Pelco HS1500 Specsheet

PRODUCT SPECIFICATION

HS1500 Enclosure

HIGH SECURITY, INDOOR, CORNER MOUNT

camera solutions

Product Features

• Vandal Resistant

• Indoor, Corner Mount Applications

• All-Steel Construction

• No Exposed Mounting Hardware

• Tamper Switch Standard Feature

The

HS1500

high security enclosure is designed for applications
such as elevators, parking garages, classrooms, detention cells, etc.,
requiring maximum protection from vandalism. Designed to fit flush
to the ceiling in a corner, an optional hood (HS1500H) is available to
allow the enclosure to be mounted lower on the wall without
compromising security. An impact-resistant clear Lexan

®

window is

a standard feature.

The

HS1500

is constructed of heavy gauge steel and will accept most

CCD cameras with fixed focal length and varifocal lenses.

There is no exposed mounting hardware securing the enclosure to its
mounting surface. Opening the enclosure can be accomplished only
by removing the tamper-resistant screw from the bottom with the
specially designed tool provided, eliminating the possibility of the
enclosure being opened by unauthorized personnel. A factory­installed tamper switch is mounted on the secured access cover.

13.13

(33.35)

6.50

(16.51)

10.00

(25.40)

NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;

ALL OTHERS ARE INCHES.

5.75

(14.61)

12.25

(31.12)

C493 / REVISED 1-07

International Standards

Organization Registered Firm;

ISO 9001 Quality System

TECHNICAL SPECIFICATIONS

MODEL

HS1500 High security corner mount enclosure of

medium size; designed to fit flush with the
ceiling

MECHANICAL

Camera Mounting Adjustable tilt table
Maximum Camera

and Lens Size Accepts camera and lens combinations*

Enclosure Mounting Four 0.390-inch (0.99 cm) diameter holes on

Cable Entry Access through back and top
Security Tamper-resistant screw

Tamper Switch Plunger type door switch with “pull-to-cheat”

*Assumes lens is fully extended.

(including BNC connector) up to:

4.0" H x 4.0" W x 8.0" L
(10.16 x 10.16 x 20.32 cm)

protected rear surface

(hollow Allen wrench supplied)

feature. DM electrical rating 10A, 125 VAC.
N.O./N.C. switch contact

ELECTRICAL

Tamper Switch 0.25-inch (0.63 cm) quick connect N.O./N.C.

10A maximum switching current
125 VAC maximum switching voltage

GENERAL

Window 0.50-inch (12.7 mm) thick Lexan
Construction 0.134-inch (3.40 mm) formed,

10-gauge steel
Finish Gray polyester powder coat
Environment Indoor; 32° to 120°F (0° to 49°C)
Unit Weight 17.37 lb (7.88 kg)
Shipping Weight 20 lb (9.06 kg)

®

CERTIFICATIONS/RATINGS

• UL Listed

• Meets NEMA Type 1 standards

OPTIONAL ACCESSORIES

Heater-Blower Kit

Other

HB1524 24 VAC, 85 watt, heater-blower kit for

HS1500H Hood for mid-wall mounting of HS1500

HS1500 only. Heater activates on at
40°F (4°C) and off at 60°F (15°C)
Blower provides continuous internal air
circulation

Pelco, Inc. Worldwide Headquarters:

3500 Pelco Way, Clovis, California 93612-5699 USA

USA & Canada
International
www.pelco.com

Tel: [phone] • FAX: [phone]

Tel: [phone] • FAX: [phone]

Pelco and the Pelco logo are registered trademarks of Pelco, Inc.

Lexan is a registered trademark of the General Electric Company.

Product specifications and availability subject to change without notice.

©Copyright 2007, Pelco, Inc. All rights reserved.