux 0.05 lux 0.003125 lux 0.0 lux

8 MP (4 K)

4-9 mm f/1.5 0.10 lux 0.00625 lux 0.05 lux 0.003125 lux 0.0 lux

mm f/1.6 0.12 lux 0.0075 lux 0.06 lux 0.00375 lux 0.0 lux

9-20

3D Noise Reduction Yes (ON / OFF selectable)

Color Mono

33 ms 500 ms 33 ms 500 ms

Mono (IR on)

TECHNICAL SPECIFICATIONS

LENS

Lens Type Built-in; varifocal
Focal Length f/1.3, 2.8 ~ 8 mm,

f/1.5, 8 ~ 20 mm,
f/1.5, 4 ~ 9 mm,

f/1.6, 9 ~ 20 mm
Focus Autofocus, motorized
Zoom Remote motorized
Auto Iris Type P-Iris
Field of View in Degrees*
*Note: Field of view may vary with changes in resolution settings.

Lens

2.8 - 8 mm

8 - 20 mm

4 - 9 mm

9 - 20 mm

Angle of

View

Diagonal 136.4° ~ 47.4° 137.9° ~ 47.8°

Horizontal 115.7° ~ 41.3° 106° ~ 38.2°

Vertical 62.4° ~23.2° 77° ~ 28.7°

Diagonal

Horizontal 36.5° ~ 15°

Vertical 27° ~ 11.3°

Diagonal

Horizontal 116.9° ~ 50.8° 116.9° ~ 50.8°

Vertical 60.7° ~ 28.5° 60.7° ~ 28.5°

Diagonal

Horizontal 50.1° ~ 22.3°

Vertical 27.1° ~ 12.6°

2 MP 3 MP 5 MP

46.5° ~ 18.8°

141.8° ~ 58.4° 141.8° ~ 58.4°

N/A

N

/A

AUDIO

Streaming Bidirectional: full or half duplex
Input Line level, 3K ohm differential with/1Vp-p

maximum si
Output Line level, 600 ohm differential with/1Vp-p
Encoding G.711-Alaw/G711-Ulaw

gnal

GENERAL

Pan/Tilt Adjustment Manual

Pan 0° ~ 360°
Tilt 7.5° ~ -90°

Rotation 0° ~ 360°
Construction Aluminum with polycarbonate window
Finish White, RAL 9003
Weight Unit Shipping

EPA 51.2 in

3.5 lb (1.59 kg) 4.3 lb (1.95 kg)

2

4 K

N/A N/A

58.7° ~ 25.6°

N/A

ENVIRONMENTAL

Operating Temperature –50° to 60°C (–58° to 140°F), 4 Hours

Start-up Temperature –40°C (–40°F)
Storage Temperature –40° to 60°C (–40° to 140°F)
Operating Humidity 10 to
Storage Humidity 20 to 80%, RH noncondensing
Impact Resistance IK10 (20 J)
Ingress Protection IP66, IP67, IP68, IP69K, Type 4X
Shock and Vibration
Resistance Tested in accordance to EN 50155 (EN 61373,

Maximum Operating Temperature 65°C

(149°F)

100%, RH condensing

Category 1, Class B); IEC/EN 60068:2-6 and 2­27

TECHNICAL SPECIFICATIONS

ELECTRICAL

Network Port RJ-45 connector for 100Base-TX*/

1000Base-T, Automatic MDI/MDI-X

*Some combinations of high resolution, frame rate, and high numbers of

unicast streams, may lead to less desirable results at 100Base-TX.

Input Power PoE+ (

Power Consumption

12 VDC 8.1 W typical, 20.5 W maximum
24 VAC 7.4 W typical, 1
PoE+ 7.6 W typical, 16.8 W maximum

Local Storage Micro SD, SDHC, SDXC compatible;

Alarm Detects open or closed alarm state

Input Quantity 1, Normally Open, Normally Closed,

Output Quantity 1, ±32 VDC maximum, 150 mA

IEEE 802.3at, Class 4), 24 VAC (18 ~

32 VAC), 12 VDC ±10% (Environmental
models)

8.1 W maximum

Up to 2 TB addressable (256 GB testable)

Supervised,

3.5 VDC maximum, 35 mA maximum

maximum

NETWORK

Supported Protocols TCP/IP, UDP/IP (Unicast, Multicast IGMP),

Users

Unicast Two guaranteed (up to 20 depending on the

Multicast Unlimited

Security Access Password protected, HTTP, IEEE 802.1X,

Software Interface Web browser view and setup

UPnP, DNS, DHCP, RTP, RTSP, NTP, IPv4, IPv6,
SNMP v2c/v3,
FTP, 802.1x (EAP), and NTCIP 1205, IGMP,
TLS/TTLS

resolution settings)

digest authentication, IP filtering

QoS, HTTP, HTTPS, SSL, SMTP,

INTEGRATION

Pelco System Integration VideoXpert;

Endura 2.0 (or later);
Digital Sentry 7.3 (or later)

Open API Pelco API or ONVIF Profile S, Profile G, Profile

T
Mobile Application Pelco Mobile Application
Camera Discovery VxToolbox
Firmware Upgrade Web UI or VxToolbox
Multilingual User Interface English, French, Italian, German, Spanish,

Korean, Portuguese, Russian, Simplified

Chinese, Turkish

MINIMUM SYSTEM REQUIREMENTS

Processor Intel® Core™ i3 processor, 2.4 GHz
Operating System Microsof

Memory 4 GB RAM
Network Interface 1 gigabit (or greater)
Monitor Minimum of 1024 x 768 resolution,

Web Browser Internet Explorer

t® Windows® 7 (32- and 64-bit), or
DirectX®11, Windows XP Service Pack 3 with
DirectX 9.0c; or Mac

