Pelco FRV40S1FC, FRV40M1ST, FRV40S1ST Specsheet

PRODUCT SPECIFICATION

transmission & power

FTV40/FRV40 Fiber Transmitter and Receiver

4-CHANNEL DIGITALLY ENCODED VIDEO

Product Features

• 10-Bit Digitally Encoded Video for High-Quality Multichannel Video

Transmission over a Single Fiber

• Multimode Fiber Support for Distances up to 2 km (1.2 mi)

• Single-Mode Fiber Support for Distances up to 69 km (42.9 mi)

• Exceeds All Requirements for EIA RS-250C Short-Haul

Transmission Specifications

• Laser Diode for Transmission of Optical Signals

• Compatible with NTSC, PAL, or SECAM Video Standards

• Designed to Meet NEMA TS 1/TS 2 and Caltrans Traffic Signal

Control Equipment Environmental Standards

• Voltage Transient Protection on All Power and Signal

Input/Output Lines

• LED Status Indicators for Monitoring All Critical

Operating Parameters

• Stand-Alone or Rack-Mountable Modular Design

FRV40M1ST

The FTV40/FRV40 fiber transmitter and receiver transmit four channels of video over one optical fiber. The FTV40 transmitter and FRV40 receiver are available in multimode and single-mode versions.

The FTV40/FRV40 plug-and-play design ensures ease of installation by requiring no electrical or optical adjustments. Modular in design, FTV40 and FRV40 units can be rack-mounted using the EURACK/USRACK chassis, or stand-alone modules can be placed on a desktop or mounted to a wall (wall mount kit not required).

For stand-alone and wall mount installations, external power is required for the FTV40/FRV40 units. The units can be powered with the recommended FEXTPS fiber external power supply.

International Standards

Organization Registered Firm;

ISO 9001 Quality System

C3918 / NEW 6-7-12

TECHNICAL SPECIFICATIONS

MODELS

Transmitter

FTV40M1ST FRV40M1ST ST 1 1310 nm 16 dB 2 km (1.2 mi)

FTV40S1ST FRV40S1ST ST 1 1310 nm 23 dB 69 km (42.9 mi)

FTV40S1FC FRV40S1FC FC 1 1310 nm 23 dB 69 km (42.9 mi)

Note: This product requires a fiber installation with a minimum 30 dB connector return loss.

Compatible

Receiver

Fiber Optical

Connector Type

Multimode (62.5/125 µm)

Single Mode (9/125 µm)

Number

of Fibers

Wavelength

Optical Power

Budget

Maximum

Transmission

Distance

VIDEO

Number of Channels 4 Video Input (FTV40/

Video Output (FRV40) 1.0 Vp-p, 75 ohms; NTSC, PAL, SECAM Overload >1.5 Vp-p Bandwidth (minimum) 10 to 6.5 MHz Differential Gain <2% Differential Phase <0.7° Tilt <1% Signal-to-Noise Ratio 67 dB typical Max. Coaxial Cable (RG59) 100 m (300 ft) camera to fiber optic module to

maintain 6 Mhz bandwidth

ELECTRICAL

Power

Surface Mount 8 to 15 VDC at 3 W

Rack Mount Provided by rack MTBF >100,000 hours Current Protection Automatic resettable solid-state current

limiters Circuit Board Meets IPC standards LED Indicators Video Sync, Power

MECHANICAL

Connectors

Power Terminal block Optical ST or FC Video BNC (gold-plated center pin)

Number of Rack Slots 1

GENERAL

Dimensions 15.5 × 13.5 × 2.8 cm

Operating Temperature –40° to 75°C (–40° to 167°F) Storage Temperature –40° to 85°C (–40° to 185°F) Relative Humidity 0 to 95%, noncondensing Unit Weight 0.4 kg (0.9 lb) Shipping Weight 0.9 kg (2.0 lb)

(6.1" D × 5.3" W × 1.1" H)

CERTIFICATIONS/RATINGS*

• CE, Class A

• FCC, Class A

• UL/cUL Listed

•C-Tick

• Designed to meet NEMA TS 1/TS 2 and Caltrans traffic signal control equipment environmental standards

*At the time of this printing, all certifications are pending. Please

consult the factory, our Web site (www.pelco.com), or the most recent B.O.S.S.

update for the current status of certifications.

RECOMMENDED ACCESSORIES

EURACK 4 RU rack accessory with European power

USRACK 4 RU rack accessory with North American

FEXTPS Fiber External Power Supply with multiple

supply

power supply

plug adaptors (North American, Australian, United Kingdom, and European); 100 to 240 VAC, 50 to 60 Hz input, 9 VDC output

Pelco by Schneider Electric

3500 Pelco Way, Clovis, California 93612-5699 United States

USA & Canada Tel (800) 289-9100 Fax (800) 289-9150 International Tel +1 (559) 292-1981 Fax +1 (559) 348-1120 www.pelco.com

Pelco, the Pelco logo, and other tra demarks associated with Pelco products referred

to in this publication are trademarks of Pelco, Inc. or its affiliates. All other

product names and services are the prope rty of their respective companies.

Product specifications and availability are subject to change without notice.