Pelco HS4100BH User Manual 2

C491SM (3/99) HS4100BH High-Security Camera Enclosure

300 W. Pontiac Way, Clovis, CA 93612-5699 USA

In North America & Canada: Tel (800) 289-9100 FAX (800) 289-9150 DataFAX (800) 289-9108

International Customers: Tel (1-559) 292-1981 FAX (1-559) 348-1120 DataFAX (1-559) 292-0435

Pelco Online http://www.pelco.com

LISTED

IMPORTANT SAFEGUARDS AND WARNINGS

Observe the following WARNINGS before installing and using this product.

1. Installation and servicing should be done by qualified service personnel only and conform to all local codes.

2. Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X, 6, or 6P enclosure, it is designed for indoor use only and must not be installed where exposed to rain and moisture.

3. Use only replacement parts Pelco recommends.

4. The installation method and materials should be able to support four times the weight of the enclosure, pan and tilt, camera and lens combination.

5. The camera and lens combination shall not exceed 20 pounds (9.06 kg).

The product may bear the following marks:

This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit.

This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.

Please thoroughly familiarize yourself with the information in this manual prior to installation and operation.

CAUTION:

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

DESCRIPTION

The HS4100BH is a high-security camera enclosure designed to be mounted in indoor walls in applications requiring maximum protection against vandalism.

MAINTENANCE

Performing maintenance at regularly scheduled intervals will help prolong the equipment’s operational life and appearance. Clean the Lexan® window with a mild non-abrasive detergent in water and a soft cloth regularly to help keep the picture clear. For a very dirty window, use vinyl cleaner.

EXPLODED ASSEMBLY DIAGRAM

See Figure 1 for an exploded assembly diagram of the HS4100BH high-security camera enclosure.

Item No. Qty Description Part Number

1 1 Window, Lexan®, 5.75" x 4" x .5", MR5 AH800010001 2 1 Enclosure assembly HS41001020WA 3 1 Front cover HS41004024COMP 4 1 Tilt table AH80004013COMP 5 1 Tilt table mounting bracket AH80004014COMP 6 1 Hinge HS41004027COMP 7 1 Rear plate HS41004022COMP 8 6 Screw, 1/4-20 x 1/2", Tampruf #10 ZH1/4-20X.5SRT

9 1 Socket, Tampruf #10, 1/4" drive (not shown) ZTSOCKET10 10 1 Switch bracket HS30004113COMP 11 1 Tamper switch SWI1DM401

Figure 1. HS4100BH Exploded Assembly Diagram

WARRANTY AND RETURN INFORMATION

WARRANTY

Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below:

• Three years on Genex™ Series (multiplexers, server, and keyboard).

• Two years on all standard motorized and fixed focal length lenses.

• Two years on Esprit™, Legacy CM8500/CM9500/CM9750/CM9760 Matrix, Spectra Fixed Dome products.

• Two years on WW5700 series window wiper (excluding wiper blades).

• Two years on cameras.

• Six months on all pan and tilts, scanners or preset lenses used in continuous motion applications (that is, preset scan, tour and auto scan modes).

Pelco will warrant all replacement parts and repairs for 90 days from the date of Pelco shipment. All goods requiring warranty repair shall be sent freight prepaid to Pelco, Clovis, California. Repairs made necessary by reason of misuse, alteration, normal wear, or accident are not covered under this warranty.

Pelco assumes no risk and shall be subject to no liability for damages or loss resulting from the specific use or application made of the Products. Pelco’s liability for any claim, whether based on breach of contract, negligence, infringement of any rights of any party or product liability, relating to the Products shall not exceed the price paid by the Dealer to Pelco for such Products. In no event will Pelco be liable for any special, incidental or consequential damages (including loss of use, loss of profit and claims of third parties) however caused, whether by the negligence of Pelco or otherwise.

The above warranty provides the Dealer with specific legal rights. The Dealer may also have additional rights, which are subject to variation from state to state.

, Intercept®, PV1000 Series, CM6700/

, DF5 Series and DF8

If a warranty repair is required, the Dealer must contact Pelco at (800) 2899100 or (559) 292-1981 to obtain a Repair Authorization number (RA), and provide the following information:

1. Model and serial number

2. Date of shipment, P .O. number, Sales Order number , or Pelco invoice number

3. Details of the defect or problem

If there is a dispute regarding the warranty of a product which does not fall under the warranty conditions stated above, please include a written explanation with the product when returned.

Ship freight prepaid to: Pelco

Method of return shipment shall be the same or equal to the method by which the item was received by Pelco.

RETURNS

In order to expedite parts returned to the factory for repair or credit, please call the factory at (800) 289-9100 or (559) 292-1981 to obtain an authorization number (CA number if returned for credit, and RA number if returned for repair). Goods returned for repair or credit should be clearly identified with the assigned CA/RA number and freight should be prepaid. All merchandise returned for credit may be subject to a 20% restocking and refurbishing charge.

Ship freight prepaid to: Pelco

300 West Pontiac Way Clovis, CA 93612-5699

REVISION HISTORY

Manual # Date Comments

C491SM 3/99 Original version.