16- or 32-bit pixel color resolution

™

(51 or later), Microsoft Edge, or

Chrome
Mozilla® Firefox® 3.5 (or later)

®

OS X 10.4 (or later)

®

10 (or later), Google

TECHNICAL SPECIFICATIONS

10.10
(3.98)

8.50

(3.35)

Ø 15.00

(5.91)

4.6

(1.81)

8.30

(3.27)

16.51
(6.50)

8.25

(3.25)

5.95

(2.35)

8.30

(3.27)

0.48

(0.19)

6.93

(2.73)

2X 6.27

(2.47)

2X R 0.50

(1.27)

7.65

(3.01)

39º

17.78 (7.00)

4.60

(1.81)

4.10

(1.61)

4.60

(1.81)

8.30

(3.27)

2X
Ø 3.17 (1.25)

9X

Ø 0.54 (0.21)

3.56

(1.40)

2.22

(0.87)

8.89

(3.50)

2.30 (0.90)

4.15 (1.63)

VIDEO

Video Streams Up to three simultaneous streams, the second

Available Resolutions 4 K 3840 x 2160 to 512 x 384;

Maximum Frame Rate Up to 120 fps at 1080p on the 3MP models,

Video Encoding H.265, H.264 Main/High, MJPEG
Bit Rate Control Constrained variable bit rate (CVBR) and

Orientation Modes Electronic image rotation 90, 180, and 270

Video Snapshot JPEG capture at the same resolution as the

Window Blanking 16 configurable Windows
Electronic Image

ization Yes (ON / OFF selectable)

Stabil
Video Overlay Camera name, time, date, and customizable

Flicker Correction Selectable Auto On/Off, 50 Hz or 60 Hz modes

stream and third stream are variable based on
the setup of the primary stream

5 MP 2592 x 1944 to 512 x 384;
3 MP 2048 x 1536 to 640 x 360;
2 MP 1920 x 1080 to 512 x 384

Up to 60 fps at 1080p on all models,

to 30 fps at full resolution with WDR on all

Up
models

constant bit rate (CBR)

degrees (Corridor Mode)

highest stream configured

text with multiple supported languages.
Embedding of custom images and logos
supported.

CERTIFICATIONS/RATINGS

• CE (Class A)

• FCC (Class A)

• ICES-003 (Class A)

• UL/cUL Listed

• UL/IEC/EN 60950-1, 60950-22, 62368-1

• KC*

• NOM

• RCM

• EAC*

• BIS

• Type 4X

• EN 50155 (EN 61

373 Category 1, Class B)

• IEC/EN 60068-2-6 Product Vibration

• IEC/EN 60068-2-27 Product Shock

• IEC/EN 62262 Impact (IK 10)

• IEC/EN 60529 (IP66, IP67, IP68)

• DIN 40 050 Part 9 (IP69K)

• Meets NEMA TS-2 para 2.2.7 - 2.2.9

• FDOT*

• ONVIF Profile S, Profile G, and Profile T Conformant

*At the time of this publication, certifications are pending. Consult the

factory or www.pelco.com for the current status of cert

ifications.

RECOMMENDED MOUNTS

IBP3-PLMT Pole mount
IBP3-PLMT
with IBP3BBAP-ES Pole mount
IBP3BBAP-ES Wall mount
IBP3BBAP-EI In-ceiling mount

VALUES IN PARENTHESES ARE INCHES; ALL OTHERS ARE
CENTIMETERS

POWER SUPPLIES

WCS Series Outdoor, 24 VAC power supply
POE130-XT Single-port PoE Gigabit extender powered by

IBP3BBAP-EI ENVIRONMENTAL IN-CEILING MOUNT BACK BOX AND

ADAPTER PLATE

POE130-AT (US or EU) Single-port PoE+ midspan with power cord
POE430-AT (US or EU) 4-port, 30W per port PoE midspan with power

POE190-BT injector

cord

POE1236-AT (US or

EU) 12-port, 36W PoE midspan

POE2436-AT (US or EU) 24-port, 36W PoE midspan

IBP3-PLMT ENVIRONMENTAL POLE MOUNT

RAL 9003

RAL 9003

TECHNICAL SPECIFICATIONS

5.83

(2.30)

Ø 14.91

(5.87)

Ø 15.52

(6.11)

4.6

(1.81)

8.30

(3.27)

MODELS

Resolution Model Number Lens Description

2 MP IBE238-1ER 2.8 ~ 8 mm Sarix Enhanced Environmental Bullet

3 MP IBE332-1ER 8

3 MP IBE338-1ER 2.8

5 MP IBE539-1ER 4 ~ 9 mm Sarix Enhanced Environmental Bullet

4 K IBE839-1ER 4

4 K IBE832-1ER 9

IBP3BBAP-ES ENVIRONMENTAL SURFACE MOUNT BACK BOX

AND ADAPTER PLATE

~ 20 mm Sarix Enhanced Environmental Bullet

~ 8 mm Sarix Enhanced Environmental Bullet

~ 9 mm Sarix Enhanced Environmental Bullet 4 K

~ 20 mm Sarix Enhanced Environmental Bullet 4 K

RAL 9003

Pelco, Inc.

625 W. Alluvial, Fresno, California 93711 United States

USA & Canada Tel [phone] Fax [phone]
International Tel [phone] Fax [phone]
www.pelco.com

Pelco, the Pelco logo, and other trademarks associated with Pelco products referred

to in this publication are trademarks of Pelco, Inc. or its affiliates. ONVIF and the

ogo are trademarks of ONVIF Inc. All other product names and

ONVIF l

Product specifications and availability are subject to change without notice.

services are the property of their respective companies.

©Copyright 2020, Pelco, Inc. All rights reserved.