Pelco HS3020 User Manual

®

HS3000/HS3020

High-Security

Enclosures

Installation/

Operation Manual

C483M-E (9/97)

Pelco • 3500 Pelco Way, Clovis, CA 93612-5699 • USA • www.pelco.com
In North America and Canada: Tel [phone] • FAX [phone]

International Customers: Tel [phone] or FAX [phone]

CONTENTS

Section Page

1.0 GENERAL .................................................................................................. 1

1.1 IMPORTANT SAFEGUARDS AND WARNINGS ............................... 1

1.2 UNPACKING INSTRUCTIONS ..........................................................2

1.3 RECOMMENDED TOOLS .................................................................2

2.0 DESCRIPTION .......................................................................................... 3

2.1 MODELS ............................................................................................3

2.2 OPTIONS ........................................................................................... 3

3.0 INSTALLATION .......................................................................................... 4

4.0 MAINTENANCE .........................................................................................6

5.0 EXPLODED ASSEMBLY DRAWING .........................................................7

6.0 SPECIFICATIONS .....................................................................................8

7.0 WARRANTY AND RETURN INFORMATION ...........................................10

LIST OF ILLUSTRATIONS

Figure Page

1 HS3000/HS3020 Exploded Assembly Drawing ................................. 7

2 HS3000/HS3020 Dimension Drawing ................................................ 9

LIST OF TABLES

Table Page

AVideo Coaxial Cable Wiring Distances .............................................. 5

B 24 VAC Wiring Distances ................................................................... 5

C HS3000/HS3020 Exploded Assembly Parts List ............................... 7

REVISION HISTORY

Manual # Date Comments

C483M 8/89 Original manual, created for AH3000.

C483M 6/90 Rev. A. Manual revised/updated to reflect model

C483M 5/91 Rev. B. Manual design revised.

C483M 12/91 Rev. C. Manual revised to reflect new HS3020 model

C483M-D 9/95 Rev. D. Manual revised to include optional tamper

C483M-E 2/96 Rev. E. Revised to include updated specification

number change to HS3000.

information, revised dimension drawing and revised
parts list.

switch installation information; as well as new mounting
template and manual style.

description, installation instructions, and part numbers
for tamper switch update per ECO# 95-357.

9/97 Revised manual to new format. Added Tables A and B.

ii

12 Pelco Manual C483M-E (9/97)

Added HS3020CA to list of options.

1.0 GENERAL

1.1 IMPORTANT SAFEGUARDS AND WARNINGS

Prior to installation and use of this product, the following WARNINGS should be
observed.

1. Installation and servicing should only be done by Qualified Service Personnel
and conform to all Local codes.

2. Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X, 6, or
6P enclosure, it is designed for indoor use only and it must not be installed
where exposed to rain and moisture.

3. Only use replacement parts recommended by Pelco.

4. The installation method and materials should be capable of supporting four
(4) times the weight of the enclosure, camera and lens combination.

5. The camera and lens combination shall not exceed 40 lbs (18 kg).

The product and/or manual may bear the following marks:

This symbol indicates that dangerous voltage constituting a
risk of electric shock is present within this unit.

This symbol indicates that there are important operating and
maintenance instructions in the literature accompanying this
unit.

CAUTION:

RISK OF

ELECTRIC SHOCK.

DO NOT OPEN.

TO REDUCE THE RISK OF ELECTRICAL SHOCK,

DO NOT REMOVE COVER. NO USER-

SERVICEABLE PARTS INSIDE. REFER SERVICING

TO QUALIFIED SERVICE PERSONNEL.

CAUTION:

Please thoroughly familiarize yourself with the information

in this manual prior to installation and operation.

Pelco Manual C483M-E (9/97) 1

1.2 UNPACKING INSTRUCTIONS

Unpack and inspect all parts carefully.

The following parts are supplied:

1 Camera enclosure
1 1/4"-drive socket for tamper-resistant screws
1 7/64" Allen wrench
2 1/4-20 x 1/2" bolts
2 1/4" flat washers
2 1/4" split lock washers

Be sure to save the shipping carton and any inserts. They are the safest material in
which to make future shipments.

If an item appears to have been damaged in shipment, replace it properly in its
carton and contact the factory at 1-800-289-9100 or 1-559-292-1981 for a replace­ment. (International customers fax [phone] for authorization and instruc­tions.)

If an item needs to be returned to the factory for repair, consult the WARRANTY
AND RETURN section of this manual for instructions.

1.3 RECOMMENDED TOOLS

Pelco does not supply basic tools needed for the installation process. The following
tools are recommended:

Hand tools
Drill
Coaxial cable stripper
BNC crimp tool
Wire cutter
Wire stripper

2 Pelco Manual C483M-E (9/97)