Pelco HS3000 Specsheet

PRODUCT SPECIFICATION
HS3000 Enclosure
HIGH SECURITY, INDOOR, CEILING/WALL MOUNT
camera site
Indoor Applications
All-Steel Construction (14-Gauge)
Wall or Ceiling Mounting
2 Window Ports to Choose From
No Exposed Mounting Hardware
Tamper-Proof Fasteners Secure Enclosure
Tamper Switch Standard Feature
The HS3000 is a high security camera enclosure designed for installations such as ATM bank machines, prisons, detention cells, etc., requiring maximum protection from vandalism.
Constructed from medium gauge steel, the enclosure is available in a 10-inch (25.40 cm) length. The HS3000 will accept most cameras with fixed focal and varifocal length lenses. There is no exposed mounting hardware securing the enclosure to its mounting surface. Opening the enclosure can be accomplished only with a specially designed tool, eliminating the possibility of the enclosure being opened by unauthorized personnel. A factory-installed tamper switch is mounted on the secured access cover.
Designed to function as a wall or ceiling enclosure, the HS3000 is versatile because it allows you to re-position the window to the opposite end of the enclosure should the viewing area requirements change. An impact-resistant, 0.25-inch (6.35 mm) thick, smoked
®
Lexan
window is supplied with the enclosure for discreet
surveillance.
5.75
(14.61)
A
B
C
(10.16)
0.50 (1.27) CONDUIT KNOCKOUT 2X
MODEL
HS3000
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;
A
11.00 (27.94)B10.00 (25.40)C6.00 (15.24)
ALL OTHERS ARE INCHES.
(6.99)
Ø 0.39 (0.99) 4X
4.00
2.75
5.00
(12.70)
3.00
(7.62)
An optional 120 VAC or 24 VAC heater kit is available.
C483 / REVISED 1-05
International Standards
Organization Registered Firm;
ISO 9001 Quality System
TECHNICAL SPECIFICATIONS
MODEL
HS3000 High security camera enclosure, 10-inch
(25.40 cm) lower body length, constructed from heavy gauge steel
MECHANICAL
Camera Mounting Adjustable tilt table Maximum
Camera and Lens Size Accepts camera and lens combinations*
(including BNC connector) up to:
3.75" H x 3.25" W x 9.00" L
(9.52 x 8.25 x 22.86 cm) Window Viewing Area 2.75" H x 3.00" W (6.99 x 7.62 cm) Enclosure Mounting Four 0.39-inch (0.99 cm) diameter holes on
protected rear surface Cable Entry Three 0.50-inch (1.27 cm) cable knock-out
holes; two on flat mounting surface and one
on end opposite viewing window Security Two tamper-resistant screws
(hollow Allen wrench supplied) Tamper Switch Plunger type door switch with “pull-to-cheat”
feature
*Assumes lens is fully extended.
ELECTRICAL
Tamper Switch 0.25-inch (0.63 cm) quick connect N.O./N.C.
10A maximum switching current
125 VAC maximum switching voltage
GENERAL
Window Smoked (1 f-stop attenuation),
0.25-inch (6.35 mm) thick Lexan
Construction 0.074-inch (1.87 mm) thick, seam-welded
14-gauge steel Finish Gray polyester powder coat Environment Indoor; 32° to 120°F
(0°C to 49°C) Weight 7.36 lb (3.34 kg) Shipping Weight 9 lb (4.07 kg)
®
CERTIFICATIONS/RATINGS
• UL Listed
• Meets NEMA Type 1 standards
OPTIONAL ACCESSORIES
Heater Kit HKHS3000 Heater kit, 120 VAC, 30W
HKHS3024 Same as HKHS3000 except 24 VAC
Thermostatically controlled on at 40°F (4°C) and off at 60°F (15°C)
Pelco Worldwide Headquarters:
3500 Pelco Way, Clovis, California 93612-5699 USA
USA & Canada Tel: (800) 289-9100 • FAX (800) 289-9150 International Tel: (559) 292-1981 • FAX (559) 348-1120 www.pelco.com
Pelco and the Pelco logo are registered trademarks of Pelco.
Lexan is a registered trademark of the General Electric Company.
Specifications subject to change without notice.
©Copyright 2005, Pelco. All rights reserved.
Loading...