Pelco HS8134, HS8080 Specsheet
PRODUCT SPECIFICATION
camera solutions
HS8080/HS8134 Enclosure
HIGH SECURITY, INDOOR, CEILING MOUNT
Product Features
• Low Cost
• Indoor or Outdoor (Moderate Environment) Applications
• Aluminum (HS8080) or Steel (HS8134) Construction
• Adjustable Camera Mount
• Mounts Directly to Ceiling
• Attractive, Rugged Powder Coat Finish
• Single Tamper-Proof Screw Provides Quick Access and Increased
Security
• Tamper Switch Standard Feature on HS8080
The
HS8080/HS8134
designed for applications requiring maximum protection from
vandalism. The
for moderate damage resistance; the
heavy gauge steel for high damage resistance.
HS8080
are high security ceiling mount enclosures
is constructed from heavy gauge aluminum
HS8134
is constructed from
6.63
(16.84)
5.00 (12.70)
HS8080
13.00 (33.02)
5.00
(12.70)
The
HS8080/HS8134
feature a hinged lower cover that swings down
to allow easy access to the camera and lens. The removable camera
mount can be easily positioned for various viewing angles, and conduit
knockouts allow cabling to be delivered from the wall (either side) or
ceiling.
There is no exposed mounting hardware securing the
HS8080/HS8134
to its mounting surface. Opening the enclosure can only be accomplished with a specially designed tool (included), eliminating the
possibility of the enclosure being opened by unauthorized persons. A
factory-installed tamper switch is mounted on the secured access
cover of the
HS8080
. An impact-resistant Lexan
®
window is supplied
with the enclosure.
The
HS8080/HS8134
are also ideal for use in outdoor applications
such as parking garages or other applications offering protection from
environmental elements.
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;
ALL OTHERS ARE INCHES.
C1466 / REVISED 10-02
U.S. Patent
#403,340, #6,019,524
International Standards
Organization Registered Firm;
ISO 9001 Quality System
TECHNICAL SPECIFICATIONS
MODELS
HS8080 High security enclosure constructed from
HS8134 High security enclosure constructed from
MECHANICAL
Enclosure Mounting Four 0.25-inch (0.63 cm) holes on mounting
Camera Mounting Removable, adjustable camera mount
Maximum Camera
and Lens Size Accepts camera and lens combinations*
Viewing Window
HS8080 0.25-inch (6.35 mm) thick Lexan
HS8134 0.50-inch (12.7 mm) thick Lexan
Viewing Window Area 3.25" W x 4.75" H
Cable Entry Three 0.875-inch (2.22 cm) diameter
Security Tamper-resistant screw (hollow Allen wrench
Tamper Switch Plunger type door switch with “pull-to-cheat”
*Assumes lens is fully extended.
heavy gauge aluminum. Moderate damage
resistance
heavy gauge steel. High damage resistance
surface
(including BNC connector) up to:
3.50" H x 3.00" W x 9.75" L
(8.89 x 7.62 x 24.77 cm)
®
®
(8.25 x 12.07 cm)
knockouts; will accept 0.5-inch (1.27 cm)
conduit fitting.
One each on flat mounting surface and sides
of enclosure
supplied)
feature
ELECTRICAL
Tamper Switch 0.25-inch (0.63 cm) quick connect. N.O./N.C.
10A maximum switching current
125 VAC maximum switching voltage
GENERAL
Construction
HS8080 0.080-inch (2.03 mm) aluminum
HS8134 10 gauge CRS, 0.134-inch (3.40 mm)
Finish Gray polyester powder coat
Environment Indoor or outdoor (in covered or protected
environment)
Unit Weight
HS8080 2.65 lb (1.20 kg)
HS8134 4.15 lb (1.88 kg)
Shipping Weight
HS8080 3 lb (1.35 kg)
HS8134 5 lb (2.27 kg)
CERTIFICATIONS/RATINGS/PATENTS
• Meets NEMA Type 1 standards
• U.S. Patents 403,340 and 6,019,524
Pelco, Inc. Worldwide Headquarters:
3500 Pelco Way, Clovis, California 93612-5699 USA
USA & Canada
International
www.pelco.com
Tel: (800) 289-9100 • FAX: (800) 289-9150
Tel: +1 (559) 292-1981 • FAX: +1 (559) 348-1120
Pelco and the Pelco logo are registered trademarks of Pelco, Inc.
Lexan is a registered trademark of the General Electric Company.
Product specifications and availability subject to change without notice.
©Copyright 2002, Pelco, Inc. All rights reserved.
Loading...