Pelco G1512-3PJV1AT, EM1512 Specsheet
PRODUCT SPECIFICATION
EH1512 Series Enclosure
INDOOR/OUTDOOR
camera solutions
Product Features
• Cost Effective
• Small, Sleek, Contemporary Design
• High Reliability Die-Cast Construction
• Tethered Lid
• Tamper-Proof Hardware (Available as an Option with the EH-SKIT
Security Kit)
• Cable Entry Glands and Mounting Holes on Bottom of Enclosure
• Designed for Indoor/Outdoor Applications
• Meets IP66 and NEMA Type 4X Standards
• Easy Access for Servicing and Installation
• Models Available with Factory-Installed Low Power Heater and
Blower with 24 VAC Camera Power Supply
• Models with Feedthrough Mount Available
• 3-Year Warranty
The
EH1512 Series
enclosure constructed from die-cast aluminum. The
compact body length of 13.38 (base) and 14.39 (overall) inches
(33.99 and 36.55 cm, respectively).
is an indoor/outdoor, cost effective camera
EH1512
has a
EH1512 ENCLOSURE WITH EM1512 MOUNT
Field-installed options include a heater and blower with 24 VAC
camera power supply and sun shroud. The enclosures also can be
factory-ordered with 24 VAC, 120 VAC, or 230 VAC heater and
blower with 24 VAC camera power supply and sun shroud.
EH1512 Series
having both fixed and variable focal length lenses (with or without
auto iris operation). The tethered, removable lid provides easy
access to the innovative camera sled. Two adjustable glands (PG9
and PG11) on the bottom of the enclosure allow for easy installation
of the power and video cables.
enclosures are for use with analog and IP cameras
The
EH1512 Series
IP cameras and can be mounted to Pelco’s EM1512 (feedthrough wall
mount), EM1450 (non-feedthrough wall mount), or any other Pelco
light to medium duty mount.
An EH-MKIT marine kit is available for EM1512 and EM1450 wall
mounts. The marine kit protects enclosures and wall mounts from
galvanic corrosion.
is ideal for small to medium size analog and
International Standards
Organization Registered Firm;
ISO 9001 Quality System
C3453 / REVISED 5-9-11
TECHNICAL SPECIFICATIONS
MECHANICAL
Camera Mounting Single slot for adjustable camera positioning
Camera and Lens Size Accepts camera and lens combinations*
Viewing Window 0.118-inch (3 mm) thick scratch-resistant
Cable Entry 1 x PG9 and 1 x PG11 compression glands on
Cable Entry Holes 1 x 0.750-inch (1.91 cm) diameter and
Lid Fastening 3 Allen-head screws
*Assumes lens is fully extended
on snap-in camera sled
(including BNC connector)
up to 9.00" L x 3.12" W x 3.00" H
(22.86 x 7.92 x 7.62 cm)
®
Lexan
bottom; PG9 0.312-inch (0.8 cm) and PG11
0.395 (1.0 cm) maximum cable diameters
1 x 0.630-inch (1.6 cm) diameter;
0.750-inch hole will accept 1/2-inch NPT
conduit fitting when enlarged to 0.875-inch;
0.630-inch hole will accept 1/4-inch NPT
conduit fitting
GENERAL
Construction Die-cast aluminum
Finish Alodine with gray polyester powder coat
Environment
†
Indoor/outdoor ambient temperature
–10° to 120°F (–23° to 49°C)
Unit Length
Base 13.38 inches (33.99 cm)
Overall 14.39 inches (36.55 cm)
Weight Unit Shipping
EH1512 2.50 lb (1.13 kg) 4 lb (1.81 kg)
EH1512MT 3.13 lb (1.42 kg) 5 lb (2.27 kg)
EH1512-1 3.25 lb (1.47 kg) 5 lb (2.27 kg)
EH1512-1L 3.25 lb (1.47 kg) 5 lb (2.27 kg)
EH1512-2 2.56 lb (1.16 kg) 4 lb (1.81 kg)
EH1512-3 3.25 lb (1.47 kg) 5 lb (2.27 kg)
EH1512-1MT 3.88 lb (1.76 kg) 5 lb (2.27 kg)
EH1512-1LMT 3.88 lb (1.76 kg) 5 lb (2.27 kg)
EH1512-2MT 3.19 lb (1.45 kg) 4 lb (1.81 kg)
EH1512-3MT 3.88 lb (1.76 kg) 5 lb (2.27 kg)
EH1512-1MTS 4.76 lb (2.16 kg) 6 lb (2.72 kg)
EH1512-1LMTS 4.76 lb (2.16 kg) 6 lb (2.72 kg)
EH1512-2MTS 4.07 lb (1.85 kg) 5 lb (2.27 kg)
EH1512-3MTS 4.76 lb (2.16 kg) 6 lb (2.72 kg)
†
Check the environmental specification for your particular camera/lens.
CERTIFICATIONS
•CE
• UL /cUL Listed
• Meets NEMA Type 4X and IP66 standards
EH1512 WITH SS1512 SUN SHROUD
AND EM1512 MOUNT
3.80
(9.65)
4.94
(12.55)
SS1512 SUN SHROUD
4.47
(11.35)
3.78 (9.60)
EH1512 SERIES ENCLOSURE
3.27 (8.31)
16.01 (40.67)
2.64 (6.71)
14.00 (35.56)
14.39 (36.55)
13.38 (33.99)
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS; ALL OTHERS ARE INCHES.
Loading...