Pelco FRV40D2S1ST, FRV40D2M1ST Specsheet
PRODUCT SPECIFICATION
transmission & power
FTV40D2/FRV40D2 Fiber Transmitter and Receiver
4-CHANNEL VIDEO WITH BIDIRECTIONAL DATA AND CONTACT CLOSURE
Product Features
• 10-Bit Digitally Encoded Video for High-Quality Transmission over a
Single Fiber
• 2 Bidirectional Data Channels Support RS-232, RS-422 and
RS-485 (2-wire/4-wire), Manchester, and Bi-Phase Communication
• 1 Bidirectional Contact Closure
• Multimode Fiber Support for Distances up to 2 km (1.2 mi)
• Single-Mode Support for Distances up to 69 km (42.9 mi)
• Exceeds All Requirements for the RS-250C Short-Haul
Transmission Specification
• Laser Diode for Transmission of Optical Signals
• Compatible with NTSC, PAL, and SECAM Video Standards
• Designed to Meet NEMA TS 1/TS 2 and Caltrans Traffic Signal
Control Equipment Environmental Standards
• Voltage Transient Protection on All Power and Signal
Input/Output Lines
• LED Status Indicators for Monitoring All Critical
Operating Parameters
• Hot-Swappable Rack Modules
• Stand-Alone or Rack-Mountable Modular Design
2
FRV40D2M1ST
The FTV40D2/FRV40D2 fiber transmitter and receiver transmit four
channels of unidirectional video, two channels of bidirectional data,
and one bidirectional contact closure over one optical fiber in a
two-slot wide design. The FTV40D2 transmitter and FRV40D2
receiver are available in multimode and single-mode versions.
The FTV40D2/FRV40D2 plug-and-play design ensures ease of
installation and no electrical or optical adjustments are required.
Modular in design, FTV40D2 and FRV40D2 units can be
rack-mounted using the EURACK/USRACK chassis, or stand-alone
modules can be placed on a desktop or mounted to a wall (wall
mount kit not required).
For stand-alone and wall mount installations, external power is
required for the FTV40D2/FRV40D2 units. The units can be powered
with the recommended FEXTPS fiber external power supply.
International Standards
Organization Registered Firm;
ISO 9001 Quality System
C3923 / NEW 6-7-12
TECHNICAL SPECIFICATIONS
MODELS
Transmitter
FTV40D2M1ST FRV40D2M1ST ST 1 1310/1550 nm 16 dB 2 km (1.2 mi)
FTV40D2S1ST FRV40D2S1ST ST 1 1310/1550 nm 23 dB 69 km (42.9 mi)
FTV40D2S1FC FRV40D2S1FC FC 1 1310/1550 nm 23 dB 69 km (42.9 mi)
Note: This product requires a fiber installation with a minimum 30 dB connector return loss.
Compatible
Receiver
Fiber Optical
Connector Type
Multimode (62.5/125 µm)
Single Mode (9/125 µm)
Number
of Fibers
Wavelength
Optical Power
Budget
Maximum
Transmission
Distance
VIDEO/ELECTRICAL
Number of Channels 4
Video Input (FTV40D2)/
Video Output (FRV40D2 1.0 Vp-p, 75 ohms; NTSC, PAL, SECAM
Overload >1.5 Vp-p
Bandwidth 10 to 6.5 MHz per channel
Differential Gain <2%
Differential Phase <0.7°
Tilt <1%
Signal-to-Noise Ratio 67 dB at maximum optical loss budget
Max. Coaxial Cable (RG59) 100 m (300 ft) camera to fiber optic module to
maintain 6 Mhz bandwidth
Power
Surface Mount 8 to 15 VDC at 4 W
Rack Mount Supplied by rack
MTBF >100,000 hours
LED Indicators Link, Video, Data
DATA
Number of Channels 2
Data Communication RS-232, RS-422, RS-485 (2-wire or 4-wire),
Manchester, and Bi-phase
Data Rate 250 Kbps
CONTACT CLOSURE
Number of Channels 1
Input Dry
Output SPST relay, 0.5 contact rating
GENERAL
Dimensions 15.5 × 13.5 × 5.6 cm
Operating Temperature –40° to 75°C (–40° to 167°F)
Storage Temperature –40° to 85°C (–40° to 185°F)
Relative Humidity 0 to 95%, noncondensing
Unit Weight 0.6 kg (1.3 lb)
Shipping Weight 0.9 kg (2.0 lb)
(6.1" D × 5.3" W × 2.2" H)
CERTIFICATIONS/RATINGS*
• CE, Class A
• FCC, Class A
• UL/cUL Listed
•C-Tick
• Designed to meet NEMA TS 1/TS 2 and Caltrans traffic signal control
equipment environmental standards
*At the time of this printing, all certifications are pending. Please
consult the factory, our Web site (www.pelco.com), or the most
recent B.O.S.S.
®
update for the current status of certifications.
RECOMMENDED ACCESSORIES
EURACK 4 RU rack accessory with European power
USRACK 4 RU rack accessory with North American
FEXTPS Fiber External Power Supply with multiple
supply
power supply
plug adaptors (North American, Australian,
United Kingdom, and European);
100 to 240 VAC, 50 to 60 Hz input,
9 VDC output
MECHANICAL
Connectors
Optical ST or FC
Power Terminal block
Video BNC (gold-plated center pin)
Data Terminal block
Number of Rack Slots 2
Pelco by Schneider Electric
3500 Pelco Way, Clovis, California 93612-5699 United States
USA & Canada Tel (800) 289-9100 Fax (800) 289-9150
International Tel +1 (559) 292-1981 Fax +1 (559) 348-1120
www.pelco.com
Pelco, the Pelco logo, and other tra demarks associated with Pelco products referred
to in this publication are trademarks of Pelco, Inc. or its affiliates. All other
product names and services are the prope rty of their respective companies.
Product specifications and availability are subject to change without notice.
©Copyright 2012, Pelco, Inc. All rights reserved.
Loading